Home  About us  Contact
 

Lysozyme Adsorption (lysozyme + adsorption)

Distribution by Scientific Domains
Polymers and Materials Science57%

Selected Abstracts

Bovine Serum Albumin and Lysozyme Adsorption on Calcium Phosphate Particles

ADVANCED ENGINEERING MATERIALS, Issue 1-2 2010
Berit Mueller
Two model proteins that are oppositely charged at neutral pH , bovine serum albumin (BSA) and lysozyme, with acidic and alkaline isoelectric points, respectively , are used to investigate the protein adsorption behaviour of hydroxyapatite and beta-tricalcium phosphate (, -TCP) particles. Both calcium phosphate based particles are highly relevant for the fabrication of bioactive and resorbable bone implants. The investigations are carried out by combining zeta potential and Vis spectroscopy measurements. The changes of zeta potential and isoelectric point are determined as a function of added protein. Both proteins form a monolayer on , -TCP, while on hydroxyapatite only semi-monolayers were measured. For BSA, a side-on adsorption mode is suggested, whereas end-on adsorption appears to be most likely for lysozyme. The zeta potential curves as a function of adsorbed protein show that plateaus of the protein amounts adsorbed increase with charge saturation. In addition, the spatial charge distribution of both proteins is modelled to get a further understanding of the initial adsorption orientation of the biomolecules, supporting the findings from the experimental data. The reported findings can be transferred to the adsorption behaviour of a variety of proteins on calcium phosphate surfaces and are helpful for the fabrication of bone-analogous calcium phosphate/protein nanocomposites. [source]

Studies of lysozyme binding to histamine as a ligand for hydrophobic charge induction chromatography

BIOTECHNOLOGY PROGRESS, Issue 1 2010
Qing-Hong Shi
Abstract Histamine was immobilized on Sepharose CL-6B (Sepharose) for use as a ligand of hydrophobic charge induction chromatography (HCIC) of proteins. Lysozyme adsorption onto Histamine-Sepharose (HA-S) was studied by adsorption equilibrium and calorimetry to uncover the thermodynamic mechanism of the protein binding. In both the experiments, the influence of salt (ammonium sulfate and sodium sulfate) was examined. Adsorption isotherms showed that HA-S exhibited a high salt tolerance in lysozyme adsorption. This property was well explained by the combined contributions of hydrophobic interaction and aromatic stacking. The isotherms were well fitted to the Langmuir equation, and the equilibrium parameters for lysozyme adsorption were obtained. In addition, thermodynamic parameters (,Hads, ,Sads, and ,Gads) for the adsorption were obtained by isothermal titration calorimetry by titrating lysozyme solutions into the adsorbent suspension. Furthermore, free histamine was titrated into lysozyme solution in the same salt-buffers. Compared with the binding of lysozyme to free histamine, lysozyme adsorption onto HA-S was characterized by a less favorable ,Gads and an unfavorable ,Sads because histamine was covalently attached to Sepharose via a three-carbon-chain spacer. Consequently, the immobilized histamine could only associate with the residues on the protein surface rather than those in the hydrophobic pocket, causing a less favorable orientation between histamine and lysozyme. Further comparison of thermodynamic parameters indicated that the unfavorable ,Sads was offset by a favorable ,Hads, thus exhibiting typical enthalpy-entropy compensation. Moreover, thermodynamic analyses indicated the importance of the dehydration of lysozyme molecule and HA-S during the adsorption and a substantial conformational change of the protein during adsorption. The results have provided clear insights into the adsorption mechanisms of lysozyme onto the new HCIC material. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010 [source]

Spectral characterization of lysozyme adsorption on dye-affinity beads

JOURNAL OF APPLIED POLYMER SCIENCE, Issue 6 2008
Nilgün Basar
Abstract Cibacron Blue F3GA-attached magnetic poly(2-hydroxyethyl methacrylate) [mPHEMA] beads were prepared by suspension polymerization of HEMA in the presence of magnetite (Fe3O4) nanopowder. Average diameter size of the mPHEMA beads was 150,200 ,m. The characteristic functional groups of Cibacron Blue F3GA-attached mPHEMA beads were analyzed by Fourier transform infrared spectrometer (FTIR) and Raman scattering spectrometer. The lysozyme adsorption and desorption characteristics of Cibacron Blue F3GA-attached mPHEMA beads were also investigated using FTIR and Raman spectroscopic techniques. When the Raman spectrum of lysozyme adsorbed mPHEMA is evaluated characteristic Amide-I band appears at 1657 cm,1. The intensity of this band decreases in the spectrum of lysozyme desorbed mPHEMA sample. When the characteristic bands of lysozyme adsorbed and desorbed mPHEMA samples are compared, the band intensities of desorbed sample are lower than those of lysozyme adsorbed sample except for the band appearing at 656 cm,1 (Tyr vCS). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 [source]

