Home About us Contact
|
Home About us Contact | ||
|
|
||
Polymer Conversion (polymer + conversion)
Selected AbstractsDendrimers as scaffolds for multifunctional reversible addition,fragmentation chain transfer agents: Syntheses and polymerizationJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 23 2004Xiaojuan Hao Abstract The synthesis and characterization of novel first- and second-generation true dendritic reversible addition,fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3-benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z-group architecture based on 1,1,1-hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free-radical polymerization at 60 °C. The novel dendrimer-based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number-average molecular weight (Mn) with the monomer,polymer conversion, yielding star polymers with molecular weights of up to Mn = 160,000 g mol,1 for PBA (based on a linear PBA calibration) and up to Mn = 70,000 g mol,1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1-hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star-shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star-shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877,5890, 2004 [source] Acrylonitrile-Butadiene Rubber (NBR) Prepared via Living/Controlled Radical Polymerization (RAFT)MACROMOLECULAR RAPID COMMUNICATIONS, Issue 18 2010Andreas Kaiser Abstract In the current work we present results on the controlled/living radical copolymerization of acrylonitrile (AN) and 1,3-butadiene (BD) via reversible addition fragmentation chain transfer (RAFT) polymerization techniques. For the first time, a solution polymerization process for the synthesis of nitrile butadiene rubber (NBR) via the use of dithioacetate and trithiocarbonate RAFT agents is described. It is demonstrated that the number average molar mass, , of the NBR can be varied between a few thousand and 60,000,g,·,mol,1 with polydispersities between 1.2 and 2.0 (depending on the monomer to polymer conversion). Excellent agreement between the experimentally observed and the theoretically expected molar masses is found. Detailed information on the structure of the synthesized polymers is obtained by variable analytical techniques such as infrared spectroscopy (IR), nuclear magnetic resonance (NMR) spectroscopy, differential scanning calorimetry, and electrospray ionization-mass spectrometry (ESI-MS). [source] Frontal polymerization of acrylic monomers for the consolidation of stonePOLYMERS FOR ADVANCED TECHNOLOGIES, Issue 4 2005Silvia Vicini Abstract Polymeric products are largely used for consolidation of stone in the field of cultural heritage. Nevertheless, the main problem of polymeric compounds is related to their macromolecular nature, it being difficult for a polymer to penetrate inside the pores which may have a very small diameter. These considerations are the starting points for in situ polymerization. According to this technique, not the pre-formed polymer, but the monomer is introduced into the stone and it is polymerized in situ in a subsequent step. Frontal polymerization (FP) is a particular technique in which the heat released by the exothermal reaction of monomer to polymer conversion is exploited to promote the formation of a hot traveling front able to propagate and self-sustain the reaction. In the present work, FP is performed inside the pores of the stone and the results lead to the conclusion that the hot front is still active in the presence of an inorganic material which dissipates partially the heat released during the polymerization. In addition some recent applications of FP are discussed in comparison with the traditional polymerization for the in situ consolidation and protection of stones. Copyright © 2005 John Wiley & Sons, Ltd. [source] Synthesis of comb polymers via grafting-onto macromolecules bearing pendant diene groups via the hetero-Diels-Alder-RAFT click conceptJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 8 2010Antoine Bousquet Abstract Comb polymers were synthesized by the "grafting-onto" method via a combination of Reversible Addition-Fragmentation Chain Transfer (RAFT) polymerization and the hetero-Diels-Alder (HDA) cycloaddition. The HDA reactive monomer trans, trans-hexa-2,4-dienylacrylate (ttHA) was copolymerized with styrene via the RAFT process. Crosslinking was minimized by decreasing the monomer concentration,whilst keeping monomer to polymer conversions low,resulting in reactive backbones with on average one reactive pendant diene groups for 10 styrene units. The HDA cycloaddition was performed between the diene functions of the copolymer and a poly(n -butyl acrylate) (PnBA) prepared via RAFT polymerization with pyridin-2-yldithioformate, which can act as a dienophile. The coupling reactions were performed within 24 h at 50 °C and the grafting yield varies from 75% to 100%, depending on the number average molecular weight of the PnBA (3500 g mol,1 < Mn < 13,000 g mol,1) grafted chain and the reaction stoichiometry. The molecular weights of the grafted block copolymers range from 19,000 g mol,1 to 58,000 g mol,1 with polydispersities close to 1.25. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1773,1781, 2010 [source] The kinetics of enhanced spin capturing polymerization: Influence of the nitrone structureJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 4 2009Edgar H. H. Wong Abstract Several nitrones and one nitroso compound have been evaluated for their ability to control the molecular weight of polystyrene via the recently introduced radical polymerization method of enhanced spin capturing polymerization (ESCP). In this technique, molecular weight control is achieved (at ambient or slightly elevated temperatures) via the reaction of a growing radical chain with a nitrone forming a macronitroxide. These nitroxides subsequently react rapidly and irreversibly with propagating macroradicals forming polymer of a certain chain length, which depends on the nitrone concentration in the system. Via evaluation of the resulting number-average molecular weight, Mn, at low conversions, the addition rate coefficient of the growing radicals onto the different nitrones is determined and activation energies are obtained. For the nitrones N - tert -butyl-,-phenylnitrone (PBN), N -methyl-,-phenylnitrone (PMN), and N -methyl-,-(4-bromo-phenyl) nitrone (pB-PMN), addition rate coefficients, kad,macro, in a similar magnitude to the styrene propagation rate coefficient, kp, are found with spin capturing constants CSC (with CSC = kad,macro/kp) ranging from 1 to 13 depending on the nitrone and on temperature. Activation energies between 23.6 and 27.7 kJ mol,1 were deduced for kad,macro, congruent with a decreasing CSC with increasing temperature. Almost constant Mn over up to high monomer to polymer conversions is found when CSC is close to unity, while increasing molecular weights can be observed when the CSC is large. From temperatures of 100 °C onward, reversible cleavage of the alkoxyamine group can occur, superimposing a reversible activation/deactivation mechanism onto the ESCP system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1098,1107, 2009 [source] | ||||||||||