Indentation Test (indentation + test)

Distribution by Scientific Domains


Selected Abstracts


CHARACTERIZATION OF THE NONLINEAR VISCOELASTIC CONSTITUTIVE PROPERTIES OF MILD CHEDDAR CHEESE FROM INDENTATION TESTS

JOURNAL OF TEXTURE STUDIES, Issue 5-6 2005
S.M. GOH
ABSTRACT A methodology to convert the indentation force,displacement response into the stress,strain properties of nonlinear viscoelastic materials was evaluated. Mild cheddar cheese was used as the test material, and indentation tests were performed using two spherical indenters of different sizes. The indentation tests were performed at different speeds, and the corresponding force,displacement responses were fitted with an analytical solution to obtain the time-dependent constants and the instantaneous force,displacement response. An inverse analysis based on the finite element method was performed to obtain the strain-dependent constants from the instantaneous force,displacement response. The predictions of the viscoelastic stress,strain properties from the indentation tests were compared to independent measurements through uniaxial compression tests, and a reasonable agreement was obtained. [source]


Does low-intensity pulsed ultrasound stimulate maturation of tissue-engineered cartilage?

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 1 2004
Georg N. Duda
Abstract Traumatic events are a primary cause of local lesions of articular cartilage. Tissue engineered, cartilage-like structures represent an alternative to current treatment methods. The time necessary for tissue maturation and the mechanical quality of the regenerate at implantation are both critical factors for clinical success. Low-intensity pulsed ultrasound has proven to accelerate chondrogenesis in vitro. The goal of this study was to evaluate whether low-intensity pulsed ultrasound is capable of accelerating the process of cartilage maturation and increasing regenerate stability. Hyaline-like cartilage specimens were generated in vitro and subcutaneously implanted in the backs of nude mice. Twenty-eight animals received 20 min of low-intensity pulsed ultrasound treatment daily, and 28 animals received a sham treatment. Specimens were explanted after 1, 3, 6, and 12 weeks, mechanically tested with the use of an indentation test, histologically examined, and processed for RT-PCR. The Young's moduli significantly increased from 3 to 12 weeks, and at 6 weeks were comparable to those of native articular cartilage. In histological examination, specimens showed neocartilage formation. There was no significant difference between ultrasound-treated and sham-treated groups. The mechanical stability of the neocartilage specimens increased with treatment time and reached values of native cartilage after 6 weeks in vivo. Low-intensity pulsed-ultrasound stimulation showed no stimulatory effect on tissue maturation. In contrast, ultrasound-treated specimens showed a reduced Col 2 expression at 1 week and were significantly less stiff compared to native cartilage at 6 and 12 weeks. An acceleration of the maturation of tissue-engineered neocartilage in a clinical setting by means of low-intensity pulsed ultrasound therefore appears rather unrealistic. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 68B: 21,28, 2004 [source]


Application of a Depth Sensing Indentation Hardness Test to Evaluate the Mechanical Properties of Food Materials

JOURNAL OF FOOD SCIENCE, Issue 5 2002
N. ÖZkan
ABSTRACT: A depth sensing indentation hardness test with an associated analysis is described as a convenient and simple technique for characterizing mechanical properties of food materials, such as hardness (H), elastic modulus (E), and an elasticity index (IE), which represents the ratio of elastic to total deformation. Storage modulus (G,) and loss tangent (tan§) of the selected model food material, a whey protein concentrate (WPC) gel, have also been determined using an oscillatory dynamic testing. Fractal dimension (D) and strain rate (or frequency) exponent (n) of the WPC gels were determined using both the indentation and dynamic test results. A good correlation between the results from the indentation and the dynamic tests was established. The effects of protein concentration, deformation rate, and chemical treatment on the mechanical properties of the WPC gels were clearly illustrated using the indentation test. [source]


Repair of porcine articular cartilage defect with a biphasic osteochondral composite,

