Home About us Contact
|
Home About us Contact | ||
|
|
||
Impact Structure (impact + structure)
Selected AbstractsThe Swedish Deep Drilling Program: the quest for the Earth's inner secretsGEOLOGY TODAY, Issue 6 2009Henning Lorenz The Swedish Deep Drilling Program (SDDP) has been initiated to study fundamental problems of the dynamic Earth system, its natural history and evolution. Many key scientific questions can be addressed through in situ investigations only, requiring deep continental drilling. Some are unique to Scandinavia, most are of international interest and significance. At present, five core projects (Fig. 1) with international teams are integrating scientific problems with societal and industrial applications. If SDDP succeeds to attract the funding required, Sweden will have a number of world-class boreholes at key locations by 2020. Figure 1. Locations of SDDP drilling project proposals. PFDP,Postglacial Fault Drilling Project; PaMVAS,Palaeoproterozoic mineralized volcanic arc systems: the Skellefte District; COSC,Collisional Orogeny in the Scandinavian Caledonides; DRL,The Dellen Impact Crater, a geoscientific deep rock laboratory; SELHO,Svecofennian accretion, an example of the early structural evolution in a large hot orogen; CISP,Concentric Impact Structures in the Palaeozoic: the Lockne and Siljan craters. Background and inset image from Blue Marble Next Generation data set (NASA Earth Observatory, http://earthobservatory.nasa.gov/Features/BlueMarble/). [source] Geophysical survey of the proposed Tsenkher impact structure, Gobi Altai, MongoliaMETEORITICS & PLANETARY SCIENCE, Issue 3 2010Jens ORMÖ Extensive occurrences of brecciated rocks, mainly in the form of an ejecta blanket outside the elevated rim of the structure, support an explosive origin (e.g., cosmic impact, explosive volcanism). The host rocks in the area are mainly weakly magnetic, silica-rich sandstones, and siltstones. A near absence of surface exposures of volcanic rocks makes any major volcanic structures (e.g., caldera) unlikely. Likewise, the magnetic models exclude any large, subsurface, intrusive body. This is supported by an 8 mGal gravity low over the structure indicating a subsurface low density body. Instead, the best fit is achieved for a bowl-shaped structure with a slight central rise as expected for an impact crater of this size in mainly sedimentary target. The structure can be either root-less (i.e., impact crater) or rooted with a narrow feeder dyke with relatively higher magnetic susceptibility and density (i.e., volcanic maar crater). The geophysical signature, the solitary appearance, the predominantly sedimentary setting, and the comparably large size of the Tsenkher structure favor the impact crater alternative. However, until mineralogical/geochemical evidence for an impact is presented, the maar alternative remains plausible although exceptional as it would make the Tsenkher structure one of the largest in the world in an unusual setting for maar craters. [source] Archaeabacterial lipids in drill core samples from the Bosumtwi impact structure, GhanaMETEORITICS & PLANETARY SCIENCE, Issue 11 2008Marina ESCALA The Bosumtwi crater in Ghana (West Africa) is a relatively young (1.07 Myr) structure with a rim-to-rim diameter of about 10.5 km. In a preliminary study targeting the subsurface microbial life in the impact structure, seven samples of the impact breccia from the central uplift of the Bosumtwi crater were analyzed for the presence of typical archaeal membrane-lipids (GDGTs). These have been detected in four of the samples, at a maximum depth of 382 m below the lake surface, which is equivalent to 309 m below the surface sediment. The concentration of the GDGTs does not show a trend with depth, and their distribution is dominated by GDGT-0. Possible origins of these lipids could be related to the soils or rocks predating the impact event, the hydrothermal system generated after the impact, or due to more recent underground water [source] An international and multidisciplinary drilling project into a young complex impact structure: The 2004 ICDP Bosumtwi Crater Drilling Project,An overviewMETEORITICS & PLANETARY SCIENCE, Issue 4-5 2007Christian KOEBERL It is the source crater of the Ivory Coast tektites. The structure was excavated in 2.1,2.2 Gyr old metasediments and metavolcanics of the Birimian Supergroup. A drilling project was conceived that would combine two major scientific interests in this crater: 1) to obtain a complete paleoenvironmental record from the time of crater formation about one million years ago, at a near-equatorial location in Africa for which very few data are available so far, and 2) to obtain a complete record of impactites at the central uplift and in the crater moat, for ground truthing and comparison with other structures. Within the framework of an international and multidisciplinary drilling project led by the International Continental Scientific Drilling Program (ICDP), 16 drill cores were obtained from June to October 2004 at six locations within Lake Bosumtwi, which is 8.5 km in diameter. The 14 sediment cores are currently being investigated for paleoenvironmental indicators. The two impactite cores LB-07A and LB-08A were drilled into the deepest section of the annular moat (540 m) and the flank of the central uplift (450 m), respectively. They are the main subject of this special issue of Meteoritics & Planetary Science, which represents the first detailed presentations of results from the deep drilling into the Bosumtwi impactite sequence. Drilling progressed in both cases through the impact breccia layer into fractured bedrock. LB-07A comprises lithic (in the uppermost part) and suevitic impact breccias with appreciable amounts of impact melt fragments. The lithic clast content is dominated by graywacke, besides various metapelites, quartzite, and a carbonate target component. Shock deformation in the form of quartz grains with planar microdeformations is abundant. First chemical results indicate a number of suevite samples that are strongly enriched in siderophile elements and Mg, but the presence of a definite meteoritic component in these samples cannot be confirmed due to high indigenous values. Core LB-08A comprises suevitic breccia in the uppermost part, followed with depth by a thick sequence of graywacke-dominated metasediment with suevite and a few granitoid dike intercalations. It is assumed that the metasediment package