Home About us Contact
|
Home About us Contact | ||
|
|
||
Matrix Type (matrix + type)
Selected AbstractsInfluence of Matrix Type on Surface Roughness of Three Resins for Provisional Crowns and Fixed Partial DenturesJOURNAL OF PROSTHODONTICS, Issue 2 2009Raul Ayuso-Montero DDS Abstract Purpose: This study evaluated the effect of matrix type on the surface roughness of resins for provisional crowns and fixed partial dentures. Materials and Methods: Ninety specimens of two acrylic resins (Trim II, Tab2000) and one bis-acryl composite (Protemp II Garant) were fabricated using one of three matrices: irreversible hydrocolloid (Cavex CA37), poly(vinyl siloxane) (Aquasil) or vacuum-formed matrix (Bio-flow Hard). The sample size for each resin-matrix combination was 10. The vestibular face of one natural maxillary central incisor was used as a model to fabricate all the specimens, following the custom fabrication technique. The average roughness measurements, Ra (,m), were obtained using a profilometer, and the data were analyzed using Kruskal-Wallis and Mann-Whitney U- tests. The results were contrasted against the surface roughness of the tooth using a one-sample t- test. Results: Aquasil and vacuum-formed matrix had a smoother surface than Cavex CA37 regardless of the resin tested (p < 0.05). Protemp II Garant had the smoothest surface regardless of the matrix used, with no significant differences when polymerized against the three different matrices. Trim II polymerized against Cavex CA37 had a rougher (p < 0.05) surface than Aquasil or vacuum-formed matrix. Tab2000 had the smoothest surface (p < 0.05) when polymerized against a vacuum-formed matrix. Conclusions: There is no universal matrix that produces the smoothest surface: this depends on the compatibility between the resin and the matrix. Protemp II Garant polymerized against Cavex CA37 matrix yields a surface that is smooth enough not to require polishing unless this surface is adjusted. [source] Persistence and degradation of maize-expressed vaccine protein, Escherichia coli heat-labile enterotoxin subunit B, in soil and water,ENVIRONMENTAL TOXICOLOGY & CHEMISTRY, Issue 6 2008Hirofumi Kosaki Abstract Transgenic plants represent an innovative platform for the cost-effective large-scale production of various pharmaceutical proteins. The eventual open-field production of plant-made pharmaceuticals (PMPs) requires risk assessment to determine the potential for harm to the surrounding ecosystem. In the present study, the environmental persistence of a transgenic maize-expressed antigen, Escherichia coli heat-labile enterotoxin subunit B (LTB), was studied under laboratory conditions. To semiquantitatively monitor the persistence of LTB in soil, extraction with a high-salt, high-pH extraction buffer was optimized using the closely homologous Vibrio cholerae enterotoxin subunit B (CTB) as a test substance. The time to dissipation of 50% (DT50) of the extractable fraction of maize-expressed LTB was 4 to 15 d in pond water and 35 to 90 d in soils. Both extraction efficacy and persistence were strongly affected by the matrix type and incubation conditions. In contrast with maize-expressed LTB, the DT50 for bacterially produced LTB and CTB was less than 4 d both in pond water and soil. Although maize-expressed LTB was more stable than bacterially produced analogue, its dissipation was governed by an initial lag, which could be attributed to release from the plant material, followed by rapid decline. [source] The effect of aging on distraction osteogenesis in the ratJOURNAL OF ORTHOPAEDIC RESEARCH, Issue 3 2001J. Aronson The effect of age on bone formation in the limb lengthening model of distraction osteogenesis (DO) was investigated in two studies using Sprague,Dawley (SD) rats from two colonies at various ages (CAMM: 9 vs 24 months, Harlan: 4 vs 24 months). External fixators were placed on the right tibiae of 30 male SD rats (20 CAMM, 10 Harlan) and mid-diaphyseal osteotomies were performed. Distraction was performed at 0.2 mm bid for 20 days (CAMM) or 14 days (Harlan). The experimental (DO) and control (contra-lateral) tibiae were removed for high-resolution radiography and decalcified histology. Videomicroscopy was used to quantitate radiodensity, histology (matrix type) and relative areas of cell proliferation, which was identified by proliferating cell nuclear antigen (PCNA) immunochemistry. Both studies demonstrated an age-related decrease in the percent mineralized bone (radiodensity) in the distraction gap (CAMM 9 vs 24 months: 68% vs 51%, P < 0.003; Harlan 4 vs 24 months: 95% vs 36%, P < 0.001) and no significant colony or distraction time-specific difference was seen between the two colonies of 24-month-old rats. Histology was performed on the Harlan rats. The DO gaps in the 24-month-old rats demonstrated less endosteal new bone