Shape-memory Alloy (shape-memory + alloy)

Distribution by Scientific Domains


Selected Abstracts


Cast NiTi Shape-Memory Alloys,

ADVANCED ENGINEERING MATERIALS, Issue 6 2005
M. Ortega
The purpose of this study is to build a fundamental understanding of the relationship between the structure and properties of cast nickel-titanium (NiTi). The structure of the cast material will be analyzed at various scales and will be related to the properties of the cast material such as transformation temperatures, stress-strain behavior, and recovery properties. This study demonstrates that cast NiTi can possess excellent shape-memory properties. [source]


Magnetic Field-Induced Phase Transformation in NiMnCoIn Magnetic Shape-Memory Alloys,A New Actuation Mechanism with Large Work Output

ADVANCED FUNCTIONAL MATERIALS, Issue 7 2009
Haluk E. Karaca
Abstract Magnetic shape memory alloys (MSMAs) have recently been developed into a new class of functional materials that are capable of magnetic-field-induced actuation, mechanical sensing, magnetic refrigeration, and energy harvesting. In the present work, the magnetic &!hyphen;field-induced martensitic phase transformation (FIPT) in Ni45Mn36.5Co5In13.5 MSMA single crystals is characterized as a new actuation mechanism with potential to result in ultra-high actuation work outputs. The effects of the applied magnetic field on the transformation temperatures, magnetization, and superelastic response are investigated. The magnetic work output of NiMnCoIn alloys is determined to be more than 1,MJ m,3 per Tesla, which is one order of magnitude higher than that of the most well-known MSMAs, i.e., NiMnGa alloys. In addition, the work output of NiMnCoIn alloys is orientation independent, potentially surpassing the need for single crystals, and not limited by a saturation magnetic field, as opposed to NiMnGa MSMAs. Experimental and theoretical transformation strains and magnetostress levels are determined as a function of crystal orientation. It is found that [111]-oriented crystals can demonstrate a magnetostress level of 140,MPa T,1 with 1.2% axial strain under compression. These field-induced stress and strain levels are significantly higher than those from existing piezoelectric and magnetostrictive actuators. A thermodynamical framework is introduced to comprehend the magnetic energy contributions during FIPT. The present work reveals that the magnetic FIPT mechanism is promising for magnetic actuation applications and provides new opportunities for applications requiring high actuation work-outputs with relatively large actuation frequencies. One potential issue is the requirement for relatively high critical magnetic fields and field intervals (1.5,3,T) for the onset of FIPT and for reversible FIPT, respectively. [source]


Porous TiNi Biomaterial by Self-Propagating High-Temperature Synthesis,

ADVANCED ENGINEERING MATERIALS, Issue 6 2004
J.S. Kim
Abstract Porous TiNi shape-memory alloy (TiNi SMA) bodies with controlled pore structure were produced from the (Ti+Ni) powder mixture by self-propagating high-temperature synthesis (SHS) method. The effect of processing variables such as the kind of starting powders, ignition temperature and preheating schedule on the behavior of combustion wave propagation, the formation of phases and pore structure was investigated. The relationship between pore structure and mechanical properties was also investigated. An in vivo test was performed to evaluate bone tissue response and histocompatibility of porous TiNi SMA using 15 New Zealand white rabbits. No apparent adverse reactions such as inflammation and foreign body reaction were noted on or around all implanted porous TiNi SMA blocks. Bone ingrowth was found in the pore space of all implanted blocks. [source]


Embedded Shape-Memory Alloy Wires for Improved Performance of Self-Healing Polymers,

ADVANCED FUNCTIONAL MATERIALS, Issue 15 2008
Eva L. Kirkby
Abstract We report the first measurements of self-healing polymers with embedded shape-memory alloy (SMA) wires. The addition of SMA wires shows improvements of healed peak fracture loads by up to a factor of 1.6, approaching the performance of the virgin material. Moreover, the repairs can be achieved with reduced amounts of healing agent. The improvements in performance are due to two main effects: (i) crack closure, which reduces the total crack volume and increases the crack fill factor for a given amount of healing agent and (ii) heating of the healing agent during polymerization, which increases the degree of cure of the polymerized healing agent. [source]


Evaluation of ferromagnetic shape-memory alloys by the extended Hückel method

IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, Issue 3 2007
Kei Ehara Student Member
Abstract Ferromagnetic shape-memory alloy (SMA) are powerful candidates as actuators, pressure sensors, magnetic sensors, etc. Magnetic-field-induced strain has been observed in many ferromagnetic SMA. The magnetic-field-induced strain is a reversible transformation in the martensite phase with the magnetic field. We have investigated the property of the ferromagnetic shape-memory materials by the extended Hückel method, and estimated the ferromagnetic shape-memory of Fe,Pt and Fe,Pd alloys at high temperatures. We used two physical quantities, i.e. cohesive energy and energy fluctuation, to measure the stability of the materials. On the basis of the cohesive energy and energy fluctuation, we discuss the characteristics of ferromagnetic SMA, in which the energy fluctuation is a measure of thermal stability of the metals and/or alloys. The martensite structure is unstable, which means that the energy fluctuation has to be controlled to a small value to keep the martensite phase. Furthermore, it is estimated that the energy fluctuation is associated with the Curie temperature. The Curie temperature is an essential parameter for ferromagnetic materials. From the discussion presented above, we can propose the following: (i) Alloys possessing a low cohesive energy are associated with a high mobility of atoms and are suitable for ferromagnetic shape-memory materials; (ii) Alloys showing a low energy fluctuation show ferromagnetic shape-memory and are favored for use as memory devices. We found that I (iodine) is the best dopant for Fe,Pt ferromagnetic SMA, and Tc (technetium) is the best dopant for Fe,Pd ferromagnetic SMA. Copyright © 2007 Institute of Electrical Engineers of Japan© 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. [source]