represents bedrock intersected in the flank of the central uplift. Both 7A and 8A suevite intersections differ from suevites outside of the northern crater rim. Deep drilling results confirmed the gross structure of the crater as imaged by the pre-drilling seismic surveys. Borehole geophysical studies conducted in the two boreholes confirmed the low seismic velocities for the post-impact sediments (less than 1800 m/s) and the impactites (2600,3300 m/s). The impactites exhibit very high porosities (up to 30 vol%), which has important implications for mechanical rock stability. The statistical analysis of the velocities and densities reveals a seismically transparent impactite sequence (free of prominent internal reflections). Petrophysical core analyses provide no support for the presence of a homogeneous magnetic unit (= melt breccia) within the center of the structure. Borehole vector magnetic data point to a patchy distribution of highly magnetic rocks within the impactite sequence. The lack of a coherent melt sheet, or indeed of any significant amounts of melt rock in the crater fill, is in contrast to expectations from modeling and pre-drilling geophysics, and presents an interesting problem for comparative studies and requires re-evaluation of existing data from other terrestrial impact craters, as well as modeling parameters. [source] Petrography, geochemistry, and alteration of country rocks from the Bosumtwi impact structure, GhanaMETEORITICS & PLANETARY SCIENCE, Issue 4-5 2007Forson KARIKARI The country rocks, mainly meta-graywacke, shale, and phyllite of the Early Proterozoic Birimian Supergroup and some granites of similar age, are characterized by two generations of alteration. A pre-impact hydrothermal alteration, often along shear zones, is characterized by new growth of secondary minerals, such as chlorite, sericite, sulfides, and quartz, or replacement of some primary minerals, such as plagioclase and biotite, by secondary sericite and chlorite. A late, argillic alteration, mostly associated with the suevites, is characterized by alteration of the melt/glass clasts in the groundmass of suevites to phyllosilicates. Suevite, which occurs in restricted locations to the north and to the south-southwest of the crater rim, contains melt fragments, diaplectic quartz glass, ballen quartz, and clasts derived from the full variety of target rocks. No planar deformation features (PDFs) in quartz were found in the country rock samples, and only a few quartz grains in the suevite samples show PDFs, and in rare cases two sets of PDFs. Based on a total alkali element-silica (TAS) plot, the Bosumtwi granites have tonalitic to quartz-dioritic compositions. The Nb versus Y and Ta versus Yb discrimination plots show that these granites are of volcanic-arc tectonic provenance. Provenance studies of the metasedimentary rocks at the Bosumtwi crater have also indicated that the metasediments are volcanic-arc related. Compared to the average siderophile element contents of the upper continental crust, both country rocks and impact breccias of the Bosumtwi structure show elevated siderophile element contents. This, however, does not indicate the presence of an extraterrestrial component in Bosumtwi suevite, because the Birimian country rocks also have elevated siderophile element contents, which is thought to result from regional hydrothermal alteration that is also related to widespread sulfide and gold mineralization. [source] Drill core LB-08A, Bosumtwi impact structure, Ghana: Geochemistry of fallback breccia and basement samples from the central upliftMETEORITICS & PLANETARY SCIENCE, Issue 4-5 2007Ludovic FERRIÈRE Two boreholes were drilled to acquire hard-rock samples of the deep crater moat and from the flank of the central uplift (LB-07A and LB-08A, respectively) during a recent ICDP-sponsored drilling project. Here we present results of major and trace element analysis of 112 samples from drill core LB-08A. This core, which was recovered between 235.6 and 451.33 m depth below lake level, contains polymict lithic breccia intercalated with suevite, which overlies fractured/brecciated metasediment. The basement is dominated by meta-graywacke (from fine-grained to gritty), but also includes some phyllite and slate, as well as suevite dikelets and a few units of a distinct light greenish gray, medium-grained meta-graywacke. Most of the variations of the major and trace element abundances in the different lithologies result from the initial compositional variations of the various target rock types, as well as from aqueous alteration processes, which have undeniably affected the different rocks. Suevite from core LB-08A (fallback suevite) and fallout suevite samples (from outside the northern crater rim) display some differences in major (mainly in MgO, CaO, and Na2O contents) and minor (mainly Cr and Ni) element abundances that could be related to the higher degree of alteration of fallback suevites, but also result from differences in the clast populations of the two suevite populations. For example, granite clasts are present in fallout suevite but not in fallback breccia, and calcite clasts are present in fallback breccia and not in fallout suevite. Chondrite-normalized rare earth element abundance patterns for polymict impact breccia and basement samples are very similar to each other. Siderophile element contents in the impact breccias are not significantly different from those of the metasediments, or compared to target rocks from outside the crater rim. So far, no evidence for a meteoritic component has been detected in polymict impact breccias during this study, in agreement with previous work. [source] Uppermost impact fallback layer in the Bosumtwi crater (Ghana): Mineralogy, geochemistry, and comparison with Ivory Coast tektitesMETEORITICS & PLANETARY SCIENCE, Issue 4-5 2007Christian KOEBERL In one (LB-05) of 16 cores drilled into the lake sediments, the zone between the impact breccias and the post-impact sediments was penetrated, preserving the final, fine-grained impact fallback layer. This ,30 cm thick layer contains in the top 10 cm "accretionary" lapilli, microtektite-like glass spherules, and shocked quartz grains. Glass particles,mostly of splash form less than 1 mm size,make up the bulk of the grains (,70,78% by number) in the coarser size fraction (>125 ,m) of the top of the fallback layer. About one-third of all quartz grains in the uppermost part of the layer are