compared to the 4-month-old rats (P < 0.01), but equivalent periosteal new bone. In 4-month-old rats, PCNA-immunostained cells were organized along the primary matrix front (where the first deposition of osteoid occurs) extending across both periosteal and endosteal surfaces. In 24-month-old rats, PCNA + cells were organized in zones along the periosteal new bone fronts only and irregularly scattered throughout the endosteal gap within a fibrovascular non-ossifying matrix. These results indicate that 24-month-old rats have a relative deficit in endosteal bone formation which may not be related to cell proliferation but rather to cell organization. This model reflects the clinical situation where radiographic findings in older patients demonstrate significant delays in mineralization during DO. We believe this model of DO in aged rats presents unique in vivo opportunities to test hypotheses concerning (1) the effects of aging on bone repair, (2) the effects of pharmacological agents on bone repair in a geriatric setting, and (3) to study the mechanisms underlying DO. © 2001 Orthopaedic Research Society. Published by Elsevier Science Ltd. All rights reserved. [source] Influence of Matrix Type on Surface Roughness of Three Resins for Provisional Crowns and Fixed Partial DenturesJOURNAL OF PROSTHODONTICS, Issue 2 2009Raul Ayuso-Montero DDS Abstract Purpose: This study evaluated the effect of matrix type on the surface roughness of resins for provisional crowns and fixed partial dentures. Materials and Methods: Ninety specimens of two acrylic resins (Trim II, Tab2000) and one bis-acryl composite (Protemp II Garant) were fabricated using one of three matrices: irreversible hydrocolloid (Cavex CA37), poly(vinyl siloxane) (Aquasil) or vacuum-formed matrix (Bio-flow Hard). The sample size for each resin-matrix combination was 10. The vestibular face of one natural maxillary central incisor was used as a model to fabricate all the specimens, following the custom fabrication technique. The average roughness measurements, Ra (,m), were obtained using a profilometer, and the data were analyzed using Kruskal-Wallis and Mann-Whitney U- tests. The results were contrasted against the surface roughness of the tooth using a one-sample t- test. Results: Aquasil and vacuum-formed matrix had a smoother surface than Cavex CA37 regardless of the resin tested (p < 0.05). Protemp II Garant had the smoothest surface regardless of the matrix used, with no significant differences when polymerized against the three different matrices. Trim II polymerized against Cavex CA37 had a rougher (p < 0.05) surface than Aquasil or vacuum-formed matrix. Tab2000 had the smoothest surface (p < 0.05) when polymerized against a vacuum-formed matrix. Conclusions: There is no universal matrix that produces the smoothest surface: this depends on the compatibility between the resin and the matrix. Protemp II Garant polymerized against Cavex CA37 matrix yields a surface that is smooth enough not to require polishing unless this surface is adjusted. [source] Reinforcement of rigid PVC/wood-flour composites with multi-walled carbon nanotubesJOURNAL OF VINYL & ADDITIVE TECHNOLOGY, Issue 2 2008Omar Faruk Multi-walled carbon nanotubes (CNT) were compounded with PVC by a melt blending process based on fusion behaviors of PVC. The effects of CNT content on the flexural and tensile properies of the PVC/CNT composites were evaluated in order to optimize the CNT content. The optimized CNT-reinforced PVC was used as a matrix in the manufacture of wood-plastic composites. Flexural, electrical, and thermal properties of the PVC/wood-flour composites were evaluated as a function of matrix type (nonreinforced vs. CNT-reinforced). The experimental results indicated that rigid PVC/wood-flour composites with properties similar to those of solid wood can be made by using CNT-reinforced PVC as a matrix. The CNT-reinforced PVC did not influence the electrical and thermal conductivity of the PVC/wood-flour composites. J. VINYL ADDIT. TECHNOL., 2008. © 2008 Society of Plastics Engineers. [source] Effect of rubber matrix type on the morphology and reinforcement effects in carbon black-nanoclay hybrid composites,A comparative assessmentPOLYMER COMPOSITES, Issue 1 2010S. Praveen Carbon black (B),nanoclay (NC) hybrid composites, based on millable polyurethane and brominated isoprene isobutylene rubber (BIIR), were prepared. The carbon black loading was fixed at 20 phr and organically modified sodium montmorillonite clay loading varied from 5 to 20 phr in each rubber compounds. The nanocomposites were prepared in laboratory by mixing two-roll mill. The state of dispersion of the layered silicate was studied by X-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD and TEM results indicated intercalation of PU and BIIR into the silicate interlayers, followed by exfoliation of the silicate layers into the elastomer matrices. However, the level of intercalation and exfoliation varied considerably with the type of elastomer. The reinforcing effects obtained were found to depend strongly on the extent and degree of the dispersion of the carbon black and silicate layers into the rubber matrices. Mechanical and dynamic mechanical properties were evaluated for each composite. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers [source] Effects of the Surrounding Matrix on Tree Recruitment in Amazonian Forest FragmentsCONSERVATION BIOLOGY, Issue 3 2006HENRIQUE E. M. NASCIMENTO efectos de borde; especies pioneras; fragmentación de bosques; bosque lluvioso Abstract:,Little is known about how the surrounding modified matrix affects tree recruitment in fragmented forests. We contrasted effects of two different matrix types, Vismia - and Cecropia -dominated regrowth, on recruitment of pioneer tree species in forest fragments in central Amazonia. Our analyses were based on 22, 1-ha plots in seven experimental forest fragments ranging in size from 1 to 100 ha. By 13 to 17 years after fragmentation, the population density of pioneer trees was significantly higher in plots surrounded by Vismia regrowth than in plots surrounded by Cecropia regrowth, and the species composition and dominance of pioneers differed markedly between the two matrix types. Cecropia sciadophylla was the most abundant pioneer in fragments surrounded by Cecropia regrowth (constituting nearly 50% of all pioneer trees), whereas densities of species in Vismia -surrounded fragments were distributed more evenly. Thus the surrounding matrix had a strong influence on patterns of tree recruitment in Amazonian forest fragments. Resumen:,Se conoce poco del efecto de la matriz modificada circundante sobre el reclutamiento de árboles en bosques fragmentados. Contrastamos los efectos de dos tipos diferentes de matriz, vegetación secundaria dominada por Vismia- y Cecropia-, sobre el reclutamiento de especies de árboles pioneros en fragmentos de bosque en la Amazonía central. Nuestros análisis se basaron en 22 parcelas de 1 ha en siete fragmentos de bosque experimentales que varían entre 1 y 1000 ha. Entre 13 y 17 años después de la fragmentación, la densidad poblacional de árboles pioneros era significativamente mayor en parcelas rodeados por Vismia que en las parcelas rodeadas por Cecropia, y la composición y dominancia de especies pioneras fueron marcadamente diferentes en cada tipo de matriz. Cecropia sciadophylla fue la pionera más abundante en fragmentos rodeados por Cecropia (constituyó casi 50% de todos los árboles pioneros), mientras que las densidades de especies en los fragmentos rodeados por Vismia se distribuyeron más homogéneamente. Por lo tanto, la matriz circundante tiene una fuerte influencia sobre los patrones de reclutamiento de árboles en fragmentos de bosque Amazónicos. [source] Pyrene and chrysene fate in surface soil and sand microcosmsENVIRONMENTAL TOXICOLOGY & CHEMISTRY, Issue 2 2001J. Chadwick Roper Abstract Polycyclic aromatic hydrocarbons (PAHs) are major components of wastes from municipal gas plants and many wood preservatives. Soil contaminated with these wastes is a potential threat to human health because of the carcinogenicity of many PAHs. This study follows the fate of two four-ring PAHs, pyrene and chrysene, in three matrices: an adapted soil (obtained from a site contaminated with PAHs for more than 75 years), an uncontaminated soil (with and without an inoculum of adapted soil), and sand mixed with an inoculum of adapted soil. Radiolabeled pyrene, chrysene, and salicylic acid (a metabolite of PAH biodegradation) were used to trace the mineralization, transformation, extractability, and formation of an unextractable residual over time. Linear approximations of the rates of these processes were made. High-performance liquid chromatography (HPLC) analysis of extracts from inoculated soil showed the transient formation of two known metabolites: 1-hydroxypyrene (from pyrene) and 1-hydroxy-2-naphthoic acid (from chrysene). The amount of extractable label diminished steadily over the course of the study in systems that were not inhibited with sodium azide, whereas the amount of extractable label remained relatively constant in inhibited systems. Correspondingly, the amount of nonextractable residual label generally increased during each incubation in uninhibited systems, whereas the amount of this residual label remained relatively constant in inhibited systems. In contrast, the rate and extent of mineralization varied widely across matrix types. This suggests that alterations of the PAH that impact extractability and residual formation are common, in contrast to mineralization, which was apparently limited to adapted communities. [source] | |||||||||||||