			Home About us Contact

Provisional Restoration (provisional + restoration)

Distribution by Scientific Domains

Medical Sciences	100%

Selected Abstracts

Provisional restoration options in implant dentistr

AUSTRALIAN DENTAL JOURNAL, Issue 3 2007
RE Santosa
Abstract Unlike their use in conventional crown and bridge, provisional restorations during implant therapy have been underutilized. Provisional restorations should be used to evaluate aesthetic, phonetic and occlusal function prior to delivery of the final implant restorations, while preserving and/or enhancing the condition of the peri-implant and gingival tissues. Provisional restorations are useful as a communication tool between members of the treatment team which, in most cases, consists of the restorative clinician, implant surgeons, laboratory technicians, and the patient. This article describes and discusses the various options for provisionalization in implant dentistry. Clinicians should be aware of the different types of provisional restorations and the indications for their use when planning implant retained restorations. [source]

Rationale for esthetic tissue preservation of a fresh extraction socket by an implant treatment concept simulating a tooth replantation

DENTAL TRAUMATOLOGY, Issue 1 2010
Georgia Trimpou
A soft-tissue recession must be avoided, whether it is due to a compression of the peri-implant soft-tissue caused by an over-dimensioned restoration in the cervical collar of the provisional crown or to a too small dimensioned sulcus former. A simulation of the exact dimension of the lost tooth , especially on the cervical part of the new provisional restoration , is expected to preserve all relevant information and allows the design of a naturally looking emergence profile. Based on theoretical considerations and a case report, the authors intend to demonstrate that a near-naturally dimensioned sealing of the dento-gingival soft-tissue collar may initiate a tissue-maintaining healing process, similar to a tooth replantation. The natural dental crown, connected to an implant instead of the root, is applied for a tight sealing of the wound. If due to traumatic impact the tooth is no longer available, a naturally dimensioned crown restoration will serve as an alternative wound sealant. [source]

Immediate single-tooth implants in the anterior maxilla: a 1-year case cohort study on hard and soft tissue response

JOURNAL OF CLINICAL PERIODONTOLOGY, Issue 7 2008
Tim De Rouck
Abstract Aim: The objective of the present study was to assess implant survival rate, hard and soft tissue response and aesthetic outcome 1 year after immediate placement and provisionalization of single-tooth implants in the pre-maxilla. All patients underwent the same strategy, that is mucoperiosteal flap elevation, immediate implant placement, insertion of a grafting material between the implant and the socket wall and the connection of a screw-retained provisional restoration. Material and Methods: Thirty consecutive patients were treated for single-tooth replacement in the aesthetic zone by means of immediate implant placement and provisionalization. Reasons for tooth loss included caries, periodontitis or trauma. At 6 months, provisional crowns were replaced by the permanent ones. Clinical and radiographic evaluation was completed at 1, 3, 6 and 12 months to assess implant survival and complications, hard and soft tissue parameters and patient's aesthetic satisfaction. Results: One implant had failed at 1 month of follow-up, resulting in an implant survival rate of 97%. Radiographic examination yielded 0.98 mm mesial, respectively, 0.78 mm distal bone loss. Midfacial soft tissue recession and mesial/distal papilla shrinkage were 0.53, 0.41and 0.31 mm, respectively. Patient's aesthetic satisfaction was 93%. Conclusions: The preliminary results suggest that the proposed strategy can be considered to be a valuable treatment option in well-selected patients. [source]

Immediate Maxillary Lateral Incisor Implants with Nonocclusal Loading Provisional Crowns

