Home About us Contact
|
Home About us Contact | ||
|
|
||
Reverse Trend (reverse + trend)
Selected AbstractsExtent of Nontimber Resource Extraction in Tropical Forests: Accessibility to Game Vertebrates by Hunters in the Amazon BasinCONSERVATION BIOLOGY, Issue 2 2003Carlos A. Peres We conducted a basin-wide geographic information system analysis of the nonmotorized accessibility of Amazonian NTFP extraction and estimated the proportion of the Amazon drainage basin within Brazil ( 3.74 million km 2 ) that can be accessed on foot from the nearest navigable river or functional road. We use a long-term series of standardized line-transect vertebrate censuses conducted throughout the region to illustrate the effects of physical accessibility on wildlife densities in terms of hunting pressure as a function of distance from the nearest point of access. Population abundance in large-bodied, prime-target species preferred by game hunters tended to increase at greater distances from the access matrix, whereas small-bodied species ignored by hunters usually showed the reverse trend. In addition, we estimated the proportion of presumably inviolate core areas within nature, extractive, and indigenous reserves of Brazilian Amazonia that are prohibitively remote and unlikely to be overhunted; for instance, only 1.16% of the basin-wide area is strictly protected on paper and is reasonably safe from extractive activities targeted to game vertebrates and other valuable NTFPs. Finally, we discuss the concept of truly undisturbed wildlands in the last major tropical forest regions by distinguishing potentially overharvested areas from those that remain largely or entirely pristine and that maintain viable populations of a full complement of harvest-sensitive species. Resumen: Las actividades de extracción enfocadas en un amplio rango de productos forestales no maderables ( NTFPs ) son omnipresentes en los bosques tropicales. Sin embargo, la extensión de bosques estructuralmente intactos en una determinada región afectada por esta forma de perturbación críptica ha sido escasamente documentada. Realizamos un análisis GIS del acceso no motorizado para la extracción NTFP en el Amazonas y estimamos la proporción de la desembocadura de la cuenca amazónica ( ,3.74 millones de km2 ) a la cual se puede acceder a pie a partir del río navegable o la carretera funcional más cercana. Utilizamos series de censos de vertebrados a largo plazo empleando transectos en línea estandarizados a lo largo de la región para ejemplificar los efectos del acceso físico sobre las densidades de vida silvestre en términos de presión de caza como función de la distancia al punto de acceso más cercano. La abundancia poblacional de especies de cuerpo grande que son blancos preferidos por los cazadores tendió a crecer a mayores distancias de la matriz de acceso, mientras que las especies de cuerpo pequeño ignoradas por los cazadores generalmente muestran la tendencia inversa. Además, estimamos la proporción de áreas medulares presuntamente inviolables dentro de las reservas naturales, extractivas e indígenas del Amazonas brasileño que son prohibitivamente remotas y poco probables de ser sobreexplotadas: por ejemplo, solo el 1.16% del área de la cuenca estrictamente proyectada en papel está razonablemente a salvo de las actividades extractivas de los vertebrados de caza y otras NTFPs valiosas. Finalmente, discutimos el concepto de tierras silvestres verdaderamente no perturbadas en las grandes regiones de bosque tropical restantes diferenciando las áreas potencialmente sobreexplotadas de aquellas que son en su mayor parte o totalmente prístinas y que mantienen poblaciones viables de un complemento total de especies sensibles a la cosecha. [source] Reactor performance with primary/secondary swirl intensity and direction in coal gasification processINTERNATIONAL JOURNAL OF ENERGY RESEARCH, Issue 13 2001Han Chang Cho Abstract In order to evaluate the effect of swirl direction and intensity of primary/secondary stream on pulverized coal gasification performance, a numerical study was conducted. Eulerian and Lagrangian approaches are used for the gas and solid phase, respectively. The computation code was formulated with PSI-cell method, k,, model for turbulence flow, Monte-Carlo method for radiative heat transfer, and eddy dissipation model for gas-phase reaction rate. A one-step two-reaction model is employed for the devolatilization of Kideco coal. Flow and reactor performance are varied by primary/secondary swirl intensity and direction. For weak primary swirl, the WSF region is minimized at the secondary vane angle beginning generation of internal recirculation zone and having peak coal burnout. The flame stability is improved at counterswirl rather than coswirl due to its intense shear. Meanwhile, for strong primary swirl, flow distribution and coal burnout are the reverse trend with those of weak swirl and the flame stability is somewhat enhanced at coswirl rather than counterswirl. To improve coal burnout and flame stability, it is confirmed that the swirl condition be proposed for moving the flame front position toward upstream. Copyright © 2001 John Wiley & Sons, Ltd. [source] Liquid,liquid two-phase flow in pore array microstructured devices for scaling-up of nanoparticle preparationAICHE JOURNAL, Issue 12 2009Shaowei Li Abstract Nanoparticles have been produced by a T-junction microchannel device in our previous work (Li et al., Langmuir. 