Home About us Contact
|
Home About us Contact | ||
|
|
||
Horizontal
Terms modified by Horizontal Selected AbstractsForeign direct investment and the dark side of decentralizationECONOMIC POLICY, Issue 49 2007Sebastian G. Kessing SUMMARY Fiscal decentralization VERTICAL, HORIZONTAL, AND FDI Both in the developed and developing world, decentralization of fiscal policy is frequently argued to foster investment, because allowing investors to choose between competing locations should make it difficult for each jurisdiction to tax the investment's returns. We point out that this ,horizontal' dimension of decentralization cannot eliminate ex post incentives to tax investments once they are irreversibly located in a jurisdiction, and that the negative ex ante investment effects of such ,hold up' problems are actually stronger when decentralization inevitably leads to multiple levels of taxation power in each location. Empirically, we detect significant negative effects on FDI of the ,vertical' dimension of decentralization, measured by the number of government layers, in a data set containing many countries and many suitable control variables. Indicators of overall fiscal decentralization do not appear to affect the investment climate negatively per se, but our theoretical arguments and empirical results suggest that policymakers should consider very carefully the form and degree of government decentralization if they aim at improving the investment climate. , Sebastian G. Kessing, Kai A. Konrad and Christos Kotsogiannis [source] Discovering Maximal Generalized Decision Rules Through Horizontal and Vertical Data ReductionCOMPUTATIONAL INTELLIGENCE, Issue 4 2001Xiaohua Hu We present a method to learn maximal generalized decision rules from databases by integrating discretization, generalization and rough set feature selection. Our method reduces the data horizontally and vertically. In the first phase, discretization and generalization are integrated and the numeric attributes are discretized into a few intervals. The primitive values of symbolic attributes are replaced by high level concepts and some obvious superfluous or irrelevant symbolic attributes are also eliminated. Horizontal reduction is accomplished by merging identical tuples after the substitution of an attribute value by its higher level value in a pre-defined concept hierarchy for symbolic attributes, or the discretization of continuous (or numeric) attributes. This phase greatly decreases the number of tuples in the database. In the second phase, a novel context-sensitive feature merit measure is used to rank the features, a subset of relevant attributes is chosen based on rough set theory and the merit values of the features. A reduced table is obtained by removing those attributes which are not in the relevant attributes subset and the data set is further reduced vertically without destroying the interdependence relationships between classes and the attributes. Then rough set-based value reduction is further performed on the reduced table and all redundant condition values are dropped. Finally, tuples in the reduced table are transformed into a set of maximal generalized decision rules. The experimental results on UCI data sets and a real market database demonstrate that our method can dramatically reduce the feature space and improve learning accuracy. [source] Determination of Gradient and Curvature Constrained Optimal PathsCOMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, Issue 1 2006Michael J. De Smith Initially, we examine the case of a single (global) gradient constraint and a planar surface, with or without boundaries and obstacles. This leads to a consideration of surface representation using rectangular lattices and procedures for determining shortest gradient-constrained paths across such surfaces. Gradient-constrained distance transforms are introduced as a new procedure to enable such optimal paths to be computed, and examples are provided for a range of landform profiles and gradients. Horizontal and vertical curvature constraints are then analyzed and incorporated into final solution paths at subsequent stages of the optimization process. Such paths may then be used as preanalyzed input to detailed cost and engineering models to speed up, and where possible improve, the quality and cost-effectiveness of route selection. [source] A graphical generalized implementation of SENSE reconstruction using MatlabCONCEPTS IN MAGNETIC RESONANCE, Issue 3 2010Hammad Omer Abstract Parallel acquisition of Magnetic Resonance Imaging (MRI) has the potential to significantly reduce the scan time. SENSE is one of the many techniques for the reconstruction of parallel MRI images. A generalized algorithm for SENSE reconstruction and theoretical background is presented. This algorithm can be used for SENSE reconstruction for any acceleration factor between 2 and 8, for any Phase Encode direction (Horizontal or Vertical), with or without Regularization. The user can select a particular type of Regularization. A GUI based implementation of the algorithm is also given. Signal-to-noise ratio, artefact power, and g -factor map are used to quantify the quality of reconstruction. The effects of different acceleration factors on these parameters are also discussed. The GUI based implementation of SENSE reconstruction provides an easy selection of various parameters needed for reconstruction of parallel MRI images and helps in an efficient reconstruction and analysis of the quality of reconstruction. © 2010 Wiley Periodicals, Inc. Concepts Magn Reson Part A 36A: 178,186, 2010. [source] Double Butterfly Suture for High Tension: A Broadly Anchored, Horizontal, Buried Interrupted SutureDERMATOLOGIC