JOURNAL OF PROSTHODONTICS, Issue 1 2008
Miguel Peñarrocha MD
Abstract This clinical report series describes a treatment modality involving immediately placed dental implants in maxillary lateral incisor sites using noncemented immediate provisional crowns retained with calcinable copings (prosthetic complement used in preparing the metal for the definitive prosthesis). Ten implants were placed in eight patients for the replacement of maxillary lateral incisors: two immediate and eight corresponding to cases of agenesis. All were subjected to immediate rehabilitation with provisional acrylic resin crowns in nonocclusal loading. One implant failed 3 weeks after placement due to acute local trauma. The other nine remained functional within the mouth, with normal clinical and radiological characteristics after a minimum of 12-month follow-up. Immediate placement of implant fixed provisional restorations retained by friction in maxillary lateral incisors offers an esthetic solution, eliminates the need for a removable provisional restoration, and avoids implant failures associated with excess cement or screw loosening. Moreover, in the case of extractions, immediate placement and provisionalization of implants in maxillary lateral incisors can effectively optimize the peri-implant esthetic results by maintaining the existing hard and soft tissue architecture of the replaced tooth. As no cement or screws are required, and the provisional crowns are placed in nonocclusal loading, the risk of complications is minimized. [source]

A system for the diagnosis, placement, and prosthetic restoration of root form implants (U.S. Patent #5,769,636)

JOURNAL OF PROSTHODONTICS, Issue 1 2003
Francesco Di Sario DDS
It is difficult to achieve a high degree of reproducibility when using a diagnostic wax-up as the template for fabrication of a definitive implant restoration. Here a method for implant prosthesis treatment planning is described that allows fabrication of the provisional restoration before surgical placement of the implant. The method involves 6 steps: (1) determining the mesiodistal inclination of the implant, (2) determining the buccolingual dimension of the alveolar ridge, (3) determining the proper position of the implant, (4) fabricating the surgical guide, (5) fabricating the provisional restoration, and (6) performing surgical placement of the implant followed by immediate placement of the provisional restoration. [source]

A provisional fixed partial denture that simulates gingival tissue at the pontic-site defect

JOURNAL OF PROSTHODONTICS, Issue 1 2002
Reem Haj-Ali BDS
A technique is presented for the fabrication of an esthetic, provisional fixed partial denture that compensates for a pontic-site ridge defect. This provisional restoration enables both the dentist and the patient to evaluate whether this prosthetic approach will adequately camouflage the pontic-site defect or whether surgical correction of the pontic site should also be considered. [source]

Fabricating a provisional restoration for a 2-stage, single-tooth implant with less than optimal angulation

JOURNAL OF PROSTHODONTICS, Issue 4 2001
Ahmad Maalhagh-Fard DDS
A technique is presented for fabricating a provisional restoration for a buccally angulated implant. This technique describes the fabrication of a provisional restoration for a labially angulated implant. This technique helps the prosthodontists to achieve esthetics and soft-tissue health until the definitive restoration is available. [source]

Patient assessment and diagnosis in implant treatment

AUSTRALIAN DENTAL JOURNAL, Issue 2008
NU Zitzmann
Abstract As in any dental treatment procedure, a thorough patient assessment is a prerequisite for adequate treatment planning including dental implants. The literature was searched for references to patient assessment in implant treatment up to September 2007 in Medline via PubMed and an additional handsearch was performed. Patient assessment included the following aspects: (1) evaluation of patient's history, his/her complaints, desires and preferences; (2) extra-and intra-oral examination with periodontal and restorative status of the remaining dentition; (3) obligatory prerequisites were a panoramic radiograph and periapical radiographs (at least from the adjacent teeth) for diagnosis and treatment planning. Additional tomographs are required depending on the anatomic situation and the complexity of the planned restoration; (4) study casts are needed especially in more complex situations also requiring a diagnostic set-up, which can be tried-in and transferred into a provisional restoration as well as into a radiographic and surgical template. The current review clearly revealed the necessity for a thorough, structured patient assessment. Following an evaluation, a recommendation is given for implant therapy or, if not indicated, conventional treatment alternatives can be presented. [source]

In vitro evaluation of the accuracy of five different electronic apex locators for determining the working length of endodontically retreated teeth