shocked, with planar deformation features (PDFs); almost half of these grains are highly shocked, with 3 or more sets of PDFs. K-feldspar grains also occur and some show shock deformation. The abundance of shocked quartz grains and the average shock level as indicated by the number of sets of PDFs, for both quartz and K-feldspar, decrease with depth into the layer. The well-preserved glass spherules and fragments are chemically rather homogeneous within each particle, and also show relatively small variations between the various particles. On average, the composition of the fallback spherules from core LB-5B is very similar to the composition of Ivory Coast tektites and microtektites, with the exception of CaO contents, which are about 1.5 to 2 times higher in the fallback spherules. This is a rare case in which the uppermost fallback layer and the transition to the post-impact sediments has been preserved in an impact structure; its presence indicates that the impactite sequence at Bosumtwi is complete and that Bosumtwi is a very well-preserved impact crater. [source] Impactites as a random medium,Using variations in physical properties to assess heterogeneity within the Bosumtwi meteorite impact craterMETEORITICS & PLANETARY SCIENCE, Issue 4-5 2007Elizabeth L'HEUREUX The damage induced by impact results in extensive fracturing and mixing of target materials. We discuss here a means of using sonic velocity and density logs from two boreholes through the Bosumtwi crater fill and basement to estimate the degree of heterogeneity and fracturing within the impacted target, in order to understand the discrepancy between the large impedances derived from the log data and the nonreflective zone of impactites observed in seismic sections. Based on an analysis of the stochastic fluctuations in the log data, the Bosumtwi impactites are characterized by vertical scale lengths of 2,3 m. From the resolution of the seismic data over the crater, horizontal scale lengths are estimated at <12 m. The impactites therefore fall within the quasi-homogeneous scattering regime, i.e., seismic energy will propagate through the medium with little disruption. Scale lengths as small as these are observed in the fractured basement rocks of impact structures, whereas non-impact related crystalline environments are characterized by scale lengths an order of magnitude larger. Assuming that the high-frequency fluctuations observed in the log data are more sensitive to fracture distribution than petrology, this suggests that the small scale lengths observed within impact structures are characteristic of impact-induced damage, and could be used to estimate the extent of fracturing undergone by the rocks at any depth below an impact structure. [source] Integrated 3-D model from gravity and petrophysical data at the Bosumtwi impact structure, GhanaMETEORITICS & PLANETARY SCIENCE, Issue 4-5 2007Hernan UGALDE A vast amount of geoscience data is available from the pre-site surveys and the actual drilling phase. A 3-D gravity model was constructed and calibrated with the available data from the two ICDP boreholes, LB-07A and LB-08A. The 3-D gravity model results agree well with both the sediment thickness and size of the central uplift revealed by previously collected seismic data, and with the petrophysical data from the LB-08A and LB-07A core materials and the two borehole logs. Furthermore, the model exhibits lateral density variations across the structure and refines the results from previous 2.5-D modeling. An important new element of the 3-D model is that the thickness of the intervals comprising polymict lithic impact breccia and suevite, monomict lithic breccia and fractured basement is much smaller than that predicted by numerical modeling. [source] Paleomagnetism and petrophysics of the Jänisjärvi impact structure, Russian KareliaMETEORITICS & PLANETARY SCIENCE, Issue 12 2006J. Salminen The impactites (tagamites, suevites, and lithic breccias) are characterized by increased porosity and magnetization, which is in agreement with observations performed at other impact structures. Thermomagnetic, hysteresis, and scanning electron microscope (SEM) analysis document the presence of primary multidomain titanomagnetite with additional secondary titanomaghemite and ilmenohematite. The characteristic impact-related remanent magnetization (ChRM) direction (D = 101.5°, I = 73.1°, ,95 = 6.2°) yields a pole (Lat. = 45.0°N, Long. = 76.9°E, dp = 9.9°, dm = 11.0°). Additionally, the same component is observed as an overprint on some rocks located in the vicinity of the structure, which provides proofs of its primary origin. An attempt was made to determine the ancient geomagnetic field intensity. Seven reliable results were obtained, yielding an ancient intensity of 68.7 ± 7.6 ,T (corresponding to VDM of 10.3 ± 1.1 times 1022 Am2). The intensity, however, appears to be biased toward high values mainly because of the concave shape of the Arai diagrams. The new paleomagnetic data and published isotopic ages for the structure are in disagreement. According to well-defined paleomagnetic data, two possible ages for magnetization of Jänisjärvi rocks exist: 1) Late Sveconorwegian age (900,850 Myr) or 2) Late Cambrian age (,500 Myr). However, published isotopic ages are 718 ± 5 Myr (K-Ar) and 698 ± 22 Myr (39Ar- 40Ar), but such isotopic dating methods are often ambiguous for the impactites. [source] Chesapeake Bay impact structure: Morphology, crater fill, and relevance for impact structures on MarsMETEORITICS & PLANETARY SCIENCE, Issue 10 2006J. Wright Horton Jr. It provides an accessible analog for studying impact processes in layered and wet targets on volatile-rich planets. The CBIS formed in a layered target of water, weak clastic sediments, and hard crystalline rock. The buried structure consists of a deep, filled central crater, 38 km in width, surrounded by a shallower brim known as the annular trough. The annular trough formed partly by collapse of weak sediments, which expanded the structure to ,85 km in diameter. Such extensive collapse, in addition to excavation processes, can explain the "inverted sombrero" morphology observed at some craters in layered targets. The distribution of crater-fill materials in the CBIS is related to the morphology. Suevitic breccia, including pre-resurge fallback deposits, is found in the central crater. Impact-modified sediments, formed by fluidization and collapse of water-saturated sand and