Home About us Contact
|
Home About us Contact | ||
|
|
||
Molecular Imprinting (molecular + imprinting)
Selected AbstractsSensitive Biomimetic Sensor Based on Molecular Imprinting at Functionalized Indium Tin Oxide ElectrodesELECTROANALYSIS, Issue 16 2007Na Gao Abstract We initially report an electrochemical sensing platform based on molecularly imprinted polymers (MIPs) at functionalized Indium Tin Oxide Electrodes (ITO). In this research, aminopropyl-derivatized organosilane aminopropyltriethoxysilane (APTES), which plays the role of functional monomers for template recognition, was firstly self-assembled on an ITO electrode and then dopamine-imprinted sol was spin-coated on the modified surface. APTES which can interact with template dopamine (DA) through hydrogen bonds brought more binding sites located closely to the surface of the ITO electrode, thus made the prepared sensor more sensitive for DA detection. Potential scanning is presented to extract DA from the modified film, thus DA can rapidly and completely leach out. The affinity and selectivity of the resulting biomimetic sensor were characterized using cyclic voltammetry (CV). It exhibited an increased affinity for DA over that of structurally related molecules, the anodic current for DA oxidation depended on the concentration of DA in the linear range from 2×10,6 M to 0.8×10,3 M with a correlation coefficient of 0.9927. In contrast, DA-templated film prepared under identical conditions on a bare ITO showed obviously lower response toward dopamine in solution. It should be noted that potential scanning is a very effective approach for DA extraction, and surface modification of the electrochemical transducer with functional monomers is responsible for the development of MIPs-based highly sensitive biomimetic sensor. [source] From 3D to 2D: A Review of the Molecular Imprinting of ProteinsBIOTECHNOLOGY PROGRESS, Issue 6 2006Nicholas W. Turner Molecular imprinting is a generic technology that allows for the introduction of sites of specific molecular affinity into otherwise homogeneous polymeric matrices. Commonly this technique has been shown to be effective when targeting small molecules of molecular weight <1500, while extending the technique to larger molecules such as proteins has proven difficult. A number of key inherent problems in protein imprinting have been identified, including permanent entrapment, poor mass transfer, denaturation, and heterogeneity in binding pocket affinity, which have been addressed using a variety of approaches. This review focuses on protein imprinting in its various forms, ranging from conventional bulk techniques to novel thin film and monolayer surface imprinting approaches. [source] ChemInform Abstract: Synthesis of Heterogeneous Palladium Catalyst Assemblies by Molecular Imprinting.CHEMINFORM, Issue 16 2002Andrew N. Cammidge Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a "Full Text" option. The original article is trackable via the "References" option. [source] Mimicking biological delivery through feedback-controlled drug release systems based on molecular imprintingAICHE JOURNAL, Issue 6 2009David R. Kryscio Intelligent drug delivery systems (DDS) are able to rapidly detect a biological event and respond appropriately by releasing a therapeutic agent; thus, they are advantageous over their conventional counterparts. Molecular imprinting is a promising area that generates a polymeric network which can selectively recognize a desired analyte. This field has been studied for a variety of applications over a long period of time, but only recently has it been investigated for biomedical and pharmaceutical applications. Recent work in the area of molecularly imprinted polymers in drug delivery highlights the potential of these recognitive networks as environmentally responsive DDS that can ultimately lead to feedback controlled recognitive release systems. © 2009 American Institute of Chemical Engineers AIChE J, 2009. [source] Molecular imprinting of AMP by an ionic-noncovalent dual approachJOURNAL OF SEPARATION SCIENCE, JSS, Issue 19 2009Florent Breton Abstract In order to mimic recognition properties of adenylate kinase, molecularly imprinted polymers (MIPs) were prepared for adenosine 5,-monophosphate (AMP), a substrate of the enzyme. Different functional monomers interacting with the phosphate moiety were tested, and the MIP giving the best specific binding of AMP was composed with one equivalent of 2-(dimethylamino)ethyl methacrylate and ten equivalents of acrylamide compared to AMP. Packed into solid phase cartridge, this polymer showed similar characteristics than the enzyme, since it was specific for AMP toward other nucleotides. [source] From 3D to 2D: A Review of the Molecular Imprinting of ProteinsBIOTECHNOLOGY PROGRESS, Issue 6 2006Nicholas W. Turner Molecular imprinting is a generic technology that allows for the introduction of sites of specific molecular affinity into otherwise homogeneous polymeric matrices. Commonly this technique has been shown to be effective when