Shape-Memory Stapes Prosthesis for Otosclerosis Surgery

THE LARYNGOSCOPE, Issue 8 2005
Glenn W. Knox MD
Abstract Objectives: The aim of this study was to determine the efficacy of a shape-memory alloy, Nitinol, as a component of an improved stapes prosthesis. Study Design: Prospective laboratory and clinical study to develop a Nitinol stapes prosthesis. Methods: Various diameters of Nitinol wire and temperature transition variants were analyzed with regard to ease of deformation, response to heating, and strength. The size and geometry of the closed hook was determined by measurement of 50 incus cadaver bones. Several heat sources for activating the shape memory were evaluated, including electrocautery, lasers, and warm water. Trial surgeries were then performed on human temporal bones in the laboratory. The closure characteristics of the Nitinol loop were studied. Magnetic resonance imaging (MRI) testing at 1.5 Tesla was performed to determine safety during MRI studies. Preliminary human subject trials were then instituted. Results: In all cases, a low heat condition was ample to activate the shape memory characteristics of the hook and return it to a closed position after it had been opened. Laser power was generally set well below the power needed for removing bone. The Nitinol loop closed snugly around the incus with application to the top of the hook with a low temperature laser setting. Almost any heat source was effective. MRI testing at 1.5 Tesla showed no movement of the prosthesis. Preliminary results in human subjects showed excellent air-bone closure. The Nitinol loop holds uniform contact around the incus. Conclusions: The Nitinol piston greatly simplifies the stapedectomy procedure by taking the need for a hand operated instrument out of the surgeon's hands. Because of the nature of the Nitinol wire, it can never over-crimp. All these characteristics make the prosthesis advantageous for otosclerosis surgery. [source]


Evaluation of ferromagnetic shape-memory alloys by the extended Hückel method

IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, Issue 3 2007
Kei Ehara Student Member
Abstract Ferromagnetic shape-memory alloy (SMA) are powerful candidates as actuators, pressure sensors, magnetic sensors, etc. Magnetic-field-induced strain has been observed in many ferromagnetic SMA. The magnetic-field-induced strain is a reversible transformation in the martensite phase with the magnetic field. We have investigated the property of the ferromagnetic shape-memory materials by the extended Hückel method, and estimated the ferromagnetic shape-memory of Fe,Pt and Fe,Pd alloys at high temperatures. We used two physical quantities, i.e. cohesive energy and energy fluctuation, to measure the stability of the materials. On the basis of the cohesive energy and energy fluctuation, we discuss the characteristics of ferromagnetic SMA, in which the energy fluctuation is a measure of thermal stability of the metals and/or alloys. The martensite structure is unstable, which means that the energy fluctuation has to be controlled to a small value to keep the martensite phase. Furthermore, it is estimated that the energy fluctuation is associated with the Curie temperature. The Curie temperature is an essential parameter for ferromagnetic materials. From the discussion presented above, we can propose the following: (i) Alloys possessing a low cohesive energy are associated with a high mobility of atoms and are suitable for ferromagnetic shape-memory materials; (ii) Alloys showing a low energy fluctuation show ferromagnetic shape-memory and are favored for use as memory devices. We found that I (iodine) is the best dopant for Fe,Pt ferromagnetic SMA, and Tc (technetium) is the best dopant for Fe,Pd ferromagnetic SMA. Copyright © 2007 Institute of Electrical Engineers of Japan© 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc. [source]


Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape-memory alloys

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, Issue 2 2004
Youngjean Jung
Abstract This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension,torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd. [source]


Improvements and algorithmical considerations on a recent three-dimensional model describing stress-induced solid phase transformations

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, Issue 11 2002
Ferdinando Auricchio
Abstract During mechanical loading,unloading cycles shape-memory alloys (SMA) are able to undergo large deformations without showing residual strains (pseudoelasticity) or recovering them through thermal cycles (shape memory effect). Motivated by stress-induced solid phase transformations, these unique behaviours induce the SMA exploitation in innovative and commercially valuable applications, stimulating, consequently, the interest in the development of constitutive models. Also if many models are now available in the literature, effective three-dimensional proposals are still few and limited in several aspects. In this paper, a three-dimensional thermomechanical model recently proposed by Souza et al. (European Journal of Mechanics,A/Solids, 1998; 17: 789,806.) is taken into consideration; such a model is of particular interest for its effectiveness and flexibility, but it also shows some limitations and missing links in the algorithmical counterparts. This work discusses some improvements to the original model as well as the development and the implementation of a robust integration algorithm to be adopted in a numerical scheme, such as a finite-element framework. Copyright © 2002 John Wiley & Sons, Ltd. [source]


Visco-elasto-plastic model for martensitic phase transformation in shape-memory alloys

MATHEMATICAL METHODS IN THE APPLIED SCIENCES, Issue 15 2002
Petr Plechá
Abstract Evolution of fine structure in martensite undergoing an isothermal process is modelled on a microscopic level by using a positive homogeneous dissipation potential which can reflect a specific energy needed for a phase transformation between different variants of martensite. The model thus naturally incorporates an activation phenomenon. Existence of a weak solution is proved together with convergence of finite-element approximations. Numerical experiments showing the expected rate-independent hysteresis response are also presented. Copyright © 2002 John Wiley & Sons, Ltd. [source]