Home About us Contact
|
Home About us Contact | ||
|
|
||
Smooth Surface (smooth + surface)
Kinds of Smooth Surface Selected AbstractsRandom Copolymer Films with Molecular-Scale Compositional Heterogeneities that Interfere with Protein AdsorptionADVANCED FUNCTIONAL MATERIALS, Issue 21 2009Salmaan H. Baxamusa Abstract Smooth surfaces with compositional heterogeneities at a molecular-length scale are presented with the goal of disrupting surface,protein interactions. These surfaces are synthesized by utilizing photoinitiated chemical vapor deposition (piCVD) to deposit thin films of random copolymers consisting of highly hydrophilic and highly hydrophobic comonomers. Swellability, wettability, and surface roughness could be systematically controlled by tuning the copolymer composition. The surface composition was dynamic, and the surface reconstructed based on the hydration state of the film. Proteins adsorbed to the copolymer films less readily than to either of the respective homopolymers, indicating a synergistic effect resulting from the random copolymer presenting molecular-scale compositional heterogeneity. These results provide direct evidence that protein adsorption can be disrupted by such surfaces and a simple analytical model suggests that the heterogeneities occur over areas encompassing 4,5 repeat units of the polymer. The synthetic method used to create these films can be used to coat arbitrary geometries, enabling practical utility in a number of applications. [source] Dynamic Sampling and Rendering of Algebraic Point Set SurfacesCOMPUTER GRAPHICS FORUM, Issue 2 2008Gaël Guennebaud Abstract Algebraic Point Set Surfaces (APSS) define a smooth surface from a set of points using local moving least-squares (MLS) fitting of algebraic spheres. In this paper we first revisit the spherical fitting problem and provide a new, more generic solution that includes intuitive parameters for curvature control of the fitted spheres. As a second contribution we present a novel real-time rendering system of such surfaces using a dynamic up-sampling strategy combined with a conventional splatting algorithm for high quality rendering. Our approach also includes a new view dependent geometric error tailored to efficient and adaptive up-sampling of the surface. One of the key features of our system is its high degree of flexibility that enables us to achieve high performance even for highly dynamic data or complex models by exploiting temporal coherence at the primitive level. We also address the issue of efficient spatial search data structures with respect to construction, access and GPU friendliness. Finally, we present an efficient parallel GPU implementation of the algorithms and search structures. [source] PSSS-controlled synthesis of CaCO3 superstructuresCRYSTAL RESEARCH AND TECHNOLOGY, Issue 9 2007Hua Tang Abstract Complex CaCO3 superstructure can be easily synthesized by using poly (sodium 4-styrenesulfonate) (PSSS) as a structure directing agent to direct the controlled precipitation of calcium carbonate from aqueous solution. The products were characterized by scanning electron microscopy (SEM), and powder X-ray diffraction (XRD) analysis. The results revealed that the morphology of the products changed significantly with the increasing of the concentration of PSSS in solution, from rhombohedral particles to plate-packed aggregates to spheres with smooth surface, to sponge-like spheres and finally to complex spherical superstructure consisted of plate-like sub-units. We hypothesize that the observed sequential changes in morphology of CaCO3 particles with added PSSS concentration may be due to the influence of PSSS on nucleation, growth and aggregation of CaCO3 crystals. The formation mechanisms of CaCO3 crystals with different morphologies were discussed. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Port-Wine Stain Nodules in the Adult: Report of 20 Cases Treated by CO2 Laser VaporizationDERMATOLOGIC SURGERY, Issue 8 2001Jesús Del Pozo MD Background. Port-wine stain (PWS) is a congenital vascular malformation of the superficial dermal vessels. These vessels become progressively ectatic, with development of nodular and hypertrophic areas on the surface of the lesions. Objective. To determine the efficacy of CO2 laser vaporization in the treatment of nodules in PWS. Methods. Twenty adult patients with PWS who developed nodules and hypertrophy on the surface of the lesions were treated by CO2 laser vaporization. Only one pass was performed to each area of the lesions, using a continuous and defocused mode, with a power density of 10 W/cm2. When the treated lesion was very large, several sessions of treatment were necessary to vaporize its entire surface. Photographic controls were performed before and after treatment. Results. The nodules and hypertrophy were removed and the smooth surface of the lesions was reestablished. The color, usually violaceous, was transformed in a slight erythema. Conclusion. CO2 laser is a good method for treatment of nodules and hypertrophy in PWS. With adequate precautions, excellent cosmetic results can be obtained. Other more-specific laser systems may be successively used to treat the remaining erythema. [source] Rapid acquisition of operant conditioning in 5-day-old rat pups: A new technique articulating suckling-related motor activity and milk reinforcementDEVELOPMENTAL PSYCHOBIOLOGY, Issue 6 2007Carlos Arias Abstract Newborn rats are capable of obtaining milk by attaching to a surrogate nipple. During this procedure pups show a gradual increase in head and forelimb movements oriented towards the artificial device that are similar to those observed during nipple attachment. In the present study the probability of execution of these behaviors was analyzed as a function of their contingency with intraoral milk infusion using brief training procedures (15 min). Five-day-old pups were positioned in a smooth surface having access to a touch-sensitive sensor. Physical contact with the sensor activated an infusion pump which served to deliver intraoral milk reinforcement (Paired group). Yoked controls received the reinforcer when Paired neonates touched the sensor. Paired pups trained under a continuous reinforcement schedule emitted significantly more responses than Yoked controls following two (Experiment 1) or one training session (Experiment 2). These differences were also observed during an extinction session conducted immediately after