SURGERY, Issue 3 2000Helmut Breuninger MD Background. The excision of skin lesions such as tumors, nevi, and scars frequently results in tension on surgical wound margins. This tension is commonly counteracted surgically with buried, intracutaneous, interrupted sutures of absorbable material which are anchored vertically in the corium. Method. The horizontal, buried, intracutaneous butterfly suture has been described elsewhere. It is firmly anchored in the corium, everts wound margins, and adapts them nearly as broadly as two vertical sutures. It can also be laid as a double butterfly suture, as described here, and then has the shape of an "8." This double butterfly suture is equivalent to three vertical sutures because of its broad base in the corium. Moreover, it can cope with much greater tension because of its "pulley" effect. A single double butterfly suture usually suffices for small defects, particularly when the wound edges are cut obliquely with a longer rim of epidermis. Materials. We have laid the traditional butterfly suture in more than 35,000 skin lesion excisions since 1985 and the double butterfly suture alone or as a supplement in more than 10,000 sutures since 1992. We use 2-0 to 6-0 polydioxanone for these procedures, since it has proven in trials to be the best-absorbed suture material. Results. In most cases, the resulting scars were narrow and smooth in spite of high tension. Results were unsatisfactory in only 6.2% of procedures. Conclusion. The double butterfly suture described here has the advantages of withstanding tension better while everting wound margins and requiring fewer stitches for wound closure. However, it is important that the suture knot be deeply anchored beneath the corium. [source] Horizontal and vertical movements of juvenile bluefin tuna (Thunnus orientalis) in relation to seasons and oceanographic conditions in the eastern Pacific OceanFISHERIES OCEANOGRAPHY, Issue 5 2007TAKASHI KITAGAWA Abstract Electronically tagged juvenile Pacific bluefin, Thunnus orientalis, were released off Baja California in the summer of 2002. Time-series data were analyzed for 18 fish that provided a record of 380 ± 120 days (mean ± SD) of ambient water and peritoneal cavity temperatures at 120 s intervals. Geolocations of tagged fish were estimated based on light-based longitude and sea surface temperature-based latitude algorithms. The horizontal and vertical movement patterns of Pacific bluefin were examined in relation to oceanographic conditions and the occurrence of feeding events inferred from thermal fluctuations in the peritoneal cavity. In summer, fish were located primarily in the Southern California Bight and over the continental shelf of Baja California, where juvenile Pacific bluefin use the top of the water column, undertaking occasional, brief forays to depths below the thermocline. In autumn, bluefin migrated north to the waters off the Central California coast when thermal fronts form as the result of weakened equatorward wind stress. An examination of ambient and peritoneal temperatures revealed that bluefin tuna fed during this period along the frontal boundaries. In mid-winter, the bluefin returned to the Southern California Bight possibly because of strong downwelling and depletion of prey species off the Central California waters. The elevation of the mean peritoneal cavity temperature above the mean ambient water temperature increased as ambient water temperature decreased. The ability of juvenile bluefin tuna to maintain a thermal excess of 10°C occurred at ambient temperatures of 11,14°C when the fish were off the Central California coast. This suggests that the bluefin maintain peritoneal temperature by increasing heat conservation and possibly by increasing internal heat production when in cooler waters. For all of the Pacific bluefin tuna, there was a significant correlation between their mean nighttime depth and the visible disk area of the moon. [source] Uniform Head in Horizontal and Vertical WellsGROUND WATER, Issue 1 2006David R. Steward The steady-state head within a fully penetrating well may be estimated by evaluating the Thiem equation at the radius of the well. A method is presented here to extend results from the Thiem equation to horizontal wells and to partially penetrating wells. The particular model used in this investigation is based upon the analytic element method; it accurately reproduces a boundary condition of uniform head along the cylindrical surface at the perforated face of the well. This model is exercised over a representative range of parameters including the well's length, radius, and pumping rate, and the aquifer's hydraulic conductivity and thickness. Results are presented in a set of figures and tables that compare the well's drawdown to the drawdown that would have been obtained using the Thiem solution with the same pumping rate and radius. A methodology is presented to estimate the head within a horizontal or partially penetrating well by adding a correction term to results that can be readily obtained from computer models of vertical fully penetrating wells. This approach may also be used to contrast the differences in head between horizontal and vertical wells of various lengths, radii, and placement elevations. [source] A Method for Evaluating Horizontal Well Pumping TestsGROUND WATER, Issue 5 2004David E. Langseth Predicting the future performance of horizontal wells under varying pumping conditions requires estimates of basic aquifer parameters, notably transmissivity and storativity. For vertical wells, there are well-established methods for estimating these parameters, typically based on either the recovery from induced head changes in a well or from the head