silt-clay, occur in the annular trough. Allogenic sediment-clast breccia, interpreted as ocean-resurge deposits, overlies the other impactites and covers the entire crater beneath a blanket of postimpact sediments. The formation of chaotic terrains on Mars is attributed to collapse due to the release of volatiles from thick layered deposits. Some flat-floored rimless depressions with chaotic infill in these terrains are impact craters that expanded by collapse farther than expected for similar-sized complex craters in solid targets. Studies of crater materials in the CBIS provide insights into processes of crater expansion on Mars and their links to volatiles. [source] Role of water in the formation of the Late Cretaceous Wetumpka impact structure, inner Gulf Coastal Plain of Alabama, USAMETEORITICS & PLANETARY SCIENCE, Issue 10 2006David T. King Jr. Excavation flow and connate marine water are interpreted to be factors in this collapse. This partial rim collapse catastrophically emplaced an upper-structure-filling unit of broken and redistributed sedimentary target formations, which presently mantles the deeper fallback breccia deposits within the structure. Furthermore, rim collapse flow facilitated the formation of a structurally modified, extrastructure terrain, which is located outside and adjacent to the collapsed rim segment. This extrastructure terrain appears to be the product of extensive slumping of poorly consolidated target sedimentary formations. [source] Geological overview and cratering model for the Haughton impact structure, Devon Island, Canadian High ArcticMETEORITICS & PLANETARY SCIENCE, Issue 12 2005Gordon R. Osinski Regional geological mapping has refined the sedimentary target stratigraphy and constrained the thickness of the sedimentary sequence at the time of impact to ,1880 m. New 40Ar,39Ar dates place the impact event at ,39 Ma, in the late Eocene. Haughton has an apparent crater diameter of ,23 km, with an estimated rim (final crater) diameter of ,16 km. The structure lacks a central topographic peak or peak ring, which is unusual for craters of this size. Geological mapping and sampling reveals that a series of different impactites are present at Haughton. The volumetrically dominant crater-fill impact melt breccias contain a calcite-anhydrite-silicate glass groundmass, all of which have been shown to represent impact-generated melt phases. These impactites are, therefore, stratigraphically and genetically equivalent to coherent impact melt rocks present in craters developed in crystalline targets. The crater-fill impactites provided a heat source that drove a post-impact hydrothermal system. During this time, Haughton would have represented a transient, warm, wet microbial oasis. A subsequent episode of erosion, during which time substantial amounts of impactites were removed, was followed by the deposition of intra-crater lacustrine sediments of the Haughton Formation during the Miocene. Present-day intra-crater lakes and ponds preserve a detailed paleoenvironmental record dating back to the last glaciation in the High Arctic. Modern modification of the landscape is dominated by seasonal regional glacial and niveal melting, and local periglacial processes. The impact processing of target materials improved the opportunities for colonization and has provided several present-day habitats suitable for microbial life that otherwise do not exist in the surrounding terrain. [source] Re-evaluating the age of the Haughton impact eventMETEORITICS & PLANETARY SCIENCE, Issue 12 2005Sarah C. Sherlock This reveals an Eocene age, which is at odds with the published Miocene stratigraphic, apatite fission track and Ar/Ar data; we discuss our new data within this context. We have found that the age of the Haughton impact structure is ,39 Ma, which has implications for both crater recolonization models and post-impact hydrothermal activity. Future work on the relationship between flora and fauna within the crater, and others at high latitude, may resolve this paradox. [source] An appraisal of the Serra da Cangalha impact structure using the Euler deconvolution methodMETEORITICS & PLANETARY SCIENCE, Issue 8 2005A. Adekunle ADEPELUMI The efficacy of the method has been evaluated using the aeromagnetic data obtained over the Serra da Cangalha impact crater, northeastern Brazil. The analyses of the data have provided characteristic Euler deconvolution signatures and structural indices associated with impact craters. Also, through the interpretation of the computed Euler solutions, our understanding of the structural features present around the impact structure has been enhanced. The Euler solutions obtained indicate shallow magnetic sources that are interpreted as possibly post-impact faults and a circular structure. The depth of these magnetic sources varies between 0.8 and 2.5 km, while the Precambrian basement depth was found at ,1.5 km. This is in good agreement with the estimates of the Precambrian basement depth of about 1.1 km, calculated using aeromagnetic data. The reliability of the depth solutions obtained through the implementation of the Euler method was confirmed through the use of the existing information available in the area and the result of previous studies. We find that the Euler depth solutions obtained in this study are consistent with the results obtained using other methods. [source] Origin and emplacement of the impact formations at Chicxulub, Mexico, as revealed by the ICDP deep drilling at Yaxcopoil-1 and by numerical modelingMETEORITICS & PLANETARY SCIENCE, Issue 7 2004Dieter Stöffler We present and interpret results of petrographic, mineralogical, and chemical analyses of the 1511 m deep ICDP Yaxcopoil-1 (Yax-1) drill core, with special emphasis on the impactite units. Using numerical model calculations of the formation, excavation, and dynamic modification of the Chicxulub crater, constrained by laboratory data, a model of the origin and emplacement of the impact formations of Yax-1 and of the impact structure as a whole is derived. The lower part of Yax-1 is formed by displaced Cretaceous target rocks (610 m thick), while the upper part comprises six suevite-type allochthonous breccia units (100 m thick). From the texture and composition of these lithological units and from numerical model calculations, we were able to link the seven distinct impact-induced units of Yax-1 to the corresponding successive phases of the crater formation and