training. The level of maternal deprivation before training (3 or 6 hr) or the volume of milk delivered (1.0 or 1.5 µl per pulse) did not affect acquisition or extinction performances. In addition, it was observed that the rate of responding of Paired pups during the early phase of the extinction session significantly predicted subsequent levels of acceptance of the reinforcer. These results indicate that the frequency of suckling-related behaviors can be rapidly modified by means of associative operant processes. The operant procedure here described represents an alternative tool for the ontogenetic analysis of self-administration or behavior processes of seeking. © 2007 Wiley Periodicals, Inc. Dev Psychobiol 49: 576-588, 2007. [source] Localized wall thickening of the gallbladder mimicking a neoplasmDIGESTIVE ENDOSCOPY, Issue 1 2004Katsumi Kimura Clinical diagnosis of chronic cholecystitis is made based on diffuse hyperechoic thickening of the gallbladder wall as shown by ultrasonographic examination. We herein report three cases of chronic cholecystitis showing localized hypoechoic thickening of the gallbladder wall that mimicked gallbladder cancer by ultrasonography. Histologically, hypertrophy of the muscularis propria was a common characteristic finding in these three patients. A smooth surface of the inner hypoechoic layer of the thickened wall was considered to be a reliable finding in the differential diagnosis between this type of chronic cholecystitis and gallbladder cancer. [source] Subterranean species of the ant genus Crematogaster in Asia (Hymenoptera: Formicidae)ENTOMOLOGICAL SCIENCE, Issue 3 2010Shingo HOSOISHI Abstract Three Crematogaster ant species, C. (Orthocrema) javanica Menozzi, C. (O.) myops Forel and C. (O.) masukoi sp. nov., share reduced compound eyes which characterizes them among Asian species of the subgenus Orthocrema. The new species is described based on material from Borneo. It can be distinguished from C. javanica and C. myops by its smooth surface of clypeus and acutely produced subpetiolar process. Reduced compound eyes and yellowish body suggest that these three species are subterranean. [source] Arthroscopic reattachment of osteochondritis dissecans lesions using resorbable polydioxanone pinsEQUINE VETERINARY JOURNAL, Issue 5 2004A. J. NIXON Summary Reasons for performing study: Debridement of osteochondritis dissecans (OCD) cartilage lesions results in fibrocartilage and imperfect hyaline repair tissue, and forms a permanent irregularity to the subchondral bone plate. Objective: To evaluate the clinical, radiographic and outcome effects of OCD cartilage flap reattachment for select lesions as an alternative to OCD debridement. Hypothesis: Separated cartilage flaps resulting from OCD lesions may be re-incorporated into the hyaline cartilage surface by reattachment rather than debridement and removal. Methods: Resorbable polydioxanone pins were used to reattach OCD flap lesions in 16 joints of 12 horses. Criteria for attachment, rather than removal, included an unmineralised cartilage flap on preoperative radiographs and a relatively smooth surface with some residual perimeter attachment at surgery. Results: There were 12 subjects, 6 males and 6 females, 7 Thoroughbred or Standardbred weanlings, 3 Warmbloods, 1 Arabian and 1 Quarter Horse, mean age at surgery 6.8 months. All horses had effusion of the affected femoropatellar joint (n = 9), tarsocrural joint (n = 1) or fetlock (n = 2). Radiographic lesions varied in length between 1.8,6.3 cm; reattachment was used in 16 of 18 affected joints and the OCD cartilage was not satisfactory for salvage in 2 stifles. Number of pins required was 2,10. One horse was subjected to euthanasia due to a tendon laceration 8 weeks after surgery; of the remaining 11 horses, mean duration of follow-up was 3.9 years (range 4 months-8 years). Nine of these were sound and had entered work, while 2 were sound but remained unbroken 4 and 6 months post operatively, respectively. Radiographic resolution of the OCD lesion occurred in 14 of 16 pinned joints in the 9 horses with long-term follow-up. The 2 remaining joints had a 3 and a 5 mm mineralised flap in the original defect sites. Conclusions: This study indicated cartilage flap reattachment was an alternative to removal in selected OCD lesions. Potential relevance: Relatively smooth OCD cartilage flaps may be salvaged by reattachment and can result in normal radiographic subchondral contour and a high likelihood of athletic performance. Further case numbers are required to determine which lesions are too irregular or contain too much mineral for effective incorporation after reattachment. [source] Interfacial Microstructure of Chromium Oxide Coatings,ADVANCED ENGINEERING MATERIALS, Issue 7 2007X. Pang This paper presents a study of chromium oxide coatings' interfacial microstructure and structural properties affecting coating performance. Amorphous chromium and chromium oxide layers about 100 nm thick were detected at the Cr/steel and the Cr/coating interfaces, providing a solution for depositing thicker mechanically stable coatings with improved hardness, smaller grain size, and smooth surface. [source] Corrosion fatigue behaviour of a 15Cr-6Ni precipitation-hardening stainless steel in different tempersFATIGUE & FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, Issue 6 2000C.-K. Lin Systematic fatigue experiments, including both high-cycle axial fatigue (S,N curves) and fatigue crack growth (FCG, da/dN,,K curves), were performed on a precipitation-hardening martensitic stainless steel in laboratory air and 3.5 wt% NaCl solution. Specimens were prepared in three tempers, i.e. solution-annealed (SA), peak-aged (H900) and overaged (H1150) conditions, to characterize the effects of ageing treatment on the corrosion fatigue (CF) resistance. S,N results indicated that fatigue resistance in all three tempers was dramatically reduced by the aqueous sodium chloride environment. In addition, the smooth-surface specimens in H900 temper exhibited longer CF lives than the H1150 ones, while those in SA condition stood in between. However, for precracked specimens, the H1150 temper provided superior corrosive FCG resistance than the other two tempers. Comparison of the S,N and FCG curves indicated that early growth of crack-like defects and short cracks played the major role in determining the CF life for smooth surface. The differences in the CF strengths for the