targeting small molecules of molecular weight <1500, while extending the technique to larger molecules such as proteins has proven difficult. A number of key inherent problems in protein imprinting have been identified, including permanent entrapment, poor mass transfer, denaturation, and heterogeneity in binding pocket affinity, which have been addressed using a variety of approaches. This review focuses on protein imprinting in its various forms, ranging from conventional bulk techniques to novel thin film and monolayer surface imprinting approaches. [source] Molecularly imprinted polymers as a tool for separation in CECELECTROPHORESIS, Issue 1-2 2007Zhao-Sheng Liu Dr. Abstract Molecularly imprinted polymers (MIPs) are synthesized in the presence of a template which results in the formation of specific recognition cavities complementary to the template in shape and chemical functionality. One of the most successful application areas of MIPs is chromatographic sorbents, which are tailor-made synthetic polymers for a given analyte. However, low efficiency of MIP columns is often observed because of slow kinetics of the template. CEC-based MIPs are thought to improve efficiency of MIP-based separation due to the enhanced flow dynamics of CEC. Another attractive feature is the miniaturized format of CEC, so that fewer templates or monomers for the molecular imprinting are consumed, a characteristic desired for ,green chemistry'. The small dimensions of a capillary demand the development of novel polymer formats that can be applied to a miniaturized system. This review discusses the various formats, i.e., the micro- or nanoparticle, the coating and the monolith, for application in CEC as well as the use in MIP syntheses and characteristics. [source] Novel bioactive scaffolds with fibronectin recognition nanosites based on molecular imprinting technologyJOURNAL OF APPLIED POLYMER SCIENCE, Issue 6 2010Elisabetta Rosellini Abstract Biomimetic materials for application in the field of tissue engineering are usually obtained through covalent bonding between the polymer backbone and the bioactive molecules. A totally new approach, proposed for the first time by our research group, for the creation of advanced synthetic support structures for cell adhesion and proliferation is represented by molecular imprinting (MI) technology. In this article, we describe the synthesis and characterization of molecularly imprinted polymers with recognition properties toward a fibronectin peptide sequence and their application as functionalization structures. Polymers, in the form of densely fused microgel particles, were obtained by precipitation polymerization. The imprinted particles showed good performance in terms of recognition capacity and quantitative rebinding; moreover, the epitope effect was observed, with the particles able to recognize and rebind not only the specific peptide sequence but also a larger fibronectin fragment. The cytotoxicity tests showed normal vitality in C2C12 myoblasts cultured in a medium that was put in contact with the imprinted particles. Therefore, imprinted particles were used to functionalize synthetic polymeric films by deposition on their surface. The deposition of the imprinted particles did not alter their specific recognition and rebinding behavior. The most remarkable result was obtained by the biological characterization: in fact, the functionalized materials appeared able to promote cell adhesion and proliferation. These results are very promising and suggest that MI can be used as an innovative functionalization technique to prepare bioactive scaffolds with an effective capacity for improving tissue regeneration. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Enhancing therapeutic loading and delaying transport via molecular imprinting and living/controlled polymerizationAICHE JOURNAL, Issue 1 2010Asa D. Vaughan Abstract This work demonstrates for the first time molecular imprinting using a "living/controlled" polymerization (LCP) strategy to enhance template loading/affinity and delay release in weakly crosslinked gels. Two gel systems were studied: poly(DEAEM- co -HEMA- co -PEG200DMA) gels imprinted for diclofenac sodium and poly(MAA- co -EGDMA) gels imprinted for ethyl adenine-9-acetate. Experimental evidence confirms that template diffusion coefficients within imprinted gels can be heavily influenced by template binding affinity. Recognition studies revealed significant increases in template loading/affinity with large increases in loading for LCP, and dynamic template release studies showed that imprinting via LCP extends the template release profile by twofold over that of imprinting via conventional free-radical polymerization techniques and fourfold over the control network (less Fickian and toward zero-order release with a profile coefficient of 0.70). Analysis of reaction kinetics indicated that LCP with reversible termination events increases the chemically controlled chain propagation mechanism, and that binding sites are formed during this phase of