response in observation wells to pumping in a test well. Comparable aquifer parameter estimation methods for horizontal wells have not been presented in the ground water literature. Formation parameter estimation methods based on measurements of pressure in horizontal wells have been presented in the petroleum industry literature, but these methods have limited applicability for ground water evaluation and are based on pressure measurements in only the horizontal well borehole, rather than in observation wells. This paper presents a simple and versatile method by which pumping test procedures developed for vertical wells can be applied to horizontal well pumping tests. The method presented here uses the principle of superposition to represent the horizontal well as a series of partially penetrating vertical wells. This concept is used to estimate a distance from an observation well at which a vertical well that has the same total pumping rate as the horizontal well will produce the same drawdown as the horizontal well. This equivalent distance may then be associated with an observation well for use in pumping test algorithms and type curves developed for vertical wells. The method is shown to produce good results for confined aquifers and unconfined aquifers in the absence of delayed yield response. For unconfined aquifers, the presence of delayed yield response increases the method error. [source] Horizontal and Vertical Differentiation within Higher Education , Gender and Class PerspectivesHIGHER EDUCATION QUARTERLY, Issue 1-2 2008Caroline Berggren The study outline differences among classes and genders within higher education. Because of the expansion of places of study, higher education has lost some of its former selectivity. The matriculation of one full birth cohort into Swedish higher education was studied. The results showed that the enrolment of working- and intermediate-class women had increased, while women from the upper-middle class, also previously enrolled in higher education, had expanded their educational options becoming involved in prestigious and previously male-dominated programmes. [source] Child,parent and child,peer interaction: Observational similarities and differences at age sevenINFANT AND CHILD DEVELOPMENT, Issue 3 2005Marleen H. Gerrits Abstract According to Russell et al. (Developmental Rev 1998; 18: 313) child,parent interaction could contain horizontal qualities, similar to child,peer interactions. To study this, child,parent and child,peer play interactions were compared on several observed horizontal and vertical characteristics in 55 7-year-old children interacting with their mother, father, and a classmate, respectively. Characteristics on which the interactions were compared were shared positive emotions, total control behaviour, balance of control, simultaneous play, mutual responsiveness, and discord. Significant differences between observed child,parent and child,peer interactions were found. Horizontal as well as vertical qualities were found in both types of interaction. The child,parent interaction consisted primarily of mutual responsiveness (i.e. a horizontal quality), and total control, whereas in the child,peer interaction balance of control, shared positive emotions, simultaneous play, and discords were most often found. No main effect of peer preference or gender was found. However, several interaction effects of context with gender and peer preference were found. Copyright © 2005 John Wiley & Sons, Ltd. [source] Eyelid movements in normal human fetusesJOURNAL OF CLINICAL ULTRASOUND, Issue 6 2003Boris M. Petrikovsky MD Abstract Purpose We undertook this study to investigate the characteristics of blinking activity in healthy human fetuses. Methods Blinking activity was studied sonographically in healthy fetuses between 33 and 42 weeks' menstrual age. Horizontal and coronal sonographic views of the eye were obtained and videotaped. Fetal blinking movements were analyzed by reviewing the videotape in slow motion. Fetal vibroacoustic stimulation was also used when clinically indicated. Results We examined a total of 18 healthy fetuses. Fetal blinking was detected in 89% of cases, with a mean frequency of 6.2 movements per 60-minute observation period. Vibroacoustic stimulation was associated with increased fetal blinking in the 6 fetuses in which it was applied (mean, 15.3 movements per 60-minute observation period). Conclusions Blinking is a normal fetal activity. The increased frequency of blinking activity associated with vibroacoustic stimulation may be considered a part of the normal startle reflex. © 2003 Wiley Periodicals, Inc. J Clin Ultrasound 31:299,301, 2003 [source] The effect of retainer thickness on posterior resin-banded prostheses: a finite element studyJOURNAL OF ORAL REHABILITATION, Issue 11 2004T.-S. Lin summary, According to its design concept, a resin-bonded prosthesis, compared with the conventional fixed partial denture, is a weak and unstable structure. Therefore, a resin-bonded prosthesis induces a higher failure rate, especially in the posterior region. Recently, adhesion agents have been profoundly improved. However, the design guidelines of posterior resin-bonded prostheses (RBP) have seldom been evaluated from a biomechanical perspective. The objective of this study was to investigate the biomechanical effects of the retainer thickness on posterior RBP using the finite element method. A solid model of a posterior mandibular resin-bonded prosthesis, which employed the second molar and second premolar as the abutment teeth, was constructed and meshed with various retainer thickness (ranging from 0·2 to 1·0 mm). Horizontal and vertical loadings of 200 N were applied respectively