2008;24:4194-4199). As a scaling-up strategy, pore array microstructured devices were designed to prepare nanoparticles in this article. H2SO4 and BaCl2, respectively, in two phases to form BaSO4 nanoparticles was used as a test system. The characteristics of a well controlled liquid,liquid two-phase flow in the pore array microstructured devices were presented. Nanoparticles with small size and good dispersibility were produced through drop or disk flows in the microstructured devices. The influence of mass transfer and chemical reaction on interfacial tension and flow patterns was discussed based on the experiments. Meanwhile, the effect of the two phase flow patterns on the nanoparticle size was discussed. It was found that the increase of the amount of mass transfer and chemical reaction could change the flow patterns from disk flow to drop flow. The droplet diameter could be changed in a wide range. Flow patterns could be distinguished based on the measured interfacial tension in different concentrations. The prepared nanoparticles were ranged from 10 nm to 30 nm. Apparently the particle size was decreased with the increase of the droplet size in both the drop flow region and the disk flow region whereas it had a reverse trend in the transition region. © 2009 American Institute of Chemical Engineers AIChE J, 2009 [source] Preface: phys. stat. sol. (b) 245/3PHYSICA STATUS SOLIDI (B) BASIC SOLID STATE PHYSICS, Issue 3 2008Christopher W. Smith This is the third Special Issue of physica status solidi (b) focusing on materials with a negative Poisson's ratio or other ,anomalous' physical properties. This issue contains selected papers from the First International Conference on Auxetics and Anomalous Systems held at the University of Exeter, UK, on 4,6 September 2006. Around 50 participants from all over the world as well as from a wide range of scientific and engineering disciplines contributed to what was a highly successful conference. This conference follows in the footsteps of two previous workshops held at the Mathematical Research and Conference Centre in B,dlewo near Pozna,, Poland, in 2004 and 2005 [1, 2]. The papers selected for this issue publish recent results obtained for ,anomalous systems' in experiment, theory and computer simulations. In the following we summarize very briefly their contents. Alderson and Coenen compare the performance of auxetic composites to similar systems with conventional positive Poisson's ratios. They find that there are indeed differences which appear to arise from the change of the overall Poisson's ratio of the composite, some beneficial like a rise in impact tolerance at low impact rates, and others deleterious such as the reduced tolerance at higher impact rates. This is one of the first investigations of possible applications for auxetic materials. The two papers by Gaspar and Koenders both examine the effects of disorder upon anomalous properties, especially negative Poisson's ratio. In the first one Gaspar demonstrates how a mean strain estimate fails to predict negative values of Poisson's ratio because of an inability to account for local fluctuations in elastic properties. For instance it is shown that the volume fraction of auxetic regions in an globally auxetic material (measured experimentally) are smaller than a mean strain homogenisation would require. Koenders and Gaspar explore the elastic properties, and especially Poisson's ratio, of a heterogeneous 2D network of bending beams. They predict auxetic behaviour arising from localised disorder in the packing, and therefore effective locally aggregated elastic properties of the beams. In the three articles by Gatt et al. and Grima et al. models based on simple geometry are used to explain the behaviour of seemingly disparate systems, i.e. 2D honeycombs systems and zeolite SiO2 networks. Two papers concerning honeycombs demonstrate relationships between elastic properties and structure and the bounds for auxetic behaviour. The paper concerning the zeolite Natrolite uses numerical force field based energy minimisation methods to simulate the response of this particular zeolite to applied forces and then simplifies the predicted properties even further by considering structural units as rigid 2D polyhedra linked by flexible hinges. In a similar vein, though using a different approach and concerning a very different form of matter, Heyes shows how the heterogeneity in an assembly of particles in a liquid can affect the elastic properties of a liquid and notably the infinite frequency Poisson's ratio. Heyes uses the Molecular Dynamics approach to simulate a Lennard,Jones fluid under various pressures, notably comparing behaviour under positive and negative pressures. In their first paper Jasiukiewicz and co-authors derive elastic constants of 2D crystals for all four classes of 2D crystalline solids: hexagonal (isotropic), quadratic, rectangular, and oblique systems. In their second paper they demonstrate conditions required for auxetic behaviour of 2D crystals. Auxetic