modification, which are as follows: 1) transient cavity formation including displacement and deposition of Cretaceous "megablocks;" 2) ground surging and mixing of impact melt and lithic clasts at the base of the ejecta curtain and deposition of the lower suevite right after the formation of the transient cavity; 3) deposition of a thin veneer of melt on top of the lower suevite and lateral transport and brecciation of this melt toward the end of the collapse of the transient cavity (brecciated impact melt rock); 4) collapse of the ejecta plume and deposition of fall-back material from the lower part of the ejecta plume to form the middle suevite near the end of the dynamic crater modification; 5) continued collapse of the ejecta plume and deposition of the upper suevite; 6) late phase of the collapse and deposition of the lower sorted suevite after interaction with the inward flowing atmosphere; 7) final phase of fall-back from the highest part of the ejecta plume and settling of melt and solid particles through the reestablished atmosphere to form the upper sorted suevite; and 8) return of the ocean into the crater after some time and minor reworking of the uppermost suevite under aquatic conditions. Our results are compatible with: a) 180 km and 100 km for the diameters of the final crater and the transient cavity of Chicxulub, respectively, as previously proposed by several authors, and b) the interpretation of Chicxulub as a peak-ring impact basin that is at the transition to a multi-ring basin. [source] Geochemistry and shock petrography of the Crow Creek Member, South Dakota, USA: Ejecta from the 74-Ma Manson impact structureMETEORITICS & PLANETARY SCIENCE, Issue 1 2004Crispin KATONGO The shocked minerals represent impact ejecta from the 74-Ma Manson impact structure (MIS). This study was aimed at determining the bulk chemical compositions and analysis of planar deformation features (PDFs) of shocked quartz; for the basal and marly units of the Crow Creek Member. We studied samples from the Gregory 84-21 core, Iroquois core and Wakonda lime quarry. Contents of siderophile elements are generally high, but due to uncertainties in the determination of Ir and uncertainties in compositional sources for Cr, Co, and Ni, we could not confirm an extraterrestrial component in the Crow Creek Member. We recovered several shocked quartz grains from basal-unit samples, mainly from the Gregory 84-21 core, and results of PDF measurements indicate shock pressures of at least 15 GPa. All the samples are composed chiefly of SiO2 (29,58 wt%), Al2O3 (6,14 wt%), and CaO (7,30 wt%). When compared to the composition of North American Shale Composite, the samples are significantly enriched in CaO, P2O5, Mn, Sr, Y, U, Cr, and Ni. The contents of rare earth elements (REE), high field strength elements (HFSE), Cr, Co, Sc, and their ratios and chemical weathering trends, reflect both felsic and basic sources for the Crow Creek Member, an inference, which is consistent with the lithological compositions in the environs of the MIS. The high chemical indices of alteration and weathering (CIA' and CIW': 75,99), coupled with the Al2O3 -(CaO*+Na2O)-K2O (A-CN'-K) ratios, indicate that the Crow Creek Member and source rocks had undergone high degrees of chemical weathering. The expected ejecta thicknesses at the sampled locations (409 to 219 km from Manson) were calculated to range from about 1.9 to 12.2 cm (for the present-day crater radius of Manson), or 0.4 to 2.4 cm (for the estimated transient cavity radius). The trend agrees with the observed thicknesses of the basal unit of the Crow Creek Member, but the actually observed thicknesses are larger than the calculated ones, indicating that not all of the basal unit comprises impact ejecta. [source] Geology and geochemistry of shallow drill cores from the Bosumtwi impact structure, GhanaMETEORITICS & PLANETARY SCIENCE, Issue 8 2003Daniel Boamah The interior of the structure is largely filled by the 8 km diameter Lake Bosumtwi, and the crater rim and region in the environs of the crater is covered by tropical rainforest, making geological studies rather difficult and restricted to road cuts and streams. In early 1999, we undertook a shallow drilling program to the north of the crater rim to determine the extent of the ejecta blanket around the crater and to obtain subsurface core samples for mineralogical, petrological, and geochemical studies of ejecta of the Bosumtwi impact structure. A variety of impactite lithologies are present, consisting of impact glassrich suevite and several types of breccia: lithic breccia of single rock type, often grading into unbrecciated rock, with the rocks being shattered more or less in situ without much relative displacement (autochthonous?), and lithic polymict breccia that apparently do not contain any glassy material (allochtonous?). The suevite cores show that melt inclusions are present throughout the whole length of the cores in the form of vesicular glasses with no significant change of abundance with depth. Twenty samples from the 7 drill cores and 4 samples from recent road cuts in the structure were studied for their geochemical characteristics to accumulate a database for impact lithologies and their erosion products present at the Bosumtwi crater. Major and trace element analyses yielded compositions similar to those of the target rocks in the area (graywacke-phyllite, shale, and granite). Graywacke-phyllite and granite dikes seem to be important contributors to the compositions of the suevite and the road cut samples (fragmentary matrix), with a minor contribution of Pepiakese granite. The results also provide information about the thickness of the fallout suevite in the northern part of the Bosumtwi structure, which was determined to be ,15 m and to occupy an area of ,1.5 km2. Present suevite distribution is likely to be caused by differential erosion and does not reflect the initial areal extent of the continuous Bosumtwi ejecta deposits. Our studies allow a comparison with the extent of the suevite at the Ries, another well-preserved impact structure. [source] Planar deformation features and impact glass in inclusions from the Vredefort Granophyre, South AfricaMETEORITICS & PLANETARY SCIENCE, Issue 6 2002P. C. Buchanan This unit contains inclusions of country rock that were derived from different locations within the impact structure and are predominantly composed of quartzite, feldspathic quartzite, arkose, and