at the central fossa of the pontic to examine the stress level at the interface between the retainer and abutment teeth. All exterior nodes in the root, below the cementoenamel junction were fixed as the boundary condition. The results showed that horizontal loading would induce higher interfacial stresses than the vertical loading which indicated that the horizontal component of the occlusal force plays a more important role in evaluating the debonding phenomenon. Further, the peak interfacial stresses increased as the retainer thickness decreased and, based on the fitted relation between retainer thickness and interfacial stresses, a 0·4 mm retainer thickness was suggested as the minimum required to prevent severe interfacial stresses increasing. [source] AN AEOLIANITE IN THE UPPER DALAN MEMBER (KHUFF FORMATION), SOUTH PARS FIELD, IRANJOURNAL OF PETROLEUM GEOLOGY, Issue 2 2010G. Frébourg A laterally continuous, 3m thick oolitic grainstone has been studied in cores from two wells from the South Pars field (offshore Iran). This high porosity but low permeability interval occurs at the top of the gas-bearing succession in the Permian Upper Dalan Member, and is equivalent to the informally-defined K4 unit of the Khuff Formation. This interval can easily be traced between the wells and overlies high-energy marine deposits. It is composed of oomouldic, fine-grained azooic grainstones with cm-thick coarser-grained layers. Horizontal to oblique lamination or steep foresets were observed together with pinstripe lamination. Petrographic observations indicate a clean oomouldic grainstone with very thin chitonic rims associated with pedogenetic imprints as first-generation cements. Later cements include early vadose meniscus and pendant cements in coarser-grained layers and pseudophreatic cements in the finer-grained material with a tighter pore network, prior to ooid dissolution. Rhizoliths were observed in cores and thin-sections. The pedogenic imprints and the early vadose cementation, both related to emergence, as well as the presence of pinstripe lamination, suggest an aeolian depositional setting. This interval is the first aeolianite recorded within the Khuff Formation or equivalent units, and the first hydrocarbon-bearing carbonate aeolianite described in a hydrocarbon-producing unit. The discovery of aeolianites has important implications for regional sequence-stratigraphic interpretations and reservoir volume calculations. These deposits do not conform to classic subaqueous sequence stratigraphy and do not record eustatic variations in the associated marine basin. Their recognition is crucial for well-to-well correlations. [source] Measurement of Horizontal and Vertical Movement of Ralstonia solanacearum in SoilJOURNAL OF PHYTOPATHOLOGY, Issue 10 2006M. Satou Abstract Two model systems were constructed to measure horizontal and vertical movement of bacteria in soil. These systems were applied to measuring movement of Ralstonia solanacearum (race 1, biovar 3), a causal agent of bacterial wilt of tomato, in andosol and sand at 28°C. The first system was used to measure horizontal movement of the bacteria in soil packed in a narrow horizontal frame. Suspension of the pathogen was applied to soil at one end of the frame, and bacterial number per gram of soil was measured over distance from the inoculation point after 4 days. Horizontal movement of R. solanacearum in supersaturated soil, but without flow, was possibly due to diffusion and the front advanced at 2.2 cm/day in andosol, and at 8.1 cm/day in sand. Using the same experimental system, but applying water inflow to one end of the frame only, the bacterium was detected at the front of water in andosol and sand. The front of the distribution advanced at 20.4 cm/h in andosol and 66.3 cm/h in sand. In the second experimental system, a cylinder of soil packed in a short tube was soaked with water, and soil at the top of the tube was inoculated with bacterial suspension. Immediately, soil cylinders were turned upward, and the bacterial number per gram of soil was measured along vertical distance from the inoculation point after 7 days. Using the system with andosol, the capillary water front rose to 32.5 cm over 7 days after inoculation, and R. solanacearum reached to 18.8 cm height. In sand, capillary water rose to 20.0 cm and the bacteria reached to 16.3 cm height. [source] Comparison of the percentage of gutta-percha-filled area obtained by Thermafil and System BAUSTRALIAN ENDODONTIC JOURNAL, Issue 2 2007G. De-Deus dds Abstract The aim of this study was to determine the percentage of gutta-percha-filled area (GPFA) obtained by Thermafil and System B techniques using light microscopy and digital image processing. Forty-five human mandibular first molars were prepared and obturated as follows: Group 1: lateral condensation (n = 15); Group 2: System B (n = 15); and Group 3: Thermafil system (n = 15). Horizontal sections were cut 4 and 6 mm from the apical foramen of each tooth. The samples were metallographically prepared and taken through photomicrographs. Using digital analysis, the cross-sectional area of the canal and the gutta-percha areas were measured. The GPFA data obtained for the three groups were analysed using the non-parametric Friedman and Wilcoxon Signed-Ranks tests. Significant differences were found between Group 3 and Group 2,Group 1. No significant difference was found between Group 2 and Group 1. The Thermafil system produced significantly higher GPFAs than lateral condensation and System B techniques (P < 0.01). This result suggests that the Thermafil system can reduce sealer and voids. [source] Erosional vs. accretionary shelf margins: the influence of margin type on deepwater