the polymerization. © 2009 American Institute of Chemical Engineers AIChE J, 2010 [source] Mimicking biological delivery through feedback-controlled drug release systems based on molecular imprintingAICHE JOURNAL, Issue 6 2009David R. Kryscio Intelligent drug delivery systems (DDS) are able to rapidly detect a biological event and respond appropriately by releasing a therapeutic agent; thus, they are advantageous over their conventional counterparts. Molecular imprinting is a promising area that generates a polymeric network which can selectively recognize a desired analyte. This field has been studied for a variety of applications over a long period of time, but only recently has it been investigated for biomedical and pharmaceutical applications. Recent work in the area of molecularly imprinted polymers in drug delivery highlights the potential of these recognitive networks as environmentally responsive DDS that can ultimately lead to feedback controlled recognitive release systems. © 2009 American Institute of Chemical Engineers AIChE J, 2009. [source] Probing the limits of molecular imprinting: strategies with a template of limited size and functionalityJOURNAL OF MOLECULAR RECOGNITION, Issue 1 2009Miruna Petcu Abstract A series of polymers molecularly imprinted with the general anaesthetic propofol were synthesized using both semi- and non-covalent approaches. The polymers were evaluated with respect to template rebinding in both aqueous and organic media. In aqueous media, the observed propofol binding in these polymer systems was largely hydrophobic and non-specific in nature. In non-polar solvents such as hexane, electrostatic (hydrogen bonding) interactions dominate resulting in some selectivity. The implication of these results, in conjunction with those obtained using structures of similar size in other studies, is that propofol, a template possessing limited functionality and size, appears to define the lower limit for template size and degree of functionalization that can be used for the creation of ligand-selective recognition sites in molecularly imprinted polymers. Furthermore, studies with alternative ligands indicate that the steric crowding of a ligand's functionality to the polymer contributes to the extent of polymer,ligand recognition. Copyright © 2008 John Wiley & Sons, Ltd. [source] Non-covalent molecular imprinting with emphasis on its application in separation and drug development,JOURNAL OF MOLECULAR RECOGNITION, Issue 4 2006Huiqi Zhang Abstract The molecular imprinting technique can be defined as the formation of specific nano-sized cavities by means of template-directed synthesis. The resulting molecularly imprinted polymers (MIPs), which often have an affinity and a selectivity approaching those of antibody-antigen systems, have thus been coined "artificial antibodies." MIPs are characterized by their high specificity, ease of preparation, and their thermal and chemical stability. They have been widely studied in connection with many potential applications, including their use for separation and isolation purposes, as antibody mimics (biomimetic assays and sensors), as enzyme mimics, in organic synthesis, and in drug delivery. The non-covalent imprinting approach, developed mainly in Lund, has proven to be more versatile than the alternative covalent approach because of its preparation being less complicated and of the broad selection of functional monomers and possible target molecules that are available. The paper presents a review of studies of this versatile technique in the areas of separation and drug development, with emphasis being placed on work carried out in our laboratory. Copyright © 2006 John Wiley & Sons, Ltd. [source] Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003JOURNAL OF MOLECULAR RECOGNITION, Issue 2 2006Cameron Alexander Abstract Over 1450 references to original papers, reviews and monographs have herein been collected to document the development of molecular imprinting science and technology from the serendipitous discovery of Polyakov in 1931 to recent attempts to implement and understand the principles underlying the technique and its use in a range of application areas. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by papers dealing with fundamental aspects of molecular imprinting and the development of novel polymer formats. Thereafter, literature describing attempts to apply these polymeric materials to a range of application areas is presented. Copyright © 2006 John Wiley & Sons, Ltd. [source] One-pot synthesis of surface-functionalized molecularly imprinted polymer microspheres by iniferter-induced "living" radical precipitation polymerizationJOURNAL OF POLYMER SCIENCE (IN TWO SECTIONS), Issue 15 2010Junyi Li Abstract This article describes for the first time the development of a new polymerization technique by introducing iniferter-induced "living" radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter-induced "living" radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4-dichlorophenoxyacetic acid (2,4-D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant Ka and apparent maximum number Nmax for the high-affinity sites of the 2,4-D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 104 M,1 and 4.37 ,mol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2-chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one-pot synthesis of functional polymer/MIP microspheres with surface-bound iniferter groups, which allows their direct controlled surface modification via surface-initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217,3228, 2010 [source] Cupric ion enhanced molecular imprinting of bovine serum albumin in hydrogelJOURNAL OF SEPARATION SCIENCE, JSS, Issue 19 2009Sheng-Hua Li Abstract A novel molecularly imprinted hydrogel for bovine serum albumin (BSA) was prepared using cupric ion as the bridge between the template BSA and the functional monomer 4-vinylpyridine. N-Isopropylacrylamide (NIPA) was used as an assistant monomer to provide the stimuli-responsibility of the polymer. The adsorption conditions of BSA on the BSA-Cu(II)-imprinted hydrogel were optimized considering the influences of pH, temperature, and salt concentration. The proteins bound on the imprinted hydrogel can be easily recovered under mild conditions by using 10 mmol/L ethylene diamine tetraacetic acid (EDTA) (pH 7.0) containing 150 mmol/L NaCl as the eluting solution. The imprinting effect and adsorption capacity of the polymer were found to be significantly improved compared to the hydrogel prepared in the absence of cupric ion. The results demonstrated the advantages of using a template-metal ion-monomer coordination system to strengthen the interaction between the protein and monomer. The effects of different metals ions including Zn(II), Ni(II), Co(II), Cd(II), and Al(III) on the recognition ability of the BSA-Cu(II)-imprinted hydrogel were also investigated. The polymer showed high selectivity toward both the template protein and the cupric ion. [source] Networks for recognition of biomolecules: molecular imprinting and micropatterning poly(ethylene glycol)- Containing films,POLYMERS FOR ADVANCED TECHNOLOGIES, Issue 10-12 2002Mark E. Byrne Abstract Engineering the molecular design of biomaterials by controlling recognition and specificity is the first step in coordinating and duplicating complex biological and physiological processes. Studies of protein binding domains reveal molecular architectures with specific chemical moieties that provide a framework for selective recognition of target biomolecules in aqueous environment. By matching functionality and positioning of chemical residues, we have been successful in designing biomimetic polymer networks that specifically bind biomolecules in aqueous environments. Our work addresses the preparation, behavior, and dynamics of the three-dimensional structure of biomimetic polymers for selective recognition via non-covalent complexation. In particular, the synthesis and characterization of recognitive gels for the macromolecular recognition of D -glucose is highlighted. Novel copolymer networks containing poly(ethylene glycol) (PEG) and functional monomers such as acrylic acid, 2-hydroxyethyl methacrylate, and acrylamide were synthesized in dimethyl sulfoxide (polar, aprotic solvent) and water (polar, protic solvent) via UV-free radical polymerization. Polymers were characterized by single and competitive equilibrium and kinetic binding studies, single and competitive fluorescent and confocal microscopy studies, dynamic network swelling studies, and ATR-FTIR. Results qualitatively and quantitatively demonstrate effective glucose-binding polymers in aqueous solvent. Owing to the presence of template, the imprinting process resulted in a more macroporous structure as exhibited by dynamic swelling experiments and confocal microscopy. Polymerization kinetic studies suggest that the template molecule has more than a dilution effect on the polymerization, and the effect of the template is related strongly to the rate of propagation. In addition, PEG containing networks were micropatterned to fabricate microstructures, which would be the basis for micro-diagnostic and tissue engineering devices. Utilizing photolithography techniques, polymer micropatterns of a variety of shapes and dimensions have been created on polymer and silicon substrates using UV free-radical polymerizations with strict spatial control. Micropatterns were characterized using optical microscopy, SEM, and profilometry. The processes and analytical techniques presented are applicable to other stimuli-sensitive and recognitive networks for biomolecules, in which hydrogen bonding, hydrophobic, or ionic contributions will direct recognition. Further developments are expected to have direct impact on applications such as analyte controlled and modulated drug and protein delivery, drug and biological elimination, drug targeting, tissue engineering, and micro- or nano-devices. This work is supported by NSF Grant DGE-99-72770. Copyright © 2003 John Wiley & Sons, Ltd. [source] | ||||||||||||||||