granitic material with minor proportions of shale and epidiorite. Two of the least recrystallized inclusions contain quartz with single or multiple sets of planar deformation features. Quartz grains in other inclusions display a vermicular texture, which is reminiscent of checkerboard feldspar. Feldspars range from large, twinned crystals in some inclusions to fine-grained aggregates that apparently are the product of decomposition of larger primary crystals. In rare inclusions, a mafic mineral, probably biotite or amphibole, has been transformed to very fine-grained aggregates of secondary phases that include small euhedral crystals of Fe-rich spinel. These data indicate that inclusions within the Vredefort Granophyre were exposed to shock pressures ranging from <5 to 8,30 GPa. Many of these inclusions contain small, rounded melt pockets composed of a groundmass of devitrified or metamorphosed glass containing microlites of a variety of minerals, including K-feldspar, quartz, augite, low-Ca pyroxene, and magnetite. The composition of this devitrified glass varies from inclusion to inclusion, but is generally consistent with a mixture of quartz and feldspar with minor proportions of mafic minerals. In the case of granitoid inclusions, melt pockets commonly occur at the boundaries between feldspar and quartz grains. In metasedimentary inclusions, some of these melt pockets contain remnants of partially melted feldspar grains. These melt pockets may have formed by eutectic melting caused by inclusion of these fragments in the hot (650 to 1610 °C) impact melt that crystallized to form the Vredefort Granophyre. [source] Mineralogy and petrology of melt rocks from the Popigai impact structure, SiberiaMETEORITICS & PLANETARY SCIENCE, Issue 5 2002J. Whitehead The fine-grained to cryptocrystalline texture of the more melt-rich rocks, despite their occurrence in bodies locally in excess of 800 m thick and 28 km long, suggests that the melt crystallized in response to (1) cooling by the clast load, and/or; (2) rapid nucleation on finely brecciated clasts, which have since been assimilated and/or; (3) crystallization enhanced by the relatively low water contents of the melts. Rapid crystallisation of the melt is indicated by the lack of zoning in minerals, the presence of glass, the lack of strain recovery features in clasts and the lack of evidence for fractionation in the major and trace elements, including the rare earth elements. Optical and analytical electron microscopy reveal that the previously reported division of the melt rocks into high- and low-temperature variants based on hand sample appearance, or glass content, is not warranted. Clasts within the melt-rich rocks exhibit a wide range of shock metamorphic features, though they are not distributed in the impact melts in a systematic manner. This indicates that the melt-rich rocks were well mixed during their formation, thus juxtaposing unshocked with shocked material. Injection of mesostasis melt into partially melted checkerboard plagioclase and orthopyroxene clasts also occurred during this mixing stage. [source] Clearwater East impact structure: A re-interpretation of the projectile type using new platinum-group element data from meteoritesMETEORITICS & PLANETARY SCIENCE, Issue 3 2002Iain McDonald This is at odds with recent chromium isotope analyses that suggest ordinary chondrite-type material is present. The present study reviews and reinterprets the available PGE data in the light of new PGE data from meteorites and concludes that the PGE ratios in the impact melt are most consistent with ordinary (possibly type-L) chondrite source material, not carbonaceous chondrites. Therefore the structure was most probably formed by the impact of an asteroid composed of material similar to ordinary chondrites. [source] Principal features of impact-generated hydrothermal circulation systems: mineralogical and geochemical evidenceGEOFLUIDS (ELECTRONIC), Issue 3 2005MIKHAIL V. NAUMOVArticle first published online: 14 JUL 200 Abstract Any hypervelocity impact generates a hydrothermal circulation system in resulting craters. Common characteristics of hydrothermal fluids mobilized within impact structures are considered, based on mineralogical and geochemical investigations, to date. There is similarity between the hydrothermal mineral associations in the majority of terrestrial craters; an assemblage of clay minerals,zeolites,calcite,pyrite is predominant. Combining mineralogical, geochemical, fluid inclusion, and stable isotope data, the distinctive characteristics of impact-generated hydrothermal fluids can be distinguished as follows: (i) superficial, meteoric and ground water and, possibly, products of dehydration and degassing of minerals under shock are the sources of hot water solutions; (ii) shocked target rocks are sources of the mineral components of the solutions; (iii) flow of fluids occurs mainly in the liquid state; (iv) high rates of flow are likely (10,4 to 10,3 m s,1); (v) fluids are predominantly aqueous and of low salinity; (vi) fluids are weakly alkaline to near-neutral (pH 6,8) and are supersaturated in silica during the entire hydrothermal process because of the strong predominance of shock-disordered aluminosilicates and fusion glasses in the host rocks; and (vii) variations in the properties of the circulating solutions, as well as the spatial distribution of secondary mineral assemblages are controlled by tempera ure gradients within the circulation cell and by a progressive cooling of the impact crater. Products of impact-generated hydrothermal processes are similar to the hydrothermal mineralization in volcanic areas, as well as in modern geothermal systems, but impacts are always characterized by a retrograde sequence of alteration minerals. [source] The effect of target lithology on the products of impact meltingMETEORITICS & PLANETARY SCIENCE, Issue 12 2008G. R. OSINSKI Impact events generate pressures and temperatures that can melt a substantial volume of the target; however, there remains considerable discussion as to the effect of target lithology on the generation of impact melts. Early studies showed that for impacts into crystalline targets, coherent impact melt rocks or "sheets" are formed with these rocks often displaying classic igneous structures (e.g., columnar jointing) and textures. For impact structures containing some amount of sedimentary rocks in the target sequence, a wide range of