sedimentation: an example from the Porcupine Basin, offshore western IrelandBASIN RESEARCH, Issue 5 2009M. C. Ryan ABSTRACT A 1000 km2 three-dimensional (3D) seismic data survey that extends out from the western margin of the Porcupine Basin, offshore western Ireland reveals the internal geometry and depositional history of a large Palaeogene (Palaeocene,Early Eocene) shelf-margin. Two wells intersect the margin thereby constraining the depositional environments. The 34/19-1 well (landward end) intersects slope, shelf, marginal marine to coastal plain facies. The 35/21-1 well (basinward end) intersects seismically imaged shelf-margin clinoforms where base of slope back up to coastal plain deposits (source-to-sink) are represented. The basin-fill stratal architecture of the Palaeogene succession reveals sediment deposition under two end member, basin physiographic styles: (1) an erosional margin style and (2) an accretionary or progradational margin style. Uplift of the western margin of the basin is suggested as the major cause of the initially oversteepened shelf-slope erosional profile. Key characteristics of an erosional margin include sediment bypass of the shelf, canyon formation, and the development of significant onlapping submarine fan deposits on the lower slope. Failure on the slope is also revealed by several mass,transport complexes (MTCs) that carve out major erosive features across the slope. Three-dimensional seismic analysis illustrates variations in size, geometry and depositional trend and transport mechanisms of the MTCs. Confined, thick chaotic seismic facies, erosional basal scours and syn-depositional thrusting (pressure ridges) at terminus as opposed to thin, high-amplitude discontinuous facies with an unconfined lobate terminus are interpreted to indicate slump- and slide-dominated vs. debris flow-dominated MTCs, respectively. The erosional margin was transformed into an accretionary margin when the gradient of the shelf-slope to basin-floor profile was sufficiently lowered through the infilling and healing of the topographic lows by the onlapping submarine-fan deposits. This shallowing of the basin allowed nearshore systems to prograde across the deepwater systems. The accretionary margin was characterised by a thick sediment prism composed of clinoforms both at the shoreface/delta (tens of metres) and shelf-margin (hundreds of metres) scales. Shelf-margin clinoforms, the focus of this study, are the fundamental regressive to transgressive building blocks (duration 10,100 kyr) of the stratigraphic succession and can be observed on a larger scale (,1 Myr) through the migration and trajectory patterns of the shelf-edge. Trajectory pathways in the accretionary margin are accretionary in a descending or ascending manner. The descending style was characterised by a shelf-slope break that migrated seawards and obliquely downwards as a result of a relative sea-level fall. The descending trajectory geometry is lobate along strike suggestive of a point source progradation. Internally, the descending trajectory consists of downward stepping, steeply dipping shelf-margin clinoforms that display extensive slumping and deposition of sediment on the lower slope indicative of rapid deposition. Furthermore, basin-floor fans and associated ,feeder' channels extend basinwards beyond toe of slope. The ascending trajectory reflects a shelf-slope break that is interpreted to have migrated seawards during steady or rising relative sea level. The ascending trajectory geometry is associated with significant lateral sediment dispersal along the shelf-edge, reflecting distributary systems that were less ,fixed' or a greater reworking and longshore drift of sediment. Accretion involving the ascending shelf-edge trajectory characteristically lacked significant basin-floor deposits. Variable ascending trajectories are recognised in this study, as read from the angle at which the shelf-slope break migrates. Horizontal to high angle ascending trajectories correspond to dominantly progradational and dominantly aggradational shelf-edge trajectories, respectively. The sequence stratigraphic analysis of the Porcupine deltaic complex reveals a long-term relative sea-level rise. [source] Position-Invariant Neural Network for Digital Pavement Crack AnalysisCOMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, Issue 2 2004Byoung Jik Lee This system includes three neural networks: (1) image-based neural network, (2) histogram-based neural network, and (3) proximity-based neural network. These three neural networks were developed to classify various crack types based on the subimages (crack tiles) rather than crack pixels in digital pavement images. These spatial neural networks were trained using artificially generated data following the Federal Highway Administration (FHWA) guidelines. The optimal architecture of each neural network was determined based on the testing results from different sets of the number of hidden units, learning coefficients, and the number of training epochs. To validate the system, actual pavement pictures taken from pavements as well as the computer-generated data were used. The proximity value is determined by computing relative distribution of crack tiles within the image. The proximity-based neural network effectively searches the patterns of various crack types in both horizontal and vertical directions while maintaining its position invariance. The final result indicates that the proximity-based neural network produced the best result with the accuracy of 95.2% despite its simplest neural network structure with the least computing requirement. [source] A cache-efficient implementation of the lattice Boltzmann method for the