JOURNAL OF ORTHOPAEDIC RESEARCH, Issue 10 2007
Ching-Chuan Jiang
Abstract Autologous chondrocyte implantation (ACI) has been recently used to treat cartilage defects. Partly because of the success of mosaicplasty, a procedure that involves the implantation of native osteochondral plugs, it is of potential significance to consider the application of ACI in the form of biphasic osteochondral composites. To test the clinical applicability of such composite construct, we repaired osteochondral defect with ACI at low cell-seeding density on a biphasic scaffold, and combined graft harvest and implantation in a single surgery. We fabricated a biphasic cylindrical porous plug of DL-poly-lactide-co-glycolide, with its lower body impregnated with ,-tricalcium phosphate as the osseous phase. Osteochondral defects were surgically created at the weight-bearing surface of femoral condyles of Lee-Sung mini-pigs. Autologous chondrocytes isolated from the cartilage were seeded into the upper, chondral phase of the plug, which was inserted by press-fitting to fill the defect. Defects treated with cell-free plugs served as control. Outcome of repair was examined 6 months after surgery. In the osseous phase, the biomaterial retained in the center and cancellous bone formed in the periphery, integrating well with native subchondral bone with extensive remodeling, as depicted on X-ray roentgenography by higher radiolucency. In the chondral phase, collagen type II immunohistochemistry and Safranin O histological staining showed hyaline cartilage regeneration in the experimental group, whereas only fibrous tissue formed in the control group. On the International Cartilage Repair Society Scale, the experimental group had higher mean scores in surface, matrix, cell distribution, and cell viability than control, but was comparable with the control group in subchondral bone and mineralization. Tensile stress,relaxation behavior determined by uni-axial indentation test revealed similar creep property between the surface of the experimental specimen and native cartilage, but not the control specimen. Implanted autologous chondrocytes could survive and could yield hyaline-like cartilage in vivo in the biphasic biomaterial construct. Pre-seeding of osteogenic cells did not appear to be necessary to regenerate subchondral bone. © 2007 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 25:1277,1290, 2007 [source]


Role of Internal Friction in Indentation Damage in a Mica-Containing Glass-Ceramic

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 11 2001
Anthony C. Fischer-Cripps
The indentation response of a mica-containing glass-ceramic that exhibits shear-driven yield in an indentation test is interpreted in terms of events occurring on the microstructural scale. It is proposed that shear-driven damage within the specimen occurs via internal sliding along cleavage planes within the mica platelets. The sliding surfaces in this case are considered to be atomically smooth so the real and apparent areas of contact coincide. The frictional shear stress is thus independent of the normal forces arising from thermal mismatch stresses and only depends on the work of adhesion of the interface and the scale of the contacts. The scale of contacts for these materials lies within an intermediate zone in which the frictional shear stress arises from the stress required to nucleate dislocation-like discontinuities within the material. This leads to a size effect similar to that experienced by a crack in Mode II loading and is in accordance with previous work in which a connection between such a size effect and the macroscopic response of the material was identified. This work has particular relevance to the design and manufacturing of ceramics in machining, wear, bearings, and coatings applications. [source]


Scratch properties of poly(methyl methacrylate) surfaces: The time-temperature dependence of friction and hardness

LUBRICATION SCIENCE, Issue 3 2002
C. Gauthier
Abstract Viscoelastic-viscoplastic behaviour is usually not taken into account in models describing the scratch properties of polymeric surfaces. In the case of a standard indentation test with stationary tip, the elastic-plastic boundary and the boundary of the region being subjected to hydrostatic pressure beneath the tip are understood. Such well-known models have been used in this study to understand the geometry of the groove left on the surface of a viscoelastic-viscoplastic body by a moving diamond tip. A new apparatus was built that can control the velocity of the tip over the range 1 ,m/s to 15 mm/s, at several different temperatures from ,10 to +100°C. The material used was a commercial grade of cast poly(methyl methacrylate) (PMMA). The normal and tangential loads and groove size were used to evaluate the dynamic hardness, which behaved like a stress- and temperature-activated process. The values for the activation energy and volumes of the dynamic hardness and of the interfacial shear stress were in good agreement with the mechanical properties usually attributed to PMMA. [source]


Repair of porcine articular cartilage defect with autologous chondrocyte transplantation

JOURNAL OF ORTHOPAEDIC RESEARCH, Issue 3 2005
Hongsen Chiang
Abstract Articular cartilage is known to have poor healing capacity after injury. Autologous chondral grafting remains the mainstay to treat well-defined, full-thickness, symptomatic cartilage defects. We demonstrated the utilization of gelatin microbeads to deliver autologous chondrocytes for in vivo cartilage generation. Chondrocytes were harvested from the left forelimbs of 12 Lee-Sung pigs. The cells were expanded in monolayer culture and then seeded onto gelatin microbeads or left in monolayer. Shortly before implantation, the cell-laden beads were mixed with collagen type I gel, while the cells in monolayer culture were collected and re-suspended in culture medium. Full-thickness cartilage defects were surgically created in the weight-bearing surface of the femoral condyles of both knees, covered by periosteal patches taken from proximal tibia, and sealed with a porcine fibrin glue. In total, 48 condyles were equally allotted to experimental, control, and null groups that were filled beneath the patch with chondrocyte-laden beads in gel, chondrocytes in plain medium solution, or nothing, respectively. The repair was examined 6 months post-surgery on the basis of macroscopic appearance, histological scores based on the International Cartilage Repair Society Scale, and the proportion of characteristic chondrocytes. Tensile stress-relaxation behavior was determined from uniaxial indentation tests. The experimental group scored higher than the control group in the categories of matrix nature, cell distribution pattern, and absence of mineralization, with similar surface smoothness. Both the experimental and control groups were superior to the null group in the above-mentioned categories. Viable cell populations were equal in all groups, but the proportion of characteristic chondrocytes was highest in the experimental group. Matrix stiffness was ranked as null > native cartilage > control > experimental group. Transplanted autologous chondrocytes survive and could yield hyaline-like cartilage. The application of beads and gel for transplantation helped to retain the transferred cells in situ and maintain a better chondrocyte phenotype. © 2004 Orthopaedic Research Society. Published by Elsevier Ltd. All rights reserved. [source]