Dye-affinity hollow-fibres and their lysozyme adsorption,desorption characteristics

POLYMER INTERNATIONAL, Issue 10 2001
Serap, enel
Abstract Dye-affinity adsorption is increasingly used for protein separation. Hollow-fibres have advantages as adsorbents in comparison to conventional bead supports because they are not compressible and can eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow-fibres to which Reactive Green HE-4BD was attached for adsorption of lysozyme. The hollow-fibre was characterized by scanning electron microscopy. These dye-carrying hollow-fibres (26.3,µmol,g,1) were used in the lysozyme adsorption,elution studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye-attached hollow-fibres was studied in a batch system. The non-specific adsorption of lysozyme on the polyamide hollow-fibres was 1.8,mg,g,1. Reactive Green HE-4BD attachment significantly increased the lysozyme adsorption up to 41.1,mg,g,1. Langmuir adsorption model was found to be applicable in interpreting lead adsorption by Reactive Green HE-4BD attached hollow fibres. Significant amount of the adsorbed lysozyme (up to 95%) was eluted in 1,h in the elution medium containing 1.0,M NaSCN at pH 8.0. In order to determine the effects of adsorption conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We concluded that polyamide dye-affinity hollow-fibres can be applied for lysozyme adsorption without causing any significant conformational changes. Repeated adsorption,elution processes showed that these dye-attached hollow-fibres are suitable for lysozyme adsorption. © 2001 Society of Chemical Industry [source]

Studies of lysozyme binding to histamine as a ligand for hydrophobic charge induction chromatography

BIOTECHNOLOGY PROGRESS, Issue 1 2010
Qing-Hong Shi
Abstract Histamine was immobilized on Sepharose CL-6B (Sepharose) for use as a ligand of hydrophobic charge induction chromatography (HCIC) of proteins. Lysozyme adsorption onto Histamine-Sepharose (HA-S) was studied by adsorption equilibrium and calorimetry to uncover the thermodynamic mechanism of the protein binding. In both the experiments, the influence of salt (ammonium sulfate and sodium sulfate) was examined. Adsorption isotherms showed that HA-S exhibited a high salt tolerance in lysozyme adsorption. This property was well explained by the combined contributions of hydrophobic interaction and aromatic stacking. The isotherms were well fitted to the Langmuir equation, and the equilibrium parameters for lysozyme adsorption were obtained. In addition, thermodynamic parameters (,Hads, ,Sads, and ,Gads) for the adsorption were obtained by isothermal titration calorimetry by titrating lysozyme solutions into the adsorbent suspension. Furthermore, free histamine was titrated into lysozyme solution in the same salt-buffers. Compared with the binding of lysozyme to free histamine, lysozyme adsorption onto HA-S was characterized by a less favorable ,Gads and an unfavorable ,Sads because histamine was covalently attached to Sepharose via a three-carbon-chain spacer. Consequently, the immobilized histamine could only associate with the residues on the protein surface rather than those in the hydrophobic pocket, causing a less favorable orientation between histamine and lysozyme. Further comparison of thermodynamic parameters indicated that the unfavorable ,Sads was offset by a favorable ,Hads, thus exhibiting typical enthalpy-entropy compensation. Moreover, thermodynamic analyses indicated the importance of the dehydration of lysozyme molecule and HA-S during the adsorption and a substantial conformational change of the protein during adsorption. The results have provided clear insights into the adsorption mechanisms of lysozyme onto the new HCIC material. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010 [source]

A Novel Magnetic Affinity Support for Protein Adsorption and Purification

BIOTECHNOLOGY PROGRESS, Issue 1 2001
Xiao-Dong Tong
A novel magnetic support was prepared by an oxidization-precipitation method with poly(vinyl alcohol) (PVA) as the entrapment material. Transmission electron microscopy indicated that the magnetic particles had a core-shell structure, containing many nanometer-sized magnetic cores stabilized by the cross-linked PVA. The particles showed a high magnetic responsiveness in magnetic field, and no aggregation of the particles was observed after the particles had been treated in the magnetic field. These facts indicated that the particles were superparamagnetic. Cibacron blue 3GA (CB) was coupled to the particles to prepare a magnetic affinity support (MAS) for protein adsorption. Lysozyme was used as a model protein to test the adsorption properties of the MAS. The adsorption equilibrium of lysozyme to the MAS was described by the Langmuir-type isotherm. The capacity for lysozyme adsorption was more than 70 mg/g MAS (wet weight) at a relatively low CB coupling density (3,5 ,mol/g). In addition, 1.0 M NaCl solution could be used to dissociate the adsorbed lysozyme. Finally, the MAS was recycled for the purification of alcohol dehydrogenase (ADH) from clarified yeast homogenates. Under proper conditions, the magnetic separation yielded over 5-fold purification of the enzyme with 60% recovery of the enzyme activity. [source]