Home About us Contact
|
Home About us Contact | ||
|
|
||
Retention Properties (retention + property)
Selected AbstractsCapillary electrochromatography with monolithic silica column:,I.ELECTROPHORESIS, Issue 3 2003Preparation of silica monoliths having surface-bound octadecyl moieties, applications to the separation of neutral, charged species, their chromatographic characterization Abstract Monolithic silica columns with surface-bound octadecyl (C18) moieties have been prepared by a sol-gel process in 100 ,m ID fused-silica capillaries for reversed-phase capillary electrochromatography of neutral and charged species. The reaction conditions for the preparation of the C18-silica monoliths were optimized for maximum surface coverage with octadecyl moieties in order to maximize retention and selectivity toward neutral and charged solutes with a sufficiently strong electroosmotic flow (>,2 mm/s) to yield rapid analysis time. Furthermore, the effect of the pore-tailoring process on the silica monoliths was performed over a wide range of treatment time with 0.010 M ammonium hydroxide solution in order to determine the optimum time and conditions that yield mesopores of narrow pore size distribution that result in high separation efficiency. Under optimum column fabrication conditions and optimum mobile phase composition and flow velocity, the average separation efficiency reached 160,000 plates/m, a value comparable to that obtained on columns packed with 3 ,m C18-silica particles with the advantages of high permeability and virtually no bubble formation. The optimized monolithic C18-silica columns were evaluated for their retention properties toward neutral and charged analytes over a wide range of mobile phase compositions. A series of dimensionless retention parameters were evaluated and correlated to solute polarity and electromigration property. A dimensionless mobility modulus was introduced to describe charged solute migration and interaction behavior with the monolithic C18-silica in a counterflow regime during capillary electrochromatography (CEC )separations. The mobility moduli correlated well with the solute hydrophobic character and its charge-to-mass ratio. [source] Analysis of hepatic vitamins A1, A2, their fatty acyl esters, and vitamin E for biomonitoring mammals feeding on freshwater fishENVIRONMENTAL TOXICOLOGY & CHEMISTRY, Issue 2 2002Anne Käkelä Abstract In tissues of freshwater fish,feeding mammals, 3,4-didehydroretinol (A2) is a major form of vitamin A. In mink liver, with organochlorine exposure, this analog has been found to decrease more than retinol (A1) and thus has potential as a sensitive freshwater biomarker. The presence of the analogs A1 and A2 as alcohol and different fatty acyl esters, which react to polychlorinated biphenyls differently, necessitates detailed analyses achieved by using direct extraction of tissue homogenate. In direct hexane extraction, compared to total levels of the vitamins obtained in the saponification procedure, a large proportion of the vitamins was released only after repeated and long-time vortex mixing with the extraction solvent. Thus, in tissue extraction, the use of internal standardization alone can lead to a rough underestimation of the levels of these fat-soluble vitamins. For analyses of vitamins A1 and A2 in liver, we applied the argentation high-performance liquid chromatography, which provided good separation of individual A1 and A2 fatty acyl esters. We report retention times for numerous esters of A1 and A2 and, to aid identification, the change in their retention properties after adding AgNO3 to the mobile phase. The argentation did not affect the recoveries of any forms of the retinoids studied but destroyed half the vitamin E. Despite selective acylation of fatty acids into the vitamin A esters, the fatty acids of the esters were the same as those found to be the major fatty acids in the gas,liquid chromatography of total lipids. The goal of this work was to create a methodology that is suitable for biomonitoring alcoholic and esterified vitamins A1 and A2 in tissues of freshwater fish,feeding mammals. [source] Effects of tractor wheeling on root morphology and yield of lucerne (Medicago sativa L.)GRASS & FORAGE SCIENCE, Issue 3 2008Summary The purpose of this study was to determine the effect of soil compaction on the herbage yield and root growth of lucerne (Medicago sativa L.). A field experiment was conducted on a silty loam Mollic Fluvisols soil in 2003,2006. Herbage yield and root morphology, in terms of root length density, mean root diameter, specific root length and distribution of dry matter (DM) in roots, were measured. Four compaction treatments were applied three times annually by tractor using the following number of passes: control without experimental traffic, two passes, four passes and six passes. The tractor traffic changed the physical properties of the soil by increasing bulk density and penetration resistance. Soil compaction also improved its water retention properties. These changes were associated with changes in root morphology and distribution of the DM in roots. Soil compaction resulted in higher proportions of the DM in roots, especially in the upper, 0,10 cm, soil horizon. Decreases in the root length density were observed in a root diameter range of 0·1,1·0 mm. It was also found that roots in a more compacted soil were significantly thicker. An effect of the root system of lucerne on soil compaction was observed. The root system of lucerne decreased the effects of soil compaction that had been recorded in the first and the second year of the experiment. An increase in the number of passes resulted in a decrease in the DM yield of herbage in the second and third harvests each year. [source] ACMEG-TS: A constitutive model for unsaturated soils under non-isothermal conditionsINTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, Issue 16 2008Bertrand François Abstract This paper introduces an unconventional constitutive model for soils, which deals with a unified thermo-mechanical modelling for unsaturated soils. The relevant temperature and suction effects are studied in light of elasto-plasticity. A generalized effective stress framework is adopted, which includes a number of intrinsic thermo-hydro-mechanical connections, to represent the stress state in the soil. Two coupled constitutive aspects are used to fully describe the non-isothermal behaviour. The mechanical constitutive part is built on the concepts of bounding surface theory and multi-mechanism plasticity, whereas water retention characteristics are described using elasto-plasticity to reproduce the hysteretic response and the effect