Home About us Contact
|
Home About us Contact | ||
|
|
||
PVC Compounds (pvc + compound)
Selected AbstractsA brief overview of theories of PVC plasticization and methods used to evaluate PVC-plasticizer interaction,JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, Issue 4 2009Paul H. Daniels This paper reviews the most widely used models for explaining how plasticizers render PVC flexible. These models include the gel, lubricity, and free volume theories; kinetic theories; and mathematical models which predict on the basis of plasticizer structure how much a plasticizer will lower the polymer glass transition in a flexible PVC compound. Since plasticization results from interactions between plasticizer and polymer, methods which have been used to study either the strength or the permanence (or both) of those interactions are also briefly discussed. Tools which have often been used to study plasticizer-PVC interactions include infrared and nuclear magnetic resonance spectroscopy, compression and humid-aging tests, dynamic mechanical analysis, torque rheometer tests, plasticizer-resin clear point temperature measurements, plastisol gelation/fusion by hot stage measurements, and others. J. VINYL ADDIT. TECHNOL., 2009. © 2009 Society of Plastics Engineers [source] Metallic oxides as fire retardants and smoke suppressants in flexible poly(vinyl chloride)JOURNAL OF APPLIED POLYMER SCIENCE, Issue 5 2010Antonio Rodolfo Jr. Abstract Combustion and smoke emission properties of PVC compounds, modified with copper (II), molybdenum, and zinc oxides, were studied using cone calorimeter, limiting oxygen index (LOI) and thermogravimetry coupled with mass spectrometry (TG/MS). Results showed that the metal oxides have a very significant effect on the combustion and smoke suppression properties of the PVC compounds. The results also confirmed the anticipation mechanisms of the dehydrochlorination reactions, reductive coupling, and elimination of benzene resulting from the presence of copper (II), molybdenum, and zinc, indicated by the increasing content of postcombustion char residue and the significant reduction in benzene production, indicated by the MS measurements performed. The results also provide indications that the combination of the copper (II) and molybdenum oxides is the one with the best balance of combustion properties, as it reduced the heat released and promoted the suppression of smoke more efficiently. The formulations containing ZnO, because of their strong Lewis acid character, indicated a less pronounced reduction of smoke released during the combustion process, when compared with copper (II) and molybdenum oxides. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Rigid PVC/(layered silicate) nanocomposites produced through a novel melt-blending approach,JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, Issue 2 2009Laurent M. Matuana On the basis of the fusion behavior of poly(vinyl chloride) (PVC), the influence of compounding route on the properties of PVC/(layered silicate) nanocomposites was studied. Four different compounding addition sequences were examined during the melt compounding of PVC with montmorillonite (MMT) clay, including (a) a direct dry mixing of PVC and nanoclay, (b) an addition of nanoclay at compaction, (c) an addition of nanoclay at the onset of fusion, and (d) an addition of nanoclay at equilibrium torque. Both unmodified sodium montmorillonite (Na+ -MMT) and organically modified montmorillonite (Org.-MMT) clays were used, and the effect of the addition sequence of the clay during compounding on its dispersion in the matrix was evaluated by X-ray diffraction and transmission electron miscroscopy. The surface color change, dynamic mechanical analysis, and flexural and tensile properties of PVC/clay nanocomposites were also studied. The experimental results indicated that both the extent of property improvement and the dispersion of nanoparticles in PVC/(layered silicate) nanocomposites are strongly influenced by the degree of gelation achieved in PVC compounds during processing. The addition of nanoclay to PVC must be accomplished at the onset of fusion, when PVC particles are reduced in size, in order to produce nanocomposites with better nanodispersion and enhanced mechanical properties. Overall, rigid PVC nanocomposites with unmodified clay (Na+ -MMT) were more thermally stable and exhibited better mechanical properties than their counterparts with organically modified clay (Org.-MMT). J. VINYL ADDIT. TECHNOL., 2009. © 2009 Society of Plastics Engineers [source] Stepwise fatigue crack propagation in poly(vinyl chloride)JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, Issue 1 2004T. E. Berna-Lara The kinetics and mechanism of fatigue crack growth in poly(vinyl chloride) (PVC) compounds of different molecular weight were studied. The fatigue crack propagation rate of all the PVC compounds followed the Paris law: da/dt = Af ,K. Fatigue crack propagation rate, as reflected by the pre-factor Af in the Paris law, was highly dependent on molecular weight of the resin, strain rate, and temperature. A stepwise mechanism of fatigue crack propagation was observed in all the PVC compounds. Steps were formed by discontinuous growth of the crack through a single craze in the shape of a narrow strip. Step length and lifetime were used to characterize fatigue crack propagation. J. Vinyl Addit. Technol. 10:5,10, 2004. © 2004 Society of Plastics Engineers. [source] Quasi-brittle to ductile transition in impact-modified PVCJOURNAL OF VINYL & ADDITIVE TECHNOLOGY, Issue 1 2004J. Yu The toughness of impact-modified poly(vinyl chloride) (PVC) compounds was examined by using a modified Charpy test. Increasing impact speed resulted in a quasi-brittle to ductile transition in all PVC compounds. In the quasi-brittle region, a PVC of 56,000 Mw fractured through a craze-like damage zone that could be described by a modified Dugdale model. Furthermore, the same molecular-weight PVC modified with either 10 pph (parts per hundred parts by weight) of chlorinated polyethylene (CPE) or 10 pph of methylmethacrylate-butadiene-styrene (MBS) impact modifier also conformed to the Dugdale model with the craze-like damage zone. The CPE effectively improved the impact performance of PVC by shifting the quasi-brittle to ductile transition to a higher loading rate. Compared to CPE, MBS was a better impact modifier, and its use resulted in a higher quasi-brittle to ductile transition loading rate in the same PVC matrix. Fracture initiation toughness of all the materials was described by the Hayes-Williams modification of the Dugdale model. The intrinsic brittle fracture energy obtained by extrapolation to zero craze length was determined only by the PVC matrix and was independent of the impact modifier. However, the kinetics of craze growth, and hence the response to rapid loading, depended on the impact modifier. Increasing the molecular weight of the PVC resin resulted in a more complex damage zone that was not amendable to the Dugdale analysis. J. Vinyl Addit. Technol. 10:11,16, 2004. © 2004 Society of Plastics Engineers. [source] | ||||||||||