S,N specimens of the given three tempers were primarily due to their inherent differences in resistance to small crack growth, as they were in the air environment. [source] A Controllable Self-Assembly Method for Large-Scale Synthesis of Graphene Sponges and Free-Standing Graphene FilmsADVANCED FUNCTIONAL MATERIALS, Issue 12 2010Fei Liu Abstract A simple method to prepare large-scale graphene sponges and free-standing graphene films using a speed vacuum concentrator is presented. During the centrifugal evaporation process, the graphene oxide (GO) sheets in the aqueous suspension are assembled to generate network-linked GO sponges or a series of multilayer GO films, depending on the temperature of a centrifugal vacuum chamber. While sponge-like bulk GO materials (GO sponges) are produced at 40,°C, uniform free-standing GO films of size up to 9,cm2 are generated at 80,°C. The thickness of GO films can be controlled from 200,nm to 1,µm based on the concentration of the GO colloidal suspension and evaporation temperature. The synthesized GO films exhibit excellent transparency, typical fluorescent emission signal, and high flexibility with a smooth surface and condensed density. Reduced GO sponges and films with less than 5,wt% oxygen are produced through a thermal annealing process at 800,°C with H2/Ar flow. The structural flexibility of the reduced GO sponges, which have a highly porous, interconnected, 3D network, as well as excellent electrochemical properties of the reduced GO film with respect to electrode kinetics for the [Fe(CN)6]3,/4, redox system, are demonstrated. [source] Stimuli-Responsive Thin Coatings Using Elastin-Like Polymers for Biomedical ApplicationsADVANCED FUNCTIONAL MATERIALS, Issue 20 2009Rui R. Costa Abstract Smart thin coatings using a recombinant elastin-like polymer (ELP) containing the cell attachment sequence arginine,glycine,(aspartic acid) (RGD) are fabricated for the first time through simple deposition of the ELP dissolved in aqueous-based solutions. The biopolymer is produced and characterized using electrophoresis and mass spectroscopy. The temperature and pH responsiveness are assessed by aggregate size measurements and differential scanning calorimetry. The deposition of the studied ELP onto chitosan is followed in situ with a quartz-crystal microbalance with dissipation monitoring (QCM-D). Contact angle measurements are performed at room temperature and at 50,°C, showing reversible changes from a moderate hydrophobic behavior to an extremely wettable surface. AFM analysis performed at room temperature reveals a smooth surface and no organized structure. At 50,°C, the surface presents spherical nanometer-sized structures of collapsed biopolymer chains. Such results suggest that the ELP chains, when collapsed, aggregate into micelle-like structures at the surface of the substrate, increasing its water affinity. Cell adhesion tests on the developed coatings are conducted using a SaOS-2 cell line. Enhanced cell adhesion could be observed in the H-RGD6-coated surfaces, as compared with the original chitosan monolayer. An intermediate behavior is found in chitosan coated with the corresponding ELP without the RGD sequence. Therefore, the developed films have great potential as biomimetic coatings of biomaterials for different biomedical applications, including tissue engineering and controlled delivery of bioactive agents. Their thermo-responsive behavior can also be exploited for tunable cell adhesion and controlled protein adsorption. [source] The recognition and description of knapped lithic artifacts in thin sectionGEOARCHAEOLOGY: AN INTERNATIONAL JOURNAL, Issue 2 2010Diego E. Angelucci Stone tools occur quite frequently in sediment and soil thin sections, yet their micromorphological characteristics have not been explicitly defined in the literature. The aim of this paper is to define the criteria for the identification and description of knapped lithic artifacts composed of flint and quartzite by examining and comparing thin sections from prehistoric sites and petrographic thin sections obtained from lithic artifacts. The main characteristics that allow the micromorphologist to identify a knapped lithic artifact, besides its composition, grain size, and alteration degree, are: the tabular or platy shape; the angularity; the smooth surface; the prominent and regular boundary. Some examples taken from prehistoric sites in southern Europe show the reliability of these criteria for the recognition of stone tools in thin sections. © 2010 Wiley Periodicals, Inc. [source] Generation of Monodisperse Inorganic,Organic Janus Microspheres in a Microfluidic DeviceADVANCED FUNCTIONAL MATERIALS, Issue 10 2009Naveen Prasad Abstract This study presents a simple synthetic approach for the in situ preparation of monodisperse hybrid Janus microspheres (HJM) having organic and inorganic parts in a PDMS-based microfluidic device. Based on the mechanism of shear-force-driven break-off, merged droplets of two photocurable oligomer solutions having distinctive properties are generated into an immiscible continuous phase. Functionalized perfluoropolyether (PFPE) as the organic phase and hydrolytic allylhydridopolycarbosilane (AHPCS) as the inorganic phase are used for the generation in aqueous medium of HJM with well-defined morphology and high monodispersity (average diameter of 162,µm and a 3.5% coefficient of variation). The size and shape of the HJM is controlled by varying the flow rate of the disperse and continuous phases. The HJM have two distinctive regions: a hydrophobic hemisphere (PFPE) having a smooth surface and a relatively hydrophilic region (AHPCS) with a rough, porous surface. In addition, pyrolysis and subsequent oxidation of these HJM convert them into SiC-based ceramic hemispheres through the removal of the organic portion and etching off the silica shell. The selective incorporation of magnetic nanoparticles into the inorganic part shows the feasibility of the forced assembly of HJM in an applied magnetic field. [source] A Versatile, Molecular Engineering Approach to Simultaneously Enhanced, Multifunctional Carbon-Nanotube, Polymer Composites,ADVANCED FUNCTIONAL MATERIALS, Issue 1 2006J. Chen Abstract Single-walled carbon nanotubes (SWNTs) are recognized as the ultimate carbon fibers for high-performance, multifunctional composites. The remarkable multifunctional properties of pristine SWNTs have proven, however, difficult to harness simultaneously