solids are further divided into those with some negative Poisson's ratios (auxetic), all negative Poisson's ratios (completely auxetic) and no negative Poisson's ratios (non-auxetic). Lakes and Wojciechowski consider counterintuitive properties of matter, like negative compressibility, negative Poisson's ratio, negative thermal expansion, negative specific heat, and negative pressure. They present and interpret experimental observations of negative bulk modulus in pre-strained foams. They propose also a constrained microscopic model which exhibits negative compressibility. Finally, they solve a very simple thermodynamic model with negative thermal expansion. Martin et al. take a long stride toward a real world application of auxetic materials with a wide ranging study starting with numerical modelling of a wingbox section to experimental testing in a wind tunnel. They show that an auxetic core in a wing box section can allow a passive aero-elastic response which can be tailored by careful design of the core so that camber, and thus drag, is reduced with increasing airspeed but without sacrificing structural integrity. Miller et al. consider another anomalous physical property, negative thermal expansivity, and its application in the form of particulate composites for amelioration of stresses arising from thermal mismatch. They show via experiments that particles with a negative coefficient of thermal expansion may be used as a composite reinforcer to reduce overall thermal expansion and behave according to the standard volume fraction based models. Narojczyk and Wojciechowski examine the effects of disorder upon the bulk elastic properties of 3D fcc soft sphere systems in terms of particle size. Systems, such as colloids, can be thought of in such terms. The study shows that higher order moments of probability distribution do not influence the bulk elastic properties much, but that lower moments such as the standard deviation of particle size influence the elastic properties greatly. The "hardness" of the particle interaction potential is also important in this context. In general, it is shown that the effect of increasing polydispersity is to increase the Poisson's ratio, except the [110] [10] directions. Scarpa and Malischewsky in their paper on Rayleigh waves in auxetic materials show how the Rayleigh wave speed is affected by the Poisson's ratio. The behaviour is complex and depends upon the homogeneity within the material, for instance slowing with decreasing Poisson's ratio in isotropic solids, but showing the reverse trend and increased sensitivity to Poisson's ratio in laminate composites. Scarpa et al. explore the buckling behaviour of auxetic tubes via three types of model, a simple beam mechanics and Eulerian buckling model, a 3D linear elastic FE model and a bespoke non-linear continuum model. The more sophisticated models provide increasing insight into the buckling behaviour though the simple beam model predicts reasonably well in the pre-buckling linear region. Some unexpected and interesting behaviour is predicted by the continuum model as the Poisson's ratio approaches the isotropic limit of ,1, including increasing sensitivity to Poisson's ratio and rapid mode jumping between integer wave numbers. The paper by Shilko et al. presents an analysis of a particular kind of friction joint, a double lap joint, and explores the effects of altering the elastic properties of one component, in particular it's Poisson's ratio. The manuscript introduces the evolution of smart materials from monolithic materials, and the classification of composites exhibiting negative Poisson's ratios. The paper then presents the case of a double lap joint and performs a sensitivity type study, via a 2D FE model, of the effects of changing the elastic properties and degree of anisotropy of one section of the model on various parameters defining the limits of functionality of the joint. The main finding is that an enhanced shear modulus, via a negative Poisson's ratio, can endow such a friction joint with superior performance. Manufacturing of auxetic materials on a commercial scale has proved to be the largest obstacle to their fuller exploitation. The paper by Simkins et al. explores one route for post processing of auxetic polymers fibres produced by a conventional melt extrusion route. Simkins et al. showed that a post process thermal annealing treatment, with carefully optimised parameters, was able to even out otherwise inhomogenous auxetic properties, and moreover improve other elastic and fracture properties often sacrificed for auxetic behaviour. We gratefully acknowledge the support given by the sponsors of the conference, namely the EPSRC of the UK and Auxetic Technologies Ltd. (UK). We also thank the Scientific Committee, the Organising Committee, and all the participants of the conference. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [source] Effects of stocking density on the nutrient budget and growth of the western king prawn (Penaeus latisulcatus Kishinouye) in a recirculating aquaculture systemAQUACULTURE RESEARCH, Issue 10 2010Le Van Khoi Abstract Intensification in the commercial culture of prawns can have a significant impact on the water quality and hence on the survival, growth and the surrounding environment. The present study aims to evaluate the effects of stocking density on the water quality and performance of the western king prawns (Penaeus latisulcatus) and the nutrient budget of the culture environment. Four stocking densities of 4, 8, 16 and 32 prawns m,2 were tested in 12 recirculating systems. Prawn weight and specific growth rate increased with decreasing stocking density, while the survival rate showed the reverse trend. The mean total ammonia nitrogen, nitrate nitrogen, total phosphorus and soluble reactive phosphorus were significantly higher (P<0.05) at the higher stocking density. The nutrient budget revealed that the prawns could assimilate only 9.34,20.13% nitrogen and 4.97,11.25% phosphorus of the total nutrient inputs. The drained water at harvest was the major sink of phosphorus and nitrogen at stocking densities of 4, 8 and 16, which accounted for 45.59,64.82% and 44.28,65.62% of the total inputs, respectively, while a significant proportion of nitrogen sunk into the sediment at 32 prawns m,2. The study suggested that the stocking densities of western king prawns can be up to 16 prawns m,2 in the recirculating water environment. [source] Some boundary conditions of the expressor culture effect in emotion recognition: Evidence from Hong Kong Chinese perceiversASIAN JOURNAL OF SOCIAL PSYCHOLOGY, Issue 3 2005Sau-Lai Lee In a recent review of the emotion recognition literature, Elfenbein and Ambady (2002) found that recognition is generally more accurate for perceivers from the same cultural group as the emotion expressors. In two studies conducted in Hong Kong, we found little evidence for such expressor culture effect. In contrast, a reverse trend was found in the recognition of several emotions. We interpret these findings in terms of the unique display and decoding rules of emotions in Asian contexts. In addition, the effects of expressor culture were observed only in non-pleasant emotions, but not in happiness. Finally, reaction time data revealed that identification of happiness is an automatic, holistic process, identification of non-pleasant emotions is a relatively capacity-consuming, piecemeal process. [source] Herbivory patterns in mature sugar maple: variation with vertical canopy strata and tree ontogenyECOLOGICAL ENTOMOLOGY, Issue 1 2010SEAN C. THOMAS 1. Although leaf morphology and chemistry show profound changes as trees age, the consequences of such changes to herbivory have received little attention, particularly late in the ontogeny of canopy trees. 2. Using a mobile aerial lift for canopy access, patterns of leaf damage were evaluated in canopy-dominant mature sugar maple (Acer saccharum Marsh) trees ranging from ,20 to 70 cm in diameter, corresponding to an age range of ,40,180 years. 3. Herbivore damage patterns varied in relation to both vertical canopy position (among upper-, mid-, and lower-canopy positions) and with tree size. Damage types attributable to herbivores active on leaf surfaces, including leaf skeletonizers and leaf cutters (both principally Lepidoptera), and leaf stippling inducers (Hemiptera) showed decreases with tree size, and with increasing height in the canopy. In contrast, leaf damage from the most abundant gall-forming arthropod in the system, the eriophyid mite Vasates aceriscrumena, increased markedly with tree size. 4. The results indicate that herbivory patterns vary with both canopy stratum and with tree size in sugar maple, and that the relative strength of vertical stratification and tree ontogeny effects are similar in magnitude. The predominant patterns are of a decrease in herbivory with increasing height in the canopy and with tree size, but certain galling arthropods exhibit the reverse trends. [source] Australia's National Action Plan for Salinity and Water Quality: a retrospective assessment,AUSTRALIAN JOURNAL OF AGRICULTURAL & RESOURCE ECONOMICS, Issue 4 2010David J. Pannell Perceptions of a salinity ,crisis' in Australia around 2000 resulted in the establishment of a major national program that aimed to prevent, stabilize, and reverse trends in salinity. The National Action Plan for Salinity and Water Quality allocated A$1.4 billion of public funds to 1700 projects over 7 years. Here, we assess the performance of the program in relation to 12 features that we propose as being essential for programs that aim to address complex environmental problems. The features include use of technical information to guide investment prioritization, use of socio-economic information, effective integration of information for prioritization, selection of appropriate targets, choice of appropriate policy mechanisms, and provision of incentives and support to environmental managers to pursue environmental outcomes cost effectively. Our assessment reinforces findings from a number of public reviews that found serious weaknesses in the program. Overall, with a few exceptions, projects under the National Action Plan generated few worthwhile salinity mitigation benefits and will have little enduring benefit. This was readily foreseeable given attention to the scientific and economic knowledge of salinity available at the time the program was developed. [source] | ||||||||||