Molecular Order (molecular + order)

Distribution by Scientific Domains


Selected Abstracts


Influence of Molecular Order on the Local Work Function of Nanographene Architectures: A Kelvin-Probe Force Microscopy Study

CHEMPHYSCHEM, Issue 11 2005
Vincenzo Palermo Dr.
Abstract We report a Kelvin-probe force microscopy (KPFM) investigation on the structural and electronic properties of different submicron-scale supramolecular architectures of a synthetic nanographene, including extended layers, percolated networks and broken patterns grown from solutions at surfaces. This study made it possible to determine the local work function (WF) of the different , -conjugated nanostructures adsorbed on mica with a resolution below 10 nm and 0.05 eV. It revealed that the WF strongly depends on the local molecular order at the surface, in particular on the delocalization of electrons in the , -states, on the molecular orientation at surfaces, on the molecular packing density, on the presence of defects in the film and on the different conformations of the aliphatic peripheral chains that might cover the conjugated core. These results were confirmed by comparing the KPFM-estimated local WF of layers supported on mica, where the molecules are preferentially packed edge-on on the substrate, with the ultraviolet photoelectron spectroscopy microscopically measured WF of layers adsorbed on graphite, where the molecules should tend to assemble face-on at the surface. It appears that local WF studies are of paramount importance for understanding the electronic properties of active organic nanostructures, being therefore fundamental for the building of high-performance organic electronic devices, including field-effect transistors, light-emitting diodes and solar cells. [source]


Thermal Behavior of Tetrahydropyran-Intercalated VOPO4: Structural and Dynamics Study

EUROPEAN JOURNAL OF INORGANIC CHEMISTRY, Issue 3 2007
Klára Melánová
Abstract The thermal behavior of tetrahydropyran-(THP-)intercalated VOPO4 was probed by an extensive combination of experimental methods (XRD, DSC, FTIR, solid-state NMR) and quantum chemical calculations. Two temperature-induced transitions were detected and all polymorphs exhibit a high degree of molecular order and tight packing of THP in VOPO4. The first reversible thermal transition at around 100 °C was attributed to boat/chair conformation changes of the THP molecules. Most probably, a low-temperature boat conformation of the guest molecules present in the interlayer space of VOPO4 changes to a high-temperature chair conformation. This rearrangement of the THP molecules was confirmed by variable-temperature 13C CP/MAS NMR spectroscopy. Quantum chemical calculations using a B3LYP functional and 6-31G(d) basis set also support this idea. The second change at around 140 °C is probably caused by a weakening of the donor,acceptor bond between the oxygen molecule of THP and the vanadium atom of the host and the formation of a disorder in packing of the THP molecules. (© Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2007) [source]


Imbalance of plasma membrane ion leak and pump relationship as a new aetiological basis of certain disease states

JOURNAL OF INTERNAL MEDICINE, Issue 6 2003
G. Ronquist
Abstract. The basis for life is the ability of the cell to maintain ion gradients across biological membranes. Such gradients are created by specific membrane-bound ion pumps [adenosine triphosphatases (ATPases)]. According to physicochemical rules passive forces equilibrate (dissipate) ion gradients. The cholesterol/phospholipid ratio of the membrane and the degree of saturation of phospholipid fatty acids are important factors for membrane molecular order and herewith a determinant of the degree of non-specific membrane leakiness. Other operative principles, i.e. specific ion channels can be opened and closed according to mechanisms that are specific to the cell. Certain compounds called ionophores can be integrated in the plasma membrane and permit specific inorganic ions to pass. Irrespective of which mechanism ions leak across the plasma membrane the homeostasis may be kept by increasing ion pumping (ATPase activity) in an attempt to restore the physiological ion gradient. The energy source for this work seems to be glycolytically derived ATP formation. Thus an increase in ion pumping is reflected by increased ATP hydrolysis and rate of glycolysis. This can be measured as an accumulation of breakdown products of ATP and end-products of anaerobic glycolysis (lactate). In certain disease entities, the balance between ATP formation and ion pumping may be disordered resulting in a decrease in inter alia (i.a.) cellular energy charge, and an increase in lactate formation and catabolites of adenylates. Cardiac syndrome X is proposed to be due to an excessive leakage of potassium ions, leading to electrocardiographic (ECG) changes, abnormal Tl-scintigraphy of the heart and anginal pain (induced by adenosine). Cocksackie B3 infections, a common agent in myocarditis might also induce an ionophore-like effect. Moreover, Alzheimer's disease is characterized by the formation of extracellular amyloid deposits in the brain of patients. Perturbation of cellular membranes by the amyloid peptide during the development of Alzheimer's disease is one of several mechanisms proposed to account for the toxicity of this peptide on neuronal membranes. We have studied the effects of the peptide and fragments thereof on 45Ca2+ -uptake in human erythrocytes and the energetic consequences. Treatment of erythrocytes with the ,1,40 peptide, results in qualitatively similar nucleotide pattern and decrease of energy charge as the treatment with Ca2+ -ionophore A23187. Finally, in recent studies we have revealed and published in this journal that a rare condition, Tarui's disease or glycogenosis type VII, primarily associated with a defect M-subunit of phosphofructokinase, demonstrates as a cophenomenon an increased leak of Ca2+ into erythrocytes. [source]