in polymer composites, a problem that arises largely because of the smooth surface of the carbon nanotubes (i.e., sidewalls), which is incompatible with most solvents and polymers, and leads to a poor dispersion of SWNTs in polymer matrices, and weak SWNT,polymer adhesion. Although covalently functionalized carbon nanotubes are excellent reinforcements for mechanically strong composites, they are usually less attractive fillers for multifunctional composites, because the covalent functionalization of nanotube sidewalls can considerably alter, or even destroy, the nanotubes' desirable intrinsic properties. We report for the first time that the molecular engineering of the interface between non-covalently functionalized SWNTs and the surrounding polymer matrix is crucial for achieving the dramatic and simultaneous enhancement in mechanical and electrical properties of SWNT,polymer composites. We demonstrate that the molecularly designed interface of SWNT,matrix polymer leads to multifunctional SWNT,polymer composite films stronger than pure aluminum, but with only half the density of aluminum, while concurrently providing electroconductivity and room-temperature solution processability. [source] Potential of low cost close-range photogrammetry system in soil microtopography quantificationHYDROLOGICAL PROCESSES, Issue 10 2009Mohamed A. M. Abd Elbasit Abstract Soil microtopography is a dynamic soil property which affects most soil-surface and water interaction processes. The importance of soil microtopography has been recognized for a long time, but only limited reports are available in the literature. In this study, the potential of using consumer-grade cameras and close-range photogrammetry procedures to quantify soil microtopography at plot-scale level (,1 m2) were assessed. Five fabricated gypsum surfaces with different degrees of roughness were used to simulate the soil surface conditions with different soil aggregates. The surfaces' digital elevation model (DEM) was generated using the photogrammetry system (PHM) involving a consumer-grade camera, and pin-microrelief meter (PM). The DEM generated using the PHM was assessed for accuracy, roughness indices (RI), depression area percentage (DA%), depression storage capacity (DSC), and micro-rills delineation in comparison with the PM. The accuracy was evaluated using the root mean square error (RMSE) in the x-, y-, and z-directions. Visual comparison between the 3D-visions of the DEM showed strong agreement between the DEM generated by the PHM and the PM, and between the PHM and the 2D images for the different gypsum surfaces. The average RMSE in the x-. y-, and z-direction were 2·08, 1·52, and 0·82 mm for the rough surface, and 4·42, 1·65, and 3·22 mm for the smooth surface. The RIs calculated from the two methods were highly correlated. The small discrepancy between the two methods was discussed. The micro-rills delineation was also similar for the two methods regarding the network density. The grid size did not effect the RI calculation, and has a strong influence on the DA%, DSC, and the delineated micro-rills orders. Results suggest that a consumer-grade camera and close-range photogrammetry have the potential to quantify the soil microtopography. Copyright © 2009 John Wiley & Sons, Ltd. [source] Experimental investigation of slip-stick behaviour in granular materialsINTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, Issue 14 2006Khalid A. Alshibli Abstract This paper presents the results of an experimental programme to study load oscillation in granular materials. Spherical glass beads were used in the investigation. Cylindrical specimens were compressed under axisymmetric triaxial loading condition at 25,100,250 and 400 kPa confining pressures. The test parameters included: (i) particle size; (ii) gradation (uniform versus non-uniform specimens); (iii) confining pressure; (iv) loading rate; and (v) specimen density. In general, a slight post-peak principal stress softening was observed as well as a continuous volume increase (dilation) even at relatively high strains. This appears to be caused by the uniform shape and smooth surface of the spherical particles. Load oscillations were observed in the very small, small, and well-graded beads at each confining pressure. For the medium beads, the oscillations appeared at high confining pressure (250 and 400 kPa), and they did not appear in the large beads. The influences of the confining pressure, loading rate, particle size, gradation and specimen density on load oscillation are presented and discussed. Copyright © 2006 John Wiley & Sons, Ltd. [source] A simplified quasi-two-dimensional model for gain optimization in carbon dioxide gasdynamic lasers (GDL)INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, Issue 11 2002A. R. Bahrampour Abstract In this paper a simplified quasi-two-dimensional model for small signal gain optimization in gasdynamic laser is introduced. In order to obtain a homogeneous medium with maximum optical gain in the active medium, by nozzle shape formation, the shock occurrence position is controlled and is postponed to some point behind the laser active medium. Then the method of calculus of variation is used to find the supersonic part of the nozzle of a gasdynamic laser with maximum gain in the active medium. The interesting result is that the supersonic part of such a nozzle consists of a wedge as the accelerating part of the nozzle, a smooth surface for the uniformization, and finally a channel for the relaxation of the medium. (The middle section is characterized as the geometrical locus of points whose characteristic curves are concurrent at a certain point.) It is also shown that, overlooking a minor difference in the gain, the nozzle can be chosen to be a shock free one with the ultimate optical uniformity. Copyright © 2002 John Wiley & Sons, Ltd. [source] Cutaneous sarcoid-like granulomas with alveolar hemorrhage and c-ANCA PR-3INTERNATIONAL JOURNAL OF DERMATOLOGY, Issue 9 2004Natividade Rocha MD A 28-year-old woman, employed as a leather factory worker, noted asymptomatic, well-delimited plaques on both knees, 6 years ago. The plaques were violaceous with a smooth surface. One appeared over a post-traumatic scar from childhood (Fig. 1). Two years later, she began to complain of symptoms suggestive of polyarthritis, first of the small joints of the hands (proximal interphalanges) and then of the larger joints (wrists, elbows, and