two-dimensional diffusion equationCONCURRENCY AND COMPUTATION: PRACTICE & EXPERIENCE, Issue 14 2004A. C. Velivelli Abstract The lattice Boltzmann method is an important technique for the numerical solution of partial differential equations because it has nearly ideal scalability on parallel computers for many applications. However, to achieve the scalability and speed potential of the lattice Boltzmann technique, the issues of data reusability in cache-based computer architectures must be addressed. Utilizing the two-dimensional diffusion equation, , this paper examines cache optimization for the lattice Boltzmann method in both serial and parallel implementations. In this study, speedups due to cache optimization were found to be 1.9,2.5 for the serial implementation and 3.6,3.8 for the parallel case in which the domain decomposition was optimized for stride-one access. In the parallel non-cached implementation, the method of domain decomposition (horizontal or vertical) used for parallelization did not significantly affect the compute time. In contrast, the cache-based implementation of the lattice Boltzmann method was significantly faster when the domain decomposition was optimized for stride-one access. Additionally, the cache-optimized lattice Boltzmann method in which the domain decomposition was optimized for stride-one access displayed superlinear scalability on all problem sizes as the number of processors was increased. Copyright © 2004 John Wiley & Sons, Ltd. [source] Prevalence of crown fractures in 8,10 years old schoolchildren in Canoas, BrazilDENTAL TRAUMATOLOGY, Issue 5 2004Maximiano Ferreira Tovo Abstract,,, The objective of this work was to evaluate the prevalence of children with crown fractures in permanent anterior teeth in 206 schoolchildren (104 girls and 102 boys) between the ages of 8 and 10 years, enrolled in three public schools in the city of Canoas, Brazil. The prevalence found was 17% with no significant difference between boys and girls, as well as between the ages. The most affected tooth was the maxillary central incisor, and a majority of the children showed only one affected tooth (88.6%). The types of fracture most commonly found were oblique and horizontal, and the portions of dental structures most affected were ,enamel only' and ,enamel and dentin'. Only seven children (20%) sought out dental treatment. [source] Postoperative discomfort associated with surgical and nonsurgical endodontic retreatmentDENTAL TRAUMATOLOGY, Issue 2 2000T. Kvist Abstract , Endodontic retreatment decision-making must include an appraisal of the costs of the different strategies proposed. In addition to direct costs, postoperative discomfort may have other consequences in terms of time off work, unscheduled visits and suffering. To establish a foundation for the appraisal of such indirect and intangible costs the present study was set up in which patients' assessments of pain and swelling after surgical and nonsurgical retreatment procedures were recorded. Ninety-two patients with 95 root-filled incisors and canine teeth exhibiting apical periodontitis were included in the study. The mode of retreatment was randomly assigned. Each day during the first post-treatment week patients assessed their degree of swelling and pain on horizontal 100-mm visual analog scales (VAS). The scales ranged from "no swelling" to "very severe swelling" and "no pain" to "intolerable pain", respectively. Consumption of self-prescribed analgesics and time off work were also recorded. Significantly more patients reported discomfort after surgical retreatment than after nonsurgical procedures. High pain scores were most frequent on the operative day while swelling reached its maximum on the first postoperative day followed by progressive decrease both in frequency and magnitude. Postoperative symptoms associated with nonsurgical retreatment were less frequent but reached high VAS values in single cases. Analgesics were significantly more often consumed after periapical surgery. Patients reported absence from work mainly due to swelling and discoloration of the skin. This was found to occur only after surgical retreatment. Conclusively, surgical retreatment resulted in more discomfort and tended to bring about greater indirect costs than nonsurgical retreatment. [source] A non-canonical photopigment, melanopsin, is expressed in the differentiating ganglion, horizontal, and bipolar cells of the chicken retinaDEVELOPMENTAL DYNAMICS, Issue 3 2005Sayuri Tomonari Abstract Vertebrate melanopsin is a photopigment in the eye, required for photoentrainment. Melanopsin is more closely related to opsin proteins found in invertebrates, than to the other photo-pigments. Although the invertebrate melanopsin-like protein is localized in rhabdomeric photoreceptors in the invertebrate eye, it has been shown to be expressed in a subset of retinal ganglion cells in the mouse and in horizontal cells in the frog, indicating its diversified expression pattern in vertebrates. Here we show that two types of melanopsin transcripts are expressed in the developing chicken retina. Melanopsin is firstly expressed by a small subset of ganglion cells, and then prominently expressed by horizontal cells and later by bipolar cells in the developing chicken retina. This suggests that a subset of ganglion, horizontal, and bipolar cells in the chicken retina may have rhabdomeric properties in their origins. Developmental Dynamics 234:783,790, 2005. © 2005 Wiley-Liss, Inc. [source] Influence of parental deprivation on the behavioral development in Octodon degus: Modulation by maternal vocalizationsDEVELOPMENTAL PSYCHOBIOLOGY, Issue 3 2003Katharina Braun Abstract Repeated separation from the family during