of temperature and dry density on retention properties. The theoretical formulation is supported by comparisons with experimental results on two compacted clays. Copyright © 2008 John Wiley & Sons, Ltd. [source] Rain forest invasion of eucalypt-dominated woodland savanna, Iron Range, north-eastern Australia: II.JOURNAL OF BIOGEOGRAPHY, Issue 8 2004Rates of landscape change Abstract Aim, To explore rates of rain forest expansion and associated ecological correlates in Eucalyptus -dominated woodland savanna vegetation in north-eastern Australia, over the period 1943,91. Location, Iron Range National Park and environs, north-east Queensland, Australia. This remote region supports probably the largest extent of lowland (< 300 m) rain forest extant in Australia. Rainfall (c. 1700 mm p.a.) occurs mostly between November and June, with some rain typically occurring even in the driest months July,October. Methods, Interpretation of change in lowland rain forest vegetation cover was undertaken for a 140 km2 area comprising complex vegetation, geology and physiography using available air photos (1943, 1970 and 1991). A GIS database was assembled comprising rain forest extent for the three time periods, geology, elevation, slope, aspect, proximity to streams and roads. Using standard GIS procedures, a sample of 6996 10 × 10 m cells (0.5% of study area) was selected randomly and attributed for vegetation structure (rain forest and non-rain forest), and landscape features. Associations of rain forest expansion with landscape features were examined with logistic regression using the subset of cells that had changed from other vegetation types to rain forest, and remained rain forest over the assessment period, and comparing them with cells that showed no change from their original, non-rain forest condition. Results, Rain forest in the air photo study area increased from 45 km2 in 1943 to 78.1 km2 by 1970, and to 82.6 km2 by 1991. Rainfall (and atmospheric CO2 concentration) was markedly lower in the first assessment period (1943,70). Modelled rates of rain forest invasion differed predominantly with respect to substrate type, occurring faster on substrates possessing better moisture retention properties, and across all elevation classes. Greatest expansion, at least in the first assessment period, occurred on the most inherently infertile substrates. Expansion was little constrained by slope, aspect and proximity to streams and roads. On schist substrates, probability of invasion remained high (> 60%) over distances up to 1500 m from mature rain forest margins; on less favourable substrates (diorite, granites), probability of expansion was negligible at sites more than 400 m from mature margins. Main conclusions, (i) Rain forest expansion was associated primarily with release from burning pressure from c. the 1920s, following major disruption of customary Aboriginal lifestyles including hunting and burning practices. (ii) Decadal-scale expansion of rain forest at Iron Range supports extensive observations from the palaeoecological literature concerning rapid rain forest invasion under conducive environmental conditions. (iii) The generality of these substrate-mediated observations requires further testing, especially given that landscape-scale rain forest invasion of sclerophyll-dominated communities is reported from other regions of north-eastern Australia. [source] Preparation and characterization of highly polar polymeric sorbents from styrene,divinylbenzene and vinylpyridine,divinylbenzene for the solid-phase extraction of polar organic pollutantsJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 13 2003Núria Fontanals Abstract This article explores the synthesis of styrene,divinylbenzene resins with different surface areas and the influence of these surface areas on their performance in the solid-phase extraction of polar compounds from water samples. As expected, increasing the surface areas increases the retention capability of polar compounds. To improve the retention properties, we have used 4-vinylpyridine instead of styrene in the polymerization and evaluated the influence of the sorbent polarity and surface area on the retention properties. We have found that a compromise is required between the percentage of 4-vinylpyridine, which increases the polarity of the sorbent, and the percentage of divinylbenzene, which increases the surface area. In the solid-phase extraction of polar compounds, the results are best for a polymer containing 2.14% N and having a surface area of 710 m2/g. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1927,1933, 2003 [source] Spin-Coating-Derived Gold-Nanoparticle MemoryJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 10 2010Ching-Chich Leu A metal,oxide,semiconductor (MOS) capacitor embedded with gold nanoparticles (Au NPs) has been successfully fabricated by a spin-coating-derived chemical solution process. The colloidal synthesized Au NPs (,3.5 nm) were self-assembled to 3-aminopropyltrimethoxysilane-modified silicon oxide substrates. With the spin-coating process, Au NPs can be fabricated onto silicon oxide with a high packing density of 1.6 × 1012 cm,2 in a short processing time. The sol,gel-derived HfO2 layer, acting as a control oxide, was also spin coated to construct an Si/SiO2/Au NPs/HfO2 structure. This MOS structure showed good memory effect and retention properties. This study indicates that it is appropriate to utilize the spin-coating process in nanocrystal memory applications. [source] Enantiomeric separation by HPLC of 1,4-dihydropyridines with vancomycin as chiral selectorCHIRALITY, Issue 6 2003Gianpiero Boatto Abstract The macrocyclic antibiotics represent a relatively new class of chiral selectors in CE, HPLC, and TLC. We have examined the use of the macrocyclic antibiotic vancomycin as a chiral selector in HPLC for the separation of 1,4-dihydropyridines (DHPs) calcium antagonists (CAs). Chromatographic data of six 1,4-dihydropyridine calcium channel blockers obtained on the vancomycin chiral stationary phase (Chirobiotic V) were compared with those obtained on an ,1 -acid glycoprotein (AGP) HPLC stationary phase. Optimization of pH and organic modifier was carried out in order to modulate the retention properties of each system. All chiral neutral DHPs were resolved on the AGP column, whereas on Chirobiotic V only basic DHPs showed a split peak. The analytical chromatographic procedure on Chirobiotic V proved suitable for semipreparative separation, since the separation factor on the analytical column was high enough to obtain pure enantiomers with high yields. Chirality 15:494,497, 2003. © 2003 Wiley-Liss, Inc. [source] | |||||||||||||