knees). She was diagnosed with rheumatoid arthritis and began treatment with nonsteroidal anti-inflammatory drugs for 1 month without any change. Deflazacort, 12 mg/day, and hydroxychloroquine, 400 mg/day, were administered for 3 months, with improvement of her articular complaints, but not her skin lesions. Figure 1. Well-delimited, violaceous plaques with a smooth surface on the knees, one over an old post-traumatic scar One year later, she complained of dysphonia, which remitted spontaneously after some weeks. After one additional year, she noted papules, with similar characteristics to the plaques, on the elbows, and two well-delimited orange-to-brown plaques on the forehead (Fig. 2). Figure 2. Orange,brown plaques symmetrically placed on the forehead During the fifth year of the disease, she was referred for the first time to a dermatologist, who biopsied one of the knee lesions. The histologic result was compatible with "sarcoid granuloma." At that time, she presented with skin lesions as her only complaint. Sarcoidosis was suspected based on a chest X-ray, which revealed hilar lymphadenopathy and diffuse accentuation of the interstitium. In November 2000, she suddenly developed fever (40 °C), cough with hemoptysis, dysphonia, and subcutaneous nodules on the palmar surface of the fingers of both hands that were painless, well-delimited, 5 mm in diameter, and firm (Fig. 3). She reported a weight loss of 12 kg in the previous 3 months. Pulmonary condensation was found on auscultation, and she had palpable hepatomegaly. Peripheral lymphadenopathy was not present. Figure 3. Painless, well-delimited, firm subcutaneous nodules on the palmar surface of the fingers Laboratory investigations revealed normochromic, normocytic anemia (hemoglobin, 7.7 g/dL), iron deficit, a white blood cell count of 16,000/µL with neutrophilia, an erythrocyte sedimentation rate of 130 mm/h, elevation of liver enzymes, a slight increase in angiotensin-converting enzyme (ACE) level (72 U/L), hypergammaglobulinemia (IgG, 3350 mg/dL), antinuclear antibody (ANA) of 1 : 320, and a slight increase in CD4 and decrease in CD8 lymphocytes with normal cellular morphology in blood. Renal function, urine sediment, urine and serum calcium, complement (C4), dsDNA, antimitochondrial antibody, direct and indirect Coombs test, antineutrophil cytoplasmic antibody (ANCA), tuberculin skin tests, viral markers of hepatitis B, C, and human immunodeficiency virus (HIV), electrocardiogram (ECG), ophthalmic examinations, and culture for infectious agents in blood and sputum were all normal or negative. Computed tomography (CT) scan showed an infiltrate in the upper right pulmonary lobule with a central cavity and bilateral hilar lymphadenopathy (Fig. 4). Homogeneous hepatosplenomegaly was present. The bronchoalveolar lavage (BAL) showed a slight lymphocytic increase predominantly of CD8 cells and hemosiderosis. Stains for infectious agents, including acid-fast bacillus, fungi, Mycoplasma, and Legionella, were negative. Three biopsies from the forehead, elbows, and knees showed well-formed noncaseating epithelioid cell granulomas with giant cells of the Langhans type in the dermis, suggestive of sarcoidosis (Figs 5 and 6). A fourth biopsy from a finger nodule demonstrated inflammatory infiltration of the dermis and necrosis with cellular debris. Vasculitis was not seen (Fig. 7). Figure 4. Computed tomography scan showing an infiltrate in the upper right pulmonary lobule with a central cavity Figure 5. Beneath a flattened epidermis, several sarcoid granulomas composed of epithelioid histiocytes and several multinucleated giant cells of Langhans type can be seen (hematoxylin and eosin, ×10) Figure 6. Less well-formed sarcoid granulomas in a hyperkeratotic area, surrounded by a sparse rim of lymphocytes (hematoxylin and eosin, ×20) Figure 7. Foci of necrosis and fibrinoid degeneration with some neutrophil infiltration and nuclear dusting (hematoxylin and eosin, ×40) The patient was treated with a broad-spectrum empirical antimicrobial (levofloxacin, 500 mg daily intravenously) over 12 days, with prompt improvement in her symptoms and remission of the forehead and finger lesions. Nevertheless, on the first evaluation after hospitalization, the CT scan showed persistence of the pulmonary cavity (Fig. 8). A repeat ANCA determination was positive (cytoplasmic pattern, c-ANCA) at 1 : 640 by indirect immunofluorescence (IIF). Antiproteinase-3 antibody was demonstrated at 78 by enzyme-linked immunosorbent assay (ELISA). Figure 8. Computed tomography scan showing persistence of the pulmonary cavity She underwent an open lung biopsy which revealed intra-alveolar hemorrhage and scanty noncaseating epithelioid cell granulomas of the sarcoidosis type in the peripheral blood vessels without vasculitis. A diagnosis of Wegener's granulomatosis was made and she began prednisolone (1 mg/kg/day) and oral cyclophosphamide (2 mg/kg/day). One year later, she is asymptomatic, the skin lesions have completely remitted, c-ANCA is negative, and the CT scan shows partial regression of the pulmonary cavity. [source] Tufa Deposition in Karst Streams Can Enhance the Food Supply of the Grazing Caddisfly Melampophylax mucoreus (Limnephilidae)INTERNATIONAL REVIEW OF HYDROBIOLOGY, Issue 3 2006Christian Kock Abstract We studied the effect of carbonate depositions covering stone surfaces on the growth of larvae and the biomass of subsequent adults of the grazing limnephilid caddisfly Melampophylax mucoreus(Hagen, 1861) in a laboratory rearing experiment. M. mucoreus is mainly distributed in karst streams characterized by calcium carbonate precipitations (tufa). We reared larvae of M. mucoreus on stones covered by calcareous tufa crusts as well as on stones from which these crusts were experimentally removed to assess the influence on larval growth and the subsequent adult biomass. The rough surface of the covered stones provided a higher complexity of micro-habitats and supported algal growth compared to the smooth surface of stones without crusts. Larvae of M. mucoreus profited from the enhanced algal biofilm growth on the calcium carbonate precipitation indicated by faster larval growth and higher subsequent adult biomass. Biomass increase of larvae reared on stones covered by tufa crusts exhibited a faster biomass development (0.09 ± 0.015 mg/d) compared to the larvae reared on stones without crusts (0.06 ± 0.002 mg/d). Adult males (5.13 ± 0.25 mg) and females (7.64 ± 0.63 mg) were significantly heavier in the treatment with stones covered by tufa than their conspecifics from the treatment with uncovered stones (males: 4.26 ± 0.25 mg, p = 0.047; females: 4.96 ± 0.47 mg, p = 0.001). Additionally, males from the treatment with crust covered stones emerged significantly earlier (p = 0.003) than the males from the other treatment, whereas no significant difference was found for females. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Enhancement of crystalline perfection by organic dopants in ZTS, ADP and KHP crystals as investigated by high-resolution XRD and SEMJOURNAL OF APPLIED CRYSTALLOGRAPHY, Issue 6 2006S. Parthiban To reveal the influence of complexing agents on crystalline perfection, tristhiourea zinc(II) sulfate (ZTS), ammonium dihydrogen phosphate (ADP) and potassium hydrogen phthalate (KHP) crystals grown by slow-evaporation solution growth technique using low concentrations (5 × 10,3M) of dopants like ethylenediamminetetraacetic acid (EDTA) and 1,10-phenanthroline (phen) were characterized by high-resolution X-ray diffractometry (XRD) and scanning electron microscopy (SEM). High-resolution diffraction curves (DCs) recorded for ZTS and ADP crystals doped with EDTA show that the specimen contains an epilayer, as observed by the additional peak in the DC, whereas undoped specimens do not have such additional peaks. On etching the surface layer, the additional peak due to the epilayer disappears and a very sharp DC is obtained, with full width at half-maximum (FWHM) of less than 10,arcsec, as expected from the plane wave dynamical theory of X-ray diffraction for an ideally perfect crystal. SEM micrographs also confirm the existence of an epilayer in doped specimens. The ZTS specimen has a layer with a rough surface morphology, having randomly oriented needles, whereas the ADP specimen contains a layer with dendric structure. In contrast to ADP and ZTS crystals, the DC of phen-doped KHP shows no additional peak, but it is quite broad (FWHM = 28,arcsec) with a high value of integrated intensity, , (area under the DC). The broadness of the DC and the high value of , indicate the formation of a mosaic layer on the surface of the crystal. However, similar to ADP and ZTS, the DC recorded after etching the surface layer of the KHP specimen shows a very sharp peak with an FWHM of 8 arcsec. An SEM photograph of phen-doped KHP shows deep cracks on the surface, confirming the mosaicity. After removing the surface layer, the SEM pictures reveal a smooth surface. A similar trend is observed with other complexing agents, like oxalic acid, bipy and picolinic acid. However, only typical examples are described in the present article where the effects were observed prominently. The investigations on ZTS, ADP and KHP crystals, employing high-resolution XRD and SEM studies, revealed that some organic dopants added to the solution during the growth lead to the formation of a surface layer, due to complexation of these dopants with the trace metal ion impurities present in the solution, which prevents the entry of impurities, including the solvent, into the crystal, thereby assisting crystal growth with high crystalline perfection. The influence of organic dopants on the second harmonic generation efficiency is also investigated. [source] Polarization switching in BaTiO3 thin films measured by X-ray diffraction exploiting anomalous dispersionJOURNAL OF APPLIED CRYSTALLOGRAPHY, Issue 2 2004S. J. Van Reeuwijk Films of BaTiO3 ranging from 20,nm to 300,nm in thickness were grown with pulsed laser deposition on Nb:SrTiO3. The quality of the layers was investigated using atomic force microscopy, X-ray reflectivity and X-ray diffraction. Both the micrographs and the X-ray reflectivity spectra indicate a smooth surface of the layers. The X-ray diffraction profiles measured using synchrotron radiation show features characteristic for highly crystalline thin films. The application of an external electric field parallel to the c axis changes an hkl reflection of BaTiO3 to an hk reflection. Due to the anomalous dispersion, the intensities of these two reflections are not equal and the atomic displacements can be determined from the intensity differences. The electric field-induced intensity changes can be as large as a few percent, which makes data collection from a 100,nm film using Cu K, radiation from an X-ray tube feasible. The ,I/I values of a number of reflections from the 20 and 50,nm films were measured using synchrotron radiation. The observed ,I/I values were in good agreement with the intensity changes expected for polarization switching in the bulk. [source] Controlled size chitosan nanoparticles as an efficient, biocompatible oligonucleotides delivery systemJOURNAL OF APPLIED POLYMER SCIENCE, Issue 4 2010Romila Manchanda Abstract Polymeric nanoparticles of chitosan crosslinked with glutaraldehyde have been prepared using reverse micellar system. An optically clear solution was obtained on redispersing these nanoparticles in aqueous buffer. The nanoparticles were characterized for their size and surface morphology employing dynamic laser scattering (DLS) and transmission electron microscopy (TEM). The TEM images showed spherical particles with smooth surface and narrow size distribution of about 90 nm, which was also supported by DLS data. Size and morphology of the particles remains the same on redispersing the lyophilized powder of these nanoparticles in aqueous buffer. Further, these nanoparticles were loaded with different synthetic oligonucleotides (ODNs). In vitro pH dependent release of the adsorbed oligonucleotides from these nanoparticles was also studied. At basic pH the release of oligonucleotides was found higher as compared with neutral and acidic medium. Cytotoxicity studies done on HEK 293 cells reveals that oligonucleotide loaded nanoparticles have high cell viability of nearly 76,88% whereas those of lipofectamine was about 35%. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Anti-thrombogenicity of styrene-butadiene-styrene triblock copolymer grafted with poly(ethylene glycol)sJOURNAL OF APPLIED POLYMER SCIENCE, Issue 4 2009Masanobu Nagura Abstract We transformed hydrophobic/hydrophobic styrene/butadiene/styrene tri-block copolymer (SBS) to hydrophobic / hydrophilic microphase-separated surfaces by grafting with hydrophilic poly(ethylene glycol) (PEG) on poly(butadiene) (PB) domain via hydrocarboxylation and hydrobromination and investigated the anti-thrombogenicity of these surfaces. In the case of SBS cast film from toluene solution, PEG was densely grafted because of the development of an unevenness on the order of several 10 nm on the surface, which had a huge surface area in comparison with poly(butadiene) rubber with its uniformly smooth surface. Grafted PEG (molecular weight = 600) was found to clearly inhibit adhesion and activation of platelets and coagulation of the whole blood component, which is indicative of anti-thrombogenicity. These properties correspond to a surface coated by a copolymer of 2-methacryloyl-oxyethyl phosphorylcholine and n -butyl methacrylate, which is well known to be the best excellent anti-thrombogenic material in the world. Melt-molded SBS film, which also has an uneveness on the order of several 10 nm, showed similar excellent anti-thrombogenicity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009 [source] Glutaraldehyde-crosslinked chitosan beads for controlled release of diclofenac sodiumJOURNAL OF APPLIED POLYMER SCIENCE, Issue 1 2007V. H. Kulkarni Abstract An inexpensive and simple method was adopted for the preparation of chitosan beads, crosslinked with glutaraldehyde (GA), for the controlled release of diclofenac sodium (DS). The beads were prepared by varying the experimental conditions such as pH, temperature, and extent of crosslinking. The absence of any chemical interaction among drug, polymer, and the crosslinking agent was confirmed by FTIR and thermal analysis. The beads were characterized by microscopy, which indicated that the particles were in the size range of 500,700 ,m and SEM studies revealed smooth surface and spherical shape of beads. The beads produced at higher temperature and extended exposure to GA exhibited lower drug content, whereas increased drug loading resulted in enhanced drug release. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 211,217, 2007 [source] Some soft tissue characteristics at implant abutments with different surface topographyJOURNAL OF CLINICAL PERIODONTOLOGY, Issue 1 2003A study in humans Abstract Background: If an implant with a rough surface is exposed to the oral cavity, it may accumulate greater amounts of plaque than a smooth surface, which may lead to severe problems with mucositis and peri-implantitis. The purpose of the present paper was to investigate the early inflammatory response to mucosa-penetrating abutments prepared with varying surface roughness. Methods: Nine patients had all five of their original abutments exchanged to test abutments for a 4-week period. The test abutments were prepared with five different roughnesses. The surface roughness was measured with an optical profilometer. At the end of the test period, clinical evaluation was performed; the health of the surrounding mucosa, the amount of accumulated plaque and marginal bleeding were registered. One biopsy was taken from each test abutment. Qualitative and quantitative histological evaluations were performed. Results: There was a statistically significant difference between patients regarding the amount of accumulated plaque on the abutment surfaces and inflammatory cells, but no difference between the surface modifications in relation to plaque accumulation or number of inflammatory cells. Conclusion: No relation was found between inflammatory response and abutment surface roughness after an evaluation time of 4 weeks in a human test model. Zusammenfassung Hintergrund: Wenn ein Implantat mit einer rauhen Oberfläche der Mundhöhle ausgesetzt wird, kann es zu stärkerer Plaqueakkumulation kommen als bei glatten Oberflächen, was zu ernsthaften Problemen mit Mukositis und Periimplantitis führen kann. Zielsetzung: Untersuchung der frühen Entzündungsreaktion auf durch die Schleimhaut tretende Implantatpfeiler mit unterschiedlicher Oberflächenrauhigkeit. Methoden: Bei jedem von 9 Patienten wurden alle 5 ursprünglichen Implantatpfeiler für einen Zeitraum von 4 Wochen gegen Testpfeiler ausgetauscht. Die Testpfeiler waren jeweils mit unterschiedlichen Oberflächenrauhigkeiten präpariert. Die Rauhigkeiten waren mit einem Profilometer gemessen worden. Am Ende des Untersuchungszeitraumes wurden klinische Parameter bestimmt: der Zustand der periimplantären Mukosa, die Menge der akkumulierten Plaque und marginales Bluten. An jedem Pfeiler wurde eine Biopsie entnommen, die jeweils qualitativ und quantitativ histologisch ausgewertet wurde. Ergebnisse: Es bestanden statistisch signifikante interindividuelle Unterschiede zwischen den Patienten hinsichtlich abgelagerter Plaque und Zahl der Entzündungszellen an den Implantatpfeilern, aber keine diesbezüglichen intraindividuellen Unterschiede zwischen den verschiedenen Oberflächenrauhigkeiten. Schlussfolgerung: In einem menschlichen Versuchsmodell wurden über einen Zeitraum von 4 Wochen keine Beziehungen zwischen Entzündungsreaktion und Implantatpfeileroberflächenrauhigkeit beobachtet. Résumé Origine: Lorsqu'un implant à surface rugueuse est exposé dans la cavité buccale, il peut accumuler davantage de plaque qu'une surface lisse, ce qui peut conduire à des problèmes graves associés à une mucite ou une péri-implantite. Le but de cette étude était d'examiner la réponse inflammatoire précoce aux implants pénétrant la muqueuse et ayant une rugosité de surface variable. Méthodes: Les cinq implants d'origine de chacun des neuf patients ont été remplacés par des implants expérimentaux pour une période de quatre semaines. Ces implants expérimentaux ont été conçus avec cinq rugosités différentes. La rugosité de surface a été mesurée à l'aide d'un profilomètre optique. A l'issue de la période expérimentale, une évaluation clinique a été réalisée: l'état de la muqueuse environnante, la quantité de plaque accumulée et le saignement marginal ont été relevés. Une biopsie a été prélevée sur chaque implant expérimental et des évaluations histologiques qualitatives et quantitatives ont été faites. Résultats: Il y avait une différence statistiquement significative entre les patients en ce qui concerne la quantité de plaque accumulée à la surface des implants et les cellules inflammatoires, mais aucune différence entre les modifications de surface en rapport avec l'accumulation de plaque ou le nombre de cellules inflammatoires. Conclusion: Aucune relation n'a étéétablie entre la réponse inflammatoire et la rugosité de surface des implants au bout de quatre semaines d'évaluation dans un modèle