Nanoscale Structural and Electronic Properties of Ultrathin Blends of Two Polyaromatic Molecules: A Kelvin Probe Force Microscopy Investigation

CHEMPHYSCHEM, Issue 4 2006
Vincenzo Palermo Dr.
Abstract We describe a Kelvin Probe Force Microscopy (KPFM) study on the morphological and electronic properties of complex mono and bi-molecular ultrathin films self-assembled on mica. These architectures are made up from an electron-donor (D), a synthetic all-benzenoid polycyclic aromatic hydrocarbon, and an electron-acceptor (A), perylene-bis-dicarboximide. The former molecule self-assembles into fibers in single component films, while the latter molecule forms discontinuous layers. Taking advantage of the different solubility and self-organizing properties of the A and D molecules, multicomponent ultrathin films characterized by nanoscale phase segregated fibers of D embedded in a discontinuous layer of A are formed. The direct estimation of the surface potential, and consequently the local workfunction from KPFM images allow a comparison of the local electronic properties of the blend with those of the monocomponent films. A change in the average workfunction values of the A and D nanostructures in the blend occurs which is primarily caused by the intimate contact between the two components and the molecular order within the nanostructure self-assembled at the surface. Additional roles can be ascribed to the molecular packing density, to the presence of defects in the film, to the different conformation of the aliphatic peripheral chains that might cover the conjugated core and to the long-range nature of the electrostatic interactions employed to map the surface by KPFM limiting the spatial and potential resolution. The local workfunction studies of heterojunctions can be of help to tune the electronic properties of active multicomponent films, which is crucial for the fabrication of efficient organic electronic devices as solar cells. [source]


Influence of Molecular Order on the Local Work Function of Nanographene Architectures: A Kelvin-Probe Force Microscopy Study

CHEMPHYSCHEM, Issue 11 2005
Vincenzo Palermo Dr.
Abstract We report a Kelvin-probe force microscopy (KPFM) investigation on the structural and electronic properties of different submicron-scale supramolecular architectures of a synthetic nanographene, including extended layers, percolated networks and broken patterns grown from solutions at surfaces. This study made it possible to determine the local work function (WF) of the different , -conjugated nanostructures adsorbed on mica with a resolution below 10 nm and 0.05 eV. It revealed that the WF strongly depends on the local molecular order at the surface, in particular on the delocalization of electrons in the , -states, on the molecular orientation at surfaces, on the molecular packing density, on the presence of defects in the film and on the different conformations of the aliphatic peripheral chains that might cover the conjugated core. These results were confirmed by comparing the KPFM-estimated local WF of layers supported on mica, where the molecules are preferentially packed edge-on on the substrate, with the ultraviolet photoelectron spectroscopy microscopically measured WF of layers adsorbed on graphite, where the molecules should tend to assemble face-on at the surface. It appears that local WF studies are of paramount importance for understanding the electronic properties of active organic nanostructures, being therefore fundamental for the building of high-performance organic electronic devices, including field-effect transistors, light-emitting diodes and solar cells. [source]