CHARACTERIZATION OF THE NONLINEAR VISCOELASTIC CONSTITUTIVE PROPERTIES OF MILD CHEDDAR CHEESE FROM INDENTATION TESTS

JOURNAL OF TEXTURE STUDIES, Issue 5-6 2005
S.M. GOH
ABSTRACT A methodology to convert the indentation force,displacement response into the stress,strain properties of nonlinear viscoelastic materials was evaluated. Mild cheddar cheese was used as the test material, and indentation tests were performed using two spherical indenters of different sizes. The indentation tests were performed at different speeds, and the corresponding force,displacement responses were fitted with an analytical solution to obtain the time-dependent constants and the instantaneous force,displacement response. An inverse analysis based on the finite element method was performed to obtain the strain-dependent constants from the instantaneous force,displacement response. The predictions of the viscoelastic stress,strain properties from the indentation tests were compared to independent measurements through uniaxial compression tests, and a reasonable agreement was obtained. [source]


Stepwise-Graded Si3N4,SiC Ceramics with Improved Wear Properties

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 8 2002
Scott C. Thompson
The processing of stepwise graded Si3N4/SiC ceramics by pressureless co-sintering is described. Here, SiC (high elastic modulus, high thermal expansion coefficient) forms the substrate and Si3N4 (low elastic modulus, low thermal expansion coefficient) forms the top contact surface, with a stepwise gradient in composition existing between the two over a depth of ,1.7 mm. The resulting Si3N4 contact surface is fine-grained and dense, and it contains only 2 vol% yttrium aluminum garnet (YAG) additive. This graded ceramic shows resistance to cone-crack formation under Hertzian indentation, which is attributed to a combined effect of the elastic-modulus gradient and the compressive thermal-expansion-mismatch residual stress present at the contact surface. The presence of the residual stress is corroborated and quantified using Vickers indentation tests. The graded ceramic also possesses wear properties that are significantly improved compared with dense, monolithic Si3N4 containing 2 vol% YAG additive. The improved wear resistance is attributed solely to the large compressive stress present at the contact surface. A modification of the simple wear model by Lawn and co-workers is used to rationalize the wear results. Results from this work clearly show that the introduction of surface compressive residual stresses can significantly improve the wear resistance of polycrystalline ceramics, which may have important implications for the design of contact-damage-resistant ceramics. [source]


Evaluation of Adhesion and Wear Resistance of DLC Films Deposited by Various Methods

PLASMA PROCESSES AND POLYMERS, Issue 6-7 2009
Takahiro Horiuchi
Abstract Diamond-like carbon (DLC) coatings are currently being used in a wide variety of industrial fields because of their outstanding properties, such as high hardness and low friction coefficient, among others. DLC coatings have various characteristics depending on the deposition method used. However, they have a problem regarding adhesion with the base material, which is a major factor hindering their expanded application in other fields. The adhesion of DLC coatings is generally evaluated using Rockwell indentation tests and scratch tests. These test methods induce damage in the specimen with the application of a single load. Accordingly, there is a problem of low correlation between such test results and evaluations of the adhesion of coatings on actual components that undergo repeated sliding cycles. With the aim of resolving that problem, this study evaluated the damage condition of three types of DLC coatings having different physical properties using newly devised cyclic sliding test methods involving the application of a continuously increasing load. The evaluation results obtained with these new methods differed from the results of Rockwell tests and scratch tests. These new test methods are more able to reproduce the damage done to DLC coatings in actual sliding cycles. This paper describes the test procedures and the evaluation results obtained. [source]


Roles of additives in scratch resistance of high crystallinity polypropylene copolymers

POLYMER ENGINEERING & SCIENCE, Issue 1 2001
C. Xiang
Scratch behavior in neat and talc-filled high crystallinity polypropylene (PP) copolymers containing various additives is investigated using a cosntant load scratch test and two types of indentation tests (Rockwell and Shore D). The talcfilled PP copolymer exhibits high scratch visibilityand scratch depth. The addition of a nucleating agent or lubricant improves the scratch resistance of the talc-filled PP copolymer. Differential scanning calorimetry, scanning electron microscopy and attenuated total reflectance Fourier transform infrared spectroscopy are used to characterize crystallinity morphology and scratch mechanisms in PP systems. It is found that the scratch resistance of the PP copolymer systems investigated, in terms of scratch depth and scratch visibility, depends mainly on the fracture features generated during the scratch process. The influences of talc, nucleating agent and lubricant on the scratch behavior of PP are discussed. [source]