AUSTRALIAN ENDODONTIC JOURNAL, Issue 1 2007
Aqeel Khalil Ebrahim bds
Abstract The aim of this study was to evaluate the accuracy of five electronic apex locators (EALs) in determining the working length (WL) of teeth after removal of the root canal obturation materials. A total of 32 extracted straight, single-rooted teeth were used. The actual canal length (AL) was determined and the WL was established by subtracting 0.5 mm from the AL. The root canals were instrumented and divided into two groups. One group (n = 6) served as control, while the other group (n = 26) was the experimental group. In the experimental group, the root canals were obturated using vertically compacted gutta-percha with AH 26 sealer. In both groups, the access cavities were restored with a provisional restoration and stored for 15 days at 37°C and 100% humidity. The root canal obturation material was removed, and the teeth were then mounted in an experimental apparatus. Five EALs were used: Dentaport ZXTM®, ProPex, Foramatron D10, Apex NRG and Apit 7. For the electronic measurement of canal length, a size 25 K-file was used. During measurement, the canal was irrigated with 2.5% sodium hypochlorite. The difference (D) between the AL and the electronically determined length (EDL), AL,EDL, was calculated and recorded for each measurement. Data were analysed by two-way anova and Fisher's PLSD test. In both groups, statistically significant differences were found among the EALs (P < 0.01). In conclusion, the Dentaport ZXTM®, ProPex and Foramatron D10 were more accurate than the other two EALs in determining the WL in teeth after removal of the root canal obturation materials. However, the Apex NRG and Apit 7 were also reliable for determination of the WL in the majority of the cases. [source]

Syncrystallization: A Technique for Temporization of Immediately Loaded Implants with Metal-Reinforced Acrylic Resin Restorations

CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 3 2006
Marco Degidi MD
ABSTRACT Background, Rigid temporization has been recognized to have a significant impact on the peri-implant tissue response in immediate implant loading since it reduces the mechanical stress exerted on each implant. Purpose, A successful protocol for immediate loading of multiple implants depends on an adequate fixation and immobility of the implants to prevent the risk of micromovements in relation to the surrounding bone. The objective of this article was to evaluate a prosthetic concept for an accelerated rigid splinting of multiple implants for same-day immediate loading with metal-reinforced provisional restorations using a technique of welding temporary implant abutments with a prefabricated titanium bar directly in the oral cavity (syncrystallization). Materials and Methods, Between June 2004 and January 2005, immediate loading of threaded implants with a metal- reinforced acrylic resin provisional restoration at stage 1 surgery was evaluated in 40 consecutive patients. A total of 192 implants were placed in selected edentulous or partially edentulous patients using the syncrystallization technique. Once the titanium bar was welded intraorally to the abutments, opaque was applied and the provisional restoration was relined and screw-retained the same day. In addition, a comparison of deformations and stress distributions in implant-supported, metal-reinforced and nonmetal-reinforced resin provisional restorations was analyzed in the edentulous mandible by a three-dimensional finite element model (FEM). Results, All of the 192 rigidly temporized immediately loaded implants osseointegrated. An implant success rate of 100% was achieved over a period of 6 months postplacement. No fracture or luting cement failure of the provisional restoration occurred during the observation time. Compared to mere acrylic superstructures, a significant reduction of deformation and strain within metal-reinforced provisional restorations was detected by FEM analysis. Conclusion, The results of this study indicate that the syncrystallization technique allows an expedite and adequate rigid splinting of multiple immediately loaded implants. The advantages of the technique are: (1) reduction of treatment time for immediate temporization at stage 1 surgery; (2) predictable fixation and immobility of implants in the early stages of bone healing; and (3) less time for repairing provisional restorations as a result of no or rare fracture. [source]

Early loading (2 or 6 weeks) of sandblasted and acid-etched (SLA) ITI® implants in the posterior mandible