expérimental humain. Mots clés: Pilier d'implant; réponse des tissus mous; étude clinique; histologie. [source] Preparation and characterization of quercetin-loaded polymethyl methacrylate microcapsules using a polyol-in-oil-in-polyol emulsion solvent evaporation methodJOURNAL OF PHARMACY AND PHARMACOLOGY: AN INTERNATI ONAL JOURNAL OF PHARMACEUTICAL SCIENCE, Issue 12 2007Dong-Hwan Lee Flavonoids and related compounds exhibit a wide range of useful pharmacological properties but present challenges related to their stability and solubility in commonly available solvents. In this study, polymethyl methacrylate (PMMA) microcapsules were prepared using a novel polyol-in-oil-in-polyol (P/O/P) emulsion solvent evaporation method as a means of stabilizing the flavonoids, using quercetin as a model flavonoid drug. The morphology of the microcapsules was evaluated using a scanning electron microscope, revealing a spherical shape with a smooth surface. The cross-section image of the PMMA microcapsules prepared with an amphiphilic polymer in the inner polyol phase showed that the microcapsule was filled with several submicron microspheres. The mean diameter varied from 1.03 ± 0.12 ,m to 2.39 ± 0.42 ,m, and the encapsulation efficiency ranged from 12.7% to 26.9%. When free quercetin was stored at 42°C, the residual quercetin content gradually decreased to 18% over 28 days as a result of oxidation. However, when encapsulated in PMMA microcapsules with an amphiphilic polymer in the inner polyol phase, the residual quercetin content decreased to just 82%. In-vitro release studies indicated a sustained release pattern throughout the 36-h study. The release kinetics of the microcapsules with an amphiphilic polymer followed a diffusion-controlled mechanism and the microcapsule without amphiphilic polymer followed an anomalous diffusion behaviour. This study suggests that the novel P/O/P emulsion solvent evaporation method can be applied to the encapsulation of flavonoids. [source] Solid lipid nanoparticles (SLN) as carriers for the topical delivery of econazole nitrate: in-vitro characterization, ex-vivo and in-vivo studiesJOURNAL OF PHARMACY AND PHARMACOLOGY: AN INTERNATI ONAL JOURNAL OF PHARMACEUTICAL SCIENCE, Issue 8 2007Vanna Sanna Solid lipid nanoparticles (SLN) designed for topical administration of econazole nitrate (ECN), were prepared by o/w high-shear homogenization method using different ratios of lipid and drug (5:1 and 10:1). SLN were characterized in terms of particle size, morphology, encapsulation efficiency and crystalline structure. After incorporation of SLN into hydrogels, rheological measurements were performed, and ex-vivo drug permeation tests were carried out using porcine stratum corneum (SC). In-vivo study of percutaneous absorption of ECN as a function of application time and composition of gels was carried out by tape-stripping technique. Penetration tests of the drug from a conventional gel were performed as comparison. High-shear homogenization method resulted in a good technique for preparation of ECN-loaded SLN. Particles had a mean diameter of about 150 nm and a regular shape and smooth surface. The encapsulation efficiency values were about 100%. Ex-vivo tests showed that SLN were able to control the drug release through the SC; the release rate depended upon the lipid content on the nanoparticles. In-vivo studies demonstrated that SLN promoted a rapid penetration of ECN through the SC after 1 h and improved the diffusion of the drug in the deeper skin layers after 3 h of application compared with the reference gel. [source] ROLE OF SURFACE WOUNDS AND BROWN ALGAL EPIPHYTES IN THE COLONIZATION OF ASCOPHYLLUM NODOSUM (PHAEOPHYCEAE) FRONDS BY VERTEBRATA LANOSA (RHODOPHYTA),JOURNAL OF PHYCOLOGY, Issue 3 2009Caroline M. Longtin Ascophyllum nodosum (L.) Le Jol. forms extensive beds in wave-sheltered, rocky intertidal habitats on the northwestern Atlantic coast. This fucoid seaweed is host to an obligate red algal epiphyte, Vertebrata lanosa (L.) T. A. Chr. [=Polysiphonia lanosa (L.) Tandy], and two facultative brown algal epiphytes, Elachista fucicola (Velley) Aresch. and Pylaiella littoralis (L.) Kjellm. Although V. lanosa can occur throughout most of the length of host fronds, it largely predominates in midfrond segments. The two brown algal epiphytes are restricted to distal segments. Through field experiments conducted in Nova Scotia, Canada, we tested the hypothesis that surface wounds are required for the colonization of distal segments of host fronds by V. lanosa. Distal tissues normally have a smooth surface because of their young age (A. nodosum fronds grow apically). By creating small wounds that mimicked grazing wounds distributed elsewhere on host fronds, we demonstrated that V. lanosa can colonize distal frond segments during the growth and reproductive season (summer and autumn). Approximately half of the artificial wounds were colonized by V. lanosa during this time. The experimental exclusion of both brown algal epiphytes from distal frond segments did not affect colonization by V. lanosa. Thus, we conclude that the absence of surface irregularities on distal segments of host fronds, specifically small wounds, is the main factor explaining the absence of V. lanosa there. We propose that further experimental work clarifying epiphyte distribution in host beds will enhance our ability to understand the functional role of epiphytes in intertidal ecosystems. [source] Preparation of a Monodispersed Suspension of Barium Titanate Nanoparticles and Electrophoretic Deposition of Thin FilmsJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 8 2004Juan Li A transparent and stable monodispersed suspension of nanocrystalline barium titanate was prepared by dispersing a piece of BaTiO3 gel into a mixed solvent of 2-methoxyethanol and acethylacetone. The results of high-resolution transmission electron microscopy (HR-TEM) and size analyzer confirmed that the BaTiO3 nanoparticles in the suspension had an average size of ,10 nm with a narrow size distribution. Crystal structure characterization via TEM and X-ray diffraction indicated BaTiO3 nanocrystallites to be a perovskite cubic phase. BaTiO3 thin films of controlled thickness from 100 nm to several micrometers were electrophoretic deposited compactly on Pt/Ti/SiO2/Si substrates. The deposited thin film had uniform nanostructure with a very smooth surface. [source] | ||||||||||||||||||||||||||||||||||||||||||||||