impact-generated lithologies have been described, although it has generally been suggested that impact melt is either lacking or is volumetrically minor. This is surprising given theoretical constraints, which show that as much melt should be produced during impacts into sedimentary targets. The question then arises: where has all the melt gone? The goal of this synthesis is to explore the effect of target lithology on the products of impact melting. A comparative study of the similarly sized Haughton, Mistastin, and Ries impact structures, suggests that the fundamental processes of impact melting are basically the same in sedimentary and crystalline targets, regardless of target properties. Furthermore, using advanced microbeam analytical techniques, it is apparent that, for the structures under consideration here, a large proportion of the melt is retained within the crater (as crater-fill impactites) for impacts into sedimentary-bearing target rocks. Thus, it is suggested that the basic products are genetically equivalent but they just appear different. That is, it is the textural, chemical and physical properties of the products that vary. [source] Impactites as a random medium,Using variations in physical properties to assess heterogeneity within the Bosumtwi meteorite impact craterMETEORITICS & PLANETARY SCIENCE, Issue 4-5 2007Elizabeth L'HEUREUX The damage induced by impact results in extensive fracturing and mixing of target materials. We discuss here a means of using sonic velocity and density logs from two boreholes through the Bosumtwi crater fill and basement to estimate the degree of heterogeneity and fracturing within the impacted target, in order to understand the discrepancy between the large impedances derived from the log data and the nonreflective zone of impactites observed in seismic sections. Based on an analysis of the stochastic fluctuations in the log data, the Bosumtwi impactites are characterized by vertical scale lengths of 2,3 m. From the resolution of the seismic data over the crater, horizontal scale lengths are estimated at <12 m. The impactites therefore fall within the quasi-homogeneous scattering regime, i.e., seismic energy will propagate through the medium with little disruption. Scale lengths as small as these are observed in the fractured basement rocks of impact structures, whereas non-impact related crystalline environments are characterized by scale lengths an order of magnitude larger. Assuming that the high-frequency fluctuations observed in the log data are more sensitive to fracture distribution than petrology, this suggests that the small scale lengths observed within impact structures are characteristic of impact-induced damage, and could be used to estimate the extent of fracturing undergone by the rocks at any depth below an impact structure. [source] Paleomagnetism and petrophysics of the Jänisjärvi impact structure, Russian KareliaMETEORITICS & PLANETARY SCIENCE, Issue 12 2006J. Salminen The impactites (tagamites, suevites, and lithic breccias) are characterized by increased porosity and magnetization, which is in agreement with observations performed at other impact structures. Thermomagnetic, hysteresis, and scanning electron microscope (SEM) analysis document the presence of primary multidomain titanomagnetite with additional secondary titanomaghemite and ilmenohematite. The characteristic impact-related remanent magnetization (ChRM) direction (D = 101.5°, I = 73.1°, ,95 = 6.2°) yields a pole (Lat. = 45.0°N, Long. = 76.9°E, dp = 9.9°, dm = 11.0°). Additionally, the same component is observed as an overprint on some rocks located in the vicinity of the structure, which provides proofs of its primary origin. An attempt was made to determine the ancient geomagnetic field intensity. Seven reliable results were obtained, yielding an ancient intensity of 68.7 ± 7.6 ,T (corresponding to VDM of 10.3 ± 1.1 times 1022 Am2). The intensity, however, appears to be biased toward high values mainly because of the concave shape of the Arai diagrams. The new paleomagnetic data and published isotopic ages for the structure are in disagreement. According to well-defined paleomagnetic data, two possible ages for magnetization of Jänisjärvi rocks exist: 1) Late Sveconorwegian age (900,850 Myr) or 2) Late Cambrian age (,500 Myr). However, published isotopic ages are 718 ± 5 Myr (K-Ar) and 698 ± 22 Myr (39Ar- 40Ar), but such isotopic dating methods are often ambiguous for the impactites. [source] Chesapeake Bay impact structure: Morphology, crater fill, and relevance for impact structures on MarsMETEORITICS & PLANETARY SCIENCE, Issue 10 2006J. Wright Horton Jr. It provides an accessible analog for studying impact processes in layered and wet targets on volatile-rich planets. The CBIS formed in a layered target of water, weak clastic sediments, and hard crystalline rock. The buried structure consists of a deep, filled central crater, 38 km in width, surrounded by a shallower brim known as the annular trough. The annular trough formed partly by collapse of weak sediments, which expanded the structure to ,85 km in diameter. Such extensive collapse, in addition to excavation processes, can explain the "inverted sombrero" morphology observed at some craters in layered targets. The distribution of crater-fill materials in the CBIS is related to the morphology. Suevitic breccia, including pre-resurge fallback deposits, is found in the central crater. Impact-modified sediments, formed by fluidization and collapse of water-saturated sand and silt-clay, occur in the annular trough. Allogenic sediment-clast breccia, interpreted as ocean-resurge deposits, overlies the other impactites and covers the entire crater beneath a blanket of postimpact sediments. The formation of chaotic terrains on Mars is attributed to collapse due to the release of volatiles from thick layered deposits. Some flat-floored rimless depressions with chaotic infill in these terrains are impact craters that expanded by collapse farther than expected for similar-sized complex craters in solid targets. Studies of crater materials in the CBIS provide insights into processes of crater expansion on Mars and their links to volatiles. [source] Aorounga and Gweni Fada impact structures, Chad: Remote sensing, petrography, and geochemistry of target rocksMETEORITICS & PLANETARY SCIENCE, Issue 9-10 2005Christian Koeberl We believe the results of various data treatments provide extensive new perspective on