CLINICAL ORAL IMPLANTS RESEARCH, Issue 2 2004
A 1-year randomized controlled clinical trial
Abstract: The aim of this 1-year prospective controlled clinical trial was to evaluate the effect of early loading of ITI® solid screw titanium implants with a sandblasted and acid-etched (SLA) surface on clinical and radiographic parameters. Material and methods: Twenty-seven consecutively admitted patients presenting bilateral edentulous posterior mandibular areas and in need of prosthetic reconstruction were recruited. Sixty-seven ITI® standard solid screw implants with an SLA surface, a diameter of 4.1 mm and a length of 8, 10 or 12 mm were installed bilaterally in molar and premolar areas according to a one-stage surgical protocol. One week (test) and 5 weeks (control) after implant placement, solid ITI® prosthetic abutments were connected using a torque of 35 N cm. No provisional restoration was fabricated. Two weeks (test) and 6 weeks (control) after implant placement, porcelain-fused-to-metal single-tooth crowns were cemented. Clinical measurements were obtained at day 0 and 2, 6, 12, 24 and 52 weeks thereafter. Periapical radiographs were taken immediately after implant placement, after 6 weeks and at the 1-year examination. Results: After 1 year, implant survival was 100%. Two test and one control implants rotated at the time of abutment connection and were left unloaded for 12 additional weeks. At the 1-year examination, no statistically significant differences were found between the test and control sites with respect to pocket probing depths (2.6 mm±0.5 vs. 2.7 mm±0.5), mean clinical attachment levels (3.1 mm±0.4 vs. 3.2 mm±0.5), mean percentages of sites bleeding on probing (9.7% vs. 8.3%), mean widths of keratinized mucosa (1.8 mm±0.4 vs. 1.9 mm±0.5), mean PerioTest® values (,1.4 PTV±0.9 vs. ,1.6 PTV±0.8) or mean crestal bone loss measurements (0.57 mm±0.49 vs. 0.72 mm±0.50). Conclusion: Based on these results, loading of titanium implants with an SLA surface as early as 2 weeks did not appear to jeopardize the osseointegration healing process in the posterior mandible. Furthermore, implants rotating at 35 N cm, if left unloaded for additional 12 weeks, did not negatively affect clinical and radiographic outcomes. Résumé Le but de cet essai clinique contrôlé prospectif d'une année a été d'évaluer l'effet de la mise en charge précoce d'implants en titane vis solide ITI® avec une surface sablée et mordancée (SLA) sur des paramètres cliniques et radiographiques. Vingt-sept patients présentant des aires bilatérales mandibulaires postérieures édentées et nécessitant donc une reconstruction prothétique ont été recrutés. Soixante-sept implants ITI® d'un diamètre de 4,1 mm et d'une longueur de 8, 10 ou 12 mm ont été placés bilatéralement dans les zones molaires et prémolaires suivant le processus chirurgical en une étape. Une semaine (test) et cinq semaines (contrôle) après leur placement des piliers prothétiques ITI® ont été serrés avec une force de 35 Ncm. Aucune restauration provisoire n'a été fabriquée. Deux semaines (test) et six semaines (contrôle) après le placement des implants des couronnes céramo-métalliques indépendantes ont été cimentées. Des mesures cliniques ont été obtenues aux jours 0 et deux, et aux semaines 6, 12, 24 et 52. Des radiographies périapicales ont été prises immédiatement après le placement des implants, après six semaines et une année. Après une année, le taux de survie implantaire était de 100%. Deux implants tests et un contrôle pivotaient au moment de la connexion du pilier et ont été laissés non-chargés pour 12 semaines supplémentaires. Après une année, aucune différence statistique n'a été trouvée entre les sites tests et contrôles en ce qui concerne les profondeurs de poches au sondage (2,6 ±0,5 mm vs 2,7± 0,5 mm), les niveaux d'attache clinique moyens (3,1±0,4 vs 3,2±0,5 mm,) les pourcentages moyens de sites saignant au sondage (9,7% vs 8,3%), les largeurs moyennes de muqueuse attachée (1,8±0,4 mm vs 1,9±0,5 mm), les valeurs Periotest moyennes (,1,4±0,9 PTV vs ,1,6 ±0,8 PTV) ou les mesures de perte osseuse crestale moyennes (0,57 ± 0,49 mm vs 0,72±0,52 mm). La charge d'implants en titane avec surface SLA aussitôt que deux semaines après leur placement ne semblait pas mettre en danger le processus d'ostéoïntégration dans la partie postérieure de la mandibule. De plus, les implants pivotant à 35 Ncm, si laissés non-chargés pour douze semaines supplémentaires, n'affectaient pas de manière négative les mesures