very early stages of life is a stressful emotional experience which induces a variety of neuronal and synaptic changes in limbic cortical areas that may be related to behavioral alterations. First, we investigated whether repeated parental separation and handling, without separation from the family, leads to altered spontaneous exploratory behavior in a novel environment (open field test) in 8-day-old Octodon degus. Second, we tested whether the parentally deprived and handled animals display different stimulus-evoked exploratory behaviors in a modified open field version, in which a positive emotional stimulus, the maternal call, was presented. In the open field test a significant influence of previous emotional experience was found for the parameters of running, rearing, and vocalization. Parentally deprived degus displayed increased horizontal (running) and vertical (rearing) motoric activities, but decreased vocalization, compared to normal and handled controls. The presentation of maternal vocalizations significantly modified running, vocalization, and grooming activities, which in the case of running activity was dependent on previous emotional experience. Both deprivation-induced locomotor hyperactivity together with the reduced behavioral response towards a familiar acoustic emotional signal are similar to behavioral disturbances observed in human attachment disorders. © 2003 Wiley Periodicals, Inc. Dev Psychobiol 42: 237,245, 2003. [source] Negative per capita effects of purple loosestrife and reed canary grass on plant diversity of wetland communitiesDIVERSITY AND DISTRIBUTIONS, Issue 4 2006Shon S. Schooler ABSTRACT Invasive plants can simplify plant community structure, alter ecosystem processes and undermine the ecosystem services that we derive from biotic diversity. Two invasive plants, purple loosestrife (Lythrum salicaria) and reed canary grass (Phalaris arundinacea), are becoming the dominant species in many wetlands across temperate North America. We used a horizontal, observational study to estimate per capita effects (PCEs) of purple loosestrife and reed canary grass on plant diversity in 24 wetland communities in the Pacific Northwest, USA. Four measures of diversity were used: the number of species (S), evenness of relative abundance (J), the Shannon,Wiener index (H,) and Simpson's index (D). We show that (1) the PCEs on biotic diversity were similar for both invasive species among the four measures of diversity we examined; (2) the relationship between plant diversity and invasive plant abundance ranges from linear (constant slope) to negative exponential (variable slope), the latter signifying that the PCEs are density-dependent; (3) the PCEs were density-dependent for measures of diversity sensitive to the number of species (S, H,, D) but not for the measure that relied solely upon relative abundance (J); and (4) invader abundance was not correlated with other potential influences on biodiversity (hydrology, soils, topography). These results indicate that both species are capable of reducing plant community diversity, and management strategies need to consider the simultaneous control of multiple species if the goal is to maintain diverse plant communities. [source] High resolution quantification of gully erosion in upland peatlands at the landscape scaleEARTH SURFACE PROCESSES AND LANDFORMS, Issue 8 2010Martin Evans Abstract The upland peatlands of the UK are severely eroded, with large areas affected by gully erosion. The peatlands are important areas of carbon storage and provide a range of other ecosystem services including water supply and biodiversity all of which are negatively impacted by erosion of the upland surface. The magnitude of the gully erosion, and consequent adjustment of the peatland morphology, is such that in degraded peatlands the extent and magnitude of erosion is a major control on peatland function. Accurate mapping of gully form is therefore a necessary precondition to the understanding and management of these systems. This paper develops an approach to extracting gully maps from high resolution digital elevation models (DEMs). Gully maps of the Bleaklow Plateau in northern England were derived from a 2,m LiDAR DEM by combining areas of low difference from mean elevation and high positive plan curvature. Gully depth was modelled by interpolating between gully edges. Testing of the gully mapping and depth modelling against aerial photography, manual interpretation of the DEM and ground survey revealed that gully plan form is well represented and gully width and depth are modelled with tolerances close to the horizontal and vertical resolution of the LiDAR imagery. Estimates of gully width and depth were less reliable for gullies with total width of less than four pixels. The approach allows for the first time the derivation of accurate estimates of gully extent and magnitude over large areas and provides the basis for modelling a range of processes controlled by gullying. The approach has wider applicability to mapping gully erosion in a wide range of environments. Copyright © 2010 John Wiley & Sons, Ltd. [source] The use of GIS-based digital morphometric techniques in the study of cockpit karstEARTH SURFACE PROCESSES AND LANDFORMS, Issue 2 2007P. Lyew-Ayee Abstract Cockpit karst landscapes are among the most distinctive landscapes in the world, and have been the focus of long-standing scientific interest. Early researchers used largely descriptive techniques to categorize the terrain, and subsequent work has not attempted to critically re-evaluate descriptions of landscapes using more sophisticated methods. The distinctive surface topography of cockpit karst areas can be characterized in order to