the macro-structural and topographic divisions for these two impact structures. Our remote sensing studies indicate revised diameters of Aorounga and Gweni Fada of 16 and 22 km, respectively. We selected samples from these two structures for their petrographic, geochemical, and Rb-Sr and Sm-Nd isotopic characteristics. In samples from both structures, evidence for shock metamorphism was found in the form of single or multiple sets of planar deformation features in quartz, which confirms the impact origin for both the Aorounga and Gweni Fada structures. The crystallographic orientations of PDFs indicate maximum shock levels of 20,30 GPa for samples from the central parts of both structures. The PDF orientations are characteristic for the orientations observed elsewhere in shocked sandstones, with the higher angles in the orientation histograms being fairly abundant. Geochemically, the rocks are typical upper-crustal sandstones. [source] Integrated deep drilling, coring, downhole logging, and data management in the Chicxulub Scientific Drilling Project (CSDP), MexicoMETEORITICS & PLANETARY SCIENCE, Issue 6 2004Lothar Wohlgemuth To date, a continuous scientific sampling of large impact craters from cover rocks to target material has only seldom been performed. The first project to deep-drill and core into one of the largest and well-preserved terrestrial impact structures was executed in the winter of 2001/2002 in the 65 Myr-old Chicxulub crater in Mexico using integrated coring sampling and in situ measurements. The combined use of different techniques allows a three-dimensional insight and a better understanding of impact processes. Here, we report the integration of conventional rotary drilling techniques with wireline mining coring technology that was applied to drill the 1510 m-deep Yaxcopoil-1 (Yax-1) well about 40 km southwest of Mérida, Yucatán, Mexico. During the course of the project, we recovered approximately 900 m of intact core samples including the transitions of reworked ejecta to post-impact sediments, and that one from large blocks of tilted target material to impact-generated rocks, i.e., impact melt breccias and suevites. Coring was complemented by wireline geophysical measurements to obtain a continuous set of in situ petrophysical data of the borehole walls. The data acquired is comprised of contents of a natural radioactive element, velocities of compressional sonic waves, and electrical resistivity values. All the digital data sets, including technical drilling parameters, initial scientific sample descriptions, and 360° core pictures, were distributed during the course of the operations via Internet and were stored in the ICDP Drilling Information System (http:www.icdp-online.org), serving the global community of cooperating scientists as a basic information service. [source] The importance of being cratered: The new role of meteorite impact as a normal geological processMETEORITICS & PLANETARY SCIENCE, Issue 2 2004Bevan M. French It also identifies some exciting scientific challenges for future investigators: to determine the full range of impact effects preserved on the Earth, to apply the knowledge obtained from impact phenomena to more general geological problems, and to continue the merger of the once exotic field of impact geology with mainstream geosciences. Since the recognition of an impact event at the Cretaceous-Tertiary (K-T) boundary, much current activity in impact geology has been promoted by traditionally trained geoscientists who have unexpectedly encountered impact effects in the course of their work. Their studies have involved: 1) the recognition of additional major impact effects in the geological record (the Chesapeake Bay crater, the Alamo breccia, and multiple layers of impact spherules in Precambrian rocks); and 2) the use of impact structures as laboratories to study general geological processes (e.g., igneous petrogenesis at Sudbury, Canada and Archean crustal evolution at Vredefort, South Africa). Other research areas, in which impact studies could contribute to major geoscience problems in the future, include: 1) comparative studies between low-level (,7 GPa) shock deformation of quartz, and the production of quartz cleavage, in both impact and tectonic environments; and 2) the nature, origin, and significance of bulk organic carbon ("kerogen") and other carbon species in some impact structures (Gardnos, Norway, and Sudbury, Canada). [source] Observations at terrestrial impact structures: Their utility in constraining crater formationMETEORITICS & PLANETARY SCIENCE, Issue 2 2004Richard A. F. Grieve Local geology of the target area tends to be of secondary importance, and the net result is that impacts of similar size on a given planetary body produce similar results. This is the essence of the utility of observations at impact craters, particularly terrestrial craters, in constraining impact processes. Unfortunately, there are few well-documented results from systematic contemporaneous campaigns to characterize specific terrestrial impact structures with the full spectrum of geoscientific tools available at the time. Nevertheless, observations of the terrestrial impact record have contributed substantially to fundamental properties of impact. There is a beginning of convergence and mutual testing of observations at terrestrial impact structures and the results of modeling, in particular from recent hydrocode models. The terrestrial impact record provides few constraints on models of ejecta processes beyond a confirmation of the involvement of the local substrate in ejecta lithologies and shows that Z-models are, at best, first order approximations. Observational evidence to date suggests that the formation of interior rings is an extension of the structural uplift process that occurs at smaller complex impact structures. There are, however, major observational gaps and cases, e.g., Vredefort, where current observations and hydrocode models are apparently inconsistent. It is, perhaps, time that the impact community as a whole considers documenting the existing observational and modeling knowledge gaps that are required to be filled to make the intellectual breakthroughs equivalent to those of the 1970s and 1980s, which were fueled by observations at terrestrial impact structures. Filling these knowledge gaps would likely be centered on the later stages of formation of complex and ring structures and on ejecta. [source] | ||||||||||