cliniques et radiographiques. Zusammenfassung Material und Methoden: Es wurden siebenundzwanzig Patienten mit beidseits zahnlosem Seitenzahnbereich im Unterkiefer, welche eine prothetische Versorgung benötigten, in die Studie aufgenommen. Es wurden 67 ITI® Standard Vollschraubenimplantate mit einem Durchmesser von 4.1 mm und einer Länge von 8, 10 oder 12 mm beidseits in der Molaren- und Prämolarenregion transmukosal eingesetzt. Eine Woche (Test) und 5 Wochen (Kontrolle) nach Implantation wurden ITI® Massivsekundärteile mit einem Drehmoment von 35 Ncm eingesetzt. Es wurde keine provisorische Versorgung angefertigt. Zwei Wochen (Test) und 6 Wochen (Kontrolle) nach Implantation wurden Gold-Porzellan Einzelkronen einzementiert. Klinische Messungen wurden am Tag 0 und nach 2, 6, 12, 24, und 52 Wochen aufgenommen. Periapikale Röntgenaufnahmen wurden sofort nach der Implantation, nach 6 Wochen und anlässlich der 1 Jahreskontrolle angefertigt. Resultate: Nach einem Jahr betrug die Implanta-tüberlebensrate 100%. Zwei Test- und ein Kontrollimplantat drehten sich beim Einschrauben der Sekundärteile und wurden für zusätzliche 12 Wochen unbelastet belassen. Bei der 1 Jahresuntersuchung konnten zwischen Test- und Kontrolli-mplantaten keine statistisch signifikanten Unterschiede bezüglich Sondierungswerten (2.6mm+/,0.5 gegenüber 2.7mm +/,0.5), mittlerem klinischem Attachmentniveau (3.1mm +/,0.4 gegenüber 3.2mm +/,0.5), mittlerem Prozentanteil beim Bluten auf Sondieren (9.7% gegenüber 8.3%), mittlerer Breite der keratinisierten Mukosa (1.8mm +/,0.4 gegenüber 1.9mm +/,0.5), mittleren Periotest® Werten (,1.4 PTV +/,0.9 gegenüber ,1.6 PTV +/,0.8) oder mittlerem marginalem Knochenverlust (0.57mm +/,0.49 gegenüber 0.72mm +/,0.50) gefunden werden. Schlussfolgerung: Gemäss dieser Resultate schien die Belastung von Titanimplantaten mit SLA Oberfäche bereits nach 2 Wochen den Heilungsprozess der Osseointegration im posterioren Unterkiefer nicht zu beeinträchtigen. Implantate, die bei 35Ncm rotierten und daraufhin für weitere 12 Wochen unbelastet blieben, beeinflussten die klinischen und radiologischen Resultate nicht negativ. Resumen La intención de este ensayo clínico prospectivo controlado fue evaluar el efecto de una carga temprana sobre implantes macizos roscados de titanio con una superficie pulverizada con arena y gravada con ácido (SLA) sobre parámetros clínicos y radiográficos. Material y Métodos: Se reclutaron veintisiete pacientes consecutivamente admitidos que presentaron áreas edéntulas bilaterales en la mandíbula posterior y necesitando reconstrucción protésica. Se instalaron bilateralmente en las áreas molar y premolar sesenta y siete implantes ITI® estándar macizos roscados de titanio con una superficie SLA, un diámetro de 4.1 mm y una longitud de 8, 10 o 12 mm de acuerdo con un protocolo quirúrgico de una sola fase. Una semana (prueba) y 5 semanas (control) tras la colocación del implante, se conectaron pilares prostéticos macizos ITI usando un torque de 35 Ncm. No se fabricaron restauraciones provisionales. Dos semanas (prueba) y 6 semanas (control) tras la colocación de los implantes, se cementaron coronas unitarias metalocerámicas. Se obtuvieron medidas clínicas en el día 0 y tras 2, 6, 12, 24 y 52 semanas. Se tomaron radiografías periapicales inmediatamente tras la colocación del implante, a las 6 semanas y en el examen de 1 año. Resultados: Tras 1 año, la supervivencia de los implantes fue del 100%. Dos implantes de prueba y uno de control rotaron en el momento de la conexión del pilar y se dejaron sin carga durante 12 semanas más. En el examen de 1 año, no se encontraron diferencias significativas entre los lugares de prueba y los de control respecto a las profundidades de sondaje (2.6 mm±0.5 vs. 2.7 mm±0.5), niveles medios de inserción clínica (3.1±mm±0.4 vs. 3.2 mm±0.5), porcentaje medio de lugares con sangrado al sondaje (9.7% vs. 8.3%), anchura media de mucosa queratinizada (1.8 mm±0.4 vs. 1.9 mm±0.5), valores medios de Perio Test® (,1.4 PTV±0.9 vs. ,1.6 PTV±0.8) o a las medidas medias de perdida de hueso crestal (0.57 mm±0.49 vs. 0.72 mm±0.50). Conclusiones: Basándose en estos resultados, la carga de implantes de titanio con superficie SLA tan pronto como a las 2 semanas no pareció comprometer el proceso de cicatrización de la osteointegración en la mandíbula posterior. Mas aun, los implantes que rotaron a 35 Ncm, si se dejan sin carga durante 12 semanas más, no afectaron negativamente los resultados clínicos y radiográficos. [source]

IMMEDIATE LOADING OF IMPLANTS IN THE ESTHETIC ZONE

JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY, Issue 5 2005
Saj Jivraj DDS
The predictability of dental implants using the traditional Branemark protocol has been well documented. Since its inception, this protocol has been progressively challenged to decrease treatment time, minimize the number of surgical procedures, and maximize esthetic outcomes. Today, in specific clinical situations, implants may be placed and immediately loaded with provisional restorations. Immediate loading in the edentulous mandible has been well documented. There are also good data to show that immediate loading of the edentulous maxilla is also feasible if bone quality is suitable. The focus now has shifted toward immediate loading of implants placed in the esthetic zone. Clinicians have recognized that the challenge of providing anterior tooth replacements is in preserving the hard and soft tissue components that exist around natural teeth. The advantages of immediate restoration are obvious; however, the application of immediate or early load may pose an increased risk of implant failure in single-tooth situations. The prerequisites for achieving and maintaining acceptable results are not fully known. This review examines some of the literature concerning the reliability of early or immediate loading of implants placed in the esthetic zone. [source]

Immediate Maxillary Lateral Incisor Implants with Nonocclusal Loading Provisional Crowns

Titanium-bar reinforced provisional restorations

JOURNAL OF PROSTHODONTICS, Issue 4 2002
Heesang Yang DMD
[source]

Provisional restoration options in implant dentistr

Early Loading after 21 Days of Healing of Nonsubmerged Titanium Implants with a Chemically Modified Sandblasted and Acid-Etched Surface: Two-Year Results of a Prospective Two-Center Study

CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH, Issue 1 2010
Dean Morton BDS
ABSTRACT Purpose: The aim of this two-center study was to evaluate screw-type titanium implants with a chemically modified, sandblasted and acid-etched surface when placed in the posterior maxilla or mandible, and loaded 21 days after placement. Material and Methods: All 56 patients met strict inclusion criteria and provided informed consent. Each patient displayed either a single-tooth gap, an extended edentulous space, or a distal extension situation in the posterior mandible or maxilla. Eighty-nine dental implants (SLActive®, Institut Straumann AG, Basel, Switzerland) were inserted according to an established nonsubmerged protocol and underwent undisturbed healing for a period of 21 days. Where appropriate, the implants were loaded after 21 days of healing with provisional restorations in full occlusion. Definitive metal ceramic restorations were fabricated and positioned on each implant after 6 months of healing. Clinical measurements regarding soft tissue parameters and radiographs were obtained at different time points up to 24 months after implant placement. Results: Of the 89 inserted implants, two (2.2%) implants failed to integrate and were removed during healing, and two (2.2%) additional implants required a prolonged healing time. A total of 85 (95.6%) implants were therefore loaded without incident after 21 days of healing. No additional implant was lost throughout the study period, whereas one implant was lost to follow-up and therefore left unaccounted for further analysis. The remaining 86 implants all exhibited favorable radiographic and clinical findings. Based on strict success criteria, these implants were considered successfully integrated 2 years after insertion, resulting in a 2-year success rate of 97.7%. Conclusion: The results of this prospective two-center study demonstrate that titanium implants with a modified SLA surface can predictably achieve successful tissue integration when loaded in full occlusion 21 days after placement. Integration could be maintained without incident for at least 2 years of follow-up. [source]

Syncrystallization: A Technique for Temporization of Immediately Loaded Implants with Metal-Reinforced Acrylic Resin Restorations

Clinical outcome of submerged vs. non-submerged implants placed in fresh extraction sockets

CLINICAL ORAL IMPLANTS RESEARCH, Issue 12 2009
Luca Cordaro
Abstract Aim: The aim of this study was to compare the clinical outcome of submerged vs. non-submerged tapered implants placed into fresh extraction sockets. Materials and methods: A prospective, controlled, multicenter, randomized, clinical trial has been performed in two centers in Rome and Torino (Italy). Thirty healthy patients were recruited according to the following inclusion criteria: need for an immediate post extraction implant, ages between 18 and 70, horizontal defect depth <2 mm, smokers <10 cigarettes/day and absence of any circumstance or condition that could represent contraindications to implant surgery. The patients were randomly allocated to submerged or non-submerged treatment groups immediately after flap elevation and tooth extraction. Submerged implants were exposed 8 weeks after the first surgery; all implants were loaded with provisional restorations 12 weeks after the first surgery and with definitive restoration 12 weeks thereafter. Clinical and radiographic parameters were evaluated at baseline, at implant loading and at the 1-year follow-up visit. Results: The results showed statistically significant differences between the two groups in the mean value of keratinized tissue (KT) height after surgery that was significantly reduced for submerged implants when compared with transmucosal implants (mean reduction of KT at year follow-up: T group 0.2 mm, S group 1.3 mm; P=0.007). Conclusion: Similar outcomes were found for submerged and non-submerged implants placed in fresh extraction sockets with a horizontal peri-implant defect smaller than 2 mm, except for a reduction of KT in the submerged group. Either with a submerged or a non-submerged procedure, 1 mm of mean soft tissue recession is seen after 1 year when compared with the pre-extraction situation. [source]

Immediate non-occlusal vs. early loading of dental implants in partially edentulous patients: a multicentre randomized clinical trial.

CLINICAL ORAL IMPLANTS RESEARCH, Issue 6 2008
Peri-implant bone, soft-tissue levels
Abstract Objectives: To compare peri-implant bone and soft-tissue levels of immediately non-occlusally loaded vs. non-submerged early loaded implants in partially edentulous patients up to 14 months after placement. Material and methods: Fifty-two patients were randomized in five Italian private practices: 25 in the immediately loaded group and 27 in the early loaded group. To be immediately loaded, single implants had to be inserted with a torque of ,30 N cm, and splinted implants with a torque of ,20 N cm. Immediately loaded implants were provided with non-occluding temporary restorations within 48 h. After 2 months, the provisional restorations were placed in full occlusion. Implants were early loaded after 2 months. Final restorations were provided 8 months after placement. Blinded assessors evaluated peri-implant bone and soft-tissue levels. Results: Fifty-two implants were immediately loaded and 52 were early loaded. No drop-out occurred. One single immediately loaded implant failed 2 months after placement. Both groups gradually lost peri-implant bone in a highly statistically significant manner at 2, 8, and 14 months. After 14 months, patients of both groups lost an average of 1.1 mm of peri-implant bone. There were no statistically significant differences between the two loading strategies for peri-implant bone and soft-tissue level changes (P>0.05). After 14 months, the position of the soft tissues did not change significantly from baseline (delivery of the final restorations 8 months after placement). Conclusions: There were no statistically or clinically significant differences between immediate and early loading of dental implants with regard to peri-implant bone and soft-tissue levels as evaluated in the present study. [source]