compare them with other karst as well as non-karst areas, and to determine geological and/or climatic conditions that are responsible for the observed terrain. Process models of the rate of karst denudation or evolution can only be accurate if the contemporary morphology of the landscape is quantitatively and unambiguously defined. A detailed analysis of cockpit karst terrain is carried out using the latest GIS-based digital morphometric techniques in order to assess the nature of such terrain and provide further information for subsequent modelling, as well as other non-geomorphological applications, such as environmental management and conservation issues. The paper presents the methodology used for the digital analysis of terrain and landforms in the distinctive Cockpit Country area of Jamaica and its environs. The results indicate that cockpit karst may be categorized based on its vertical, horizontal and shape characteristics, as well as by looking at the semivariogram, slope characteristics, and landscape relief scale, which combine measures of vertical and horizontal scales. Copyright © 2006 John Wiley & Sons, Ltd. [source] Flume experiments on the horizontal stream offset by strike-slip faultsEARTH SURFACE PROCESSES AND LANDFORMS, Issue 2 2004Shunji OuchiArticle first published online: 4 FEB 200 Abstract Flume experiments, in which the middle section of an erosion channel is displaced horizontally, have been conducted to assess the response of streams to horizontal displacement by a strike-slip fault. The experimental erosion channel was developed in a mixture of sand and clay, which provided relatively stable banks with its cohesiveness. Horizontal displacement of a strike-slip fault perpendicular to the channel is expected to add a ,at section to its longitudinal pro,le along the fault line. The experimental stream eliminated this ,at section with downstream degradation, upstream aggradation, and lateral channel shift. As a result, a roughly continuous longitudinal pro,le was maintained. This maintenance of a continuous longitudinal pro,le along channel is considered to be the principle of stream response to horizontal displacement by a strike-slip fault. Downstream degradation was the dominant process of this stream response in the overall tendency of erosion without sand supply. When the rate of fault displacement was low (long recurrence interval), the experimental stream eroded the fault surface, jutting laterally into the channel like a scarp, and de,ected the channel within the recurrence interval. This lateral channel shift gave some gradient to the reach created by fault displacement (offset reach), and the downstream degradation occurred as much as completing the remaining longitudinal pro,le adjustment. When the rate of fault displacement was high (short recurrence interval), the lateral erosion on the ,rst fault surface was interrupted by the next fault displacement. The displacement was then added incrementally to the existing channel offset making channel shift by lateral erosion increasingly dif,cult. The channel offset with sharp bends persisted without much modi,cation, and downstream degradation and upstream aggradation became evident with the effect of the offset channel course, which worked like a dam. In this case, a slight local convexity, which was incidentally formed by downstream degradation and upstream aggradation, tended to remain in the roughly continuous longitudinal pro,le, as long as the horizontal channel offset persisted. In either case, once the experimental stream obtained a roughly continuous gradient, further channel adjustment seemed to halt. Horizontal channel offset remained to a greater or lesser extent at the end of each run long after the last fault displacement. Copyright © 2004 John Wiley & Sons, Ltd. [source] Aeolian dust dynamics in agricultural land areas in Lower Saxony, GermanyEARTH SURFACE PROCESSES AND LANDFORMS, Issue 7 2001Dirk Goossens Abstract The dynamics of fine aeolian dust emitted from agricultural land was investigated over 15 months near Grönheim, Lower Saxony, Germany. The following aspects were studied: airborne dust concentration, the ratio of mineral versus organic dust, the vertical distribution of the particles in the atmosphere, horizontal and vertically integrated horizontal dust flux, vertical dust flux, dust deposition at ground level, grain-size distribution of the mineral dust component, and vertical distribution of organic matter in the dust. Standard meteorological parameters (wind speed and direction, precipitation) were measured as well. Dust activity in Grönheim is high in spring (March,May) and autumn (October,November) and low to very low during the rest of the year. There is a strong relationship between the periods of tillage and the intensity of dust activity. Also, there is high dust activity during wind erosion events. For the year 1999, dust emission due to tillage was 6·6 times higher than dust emission due to wind erosion. A dust transport of 15·8 ton km,1 a,1 was calculated for the first 10 m of the atmosphere in 1999. Total dust transport (in the entire mixing layer) was estimated between 16 and 20 ton km,1 a,1. About 25,30 per cent of this dust is mineral dust, emitted from the fields during tillage or during wind erosion events. In spring and autumn there is a strong vertical stratification in the airborne sediment, with much (coarse) dust in the lower air layers and significantly less (and finer) dust at higher altitudes. In summer and winter, when there is no local dust production, there is no stratification: equal amounts of dust are transported at all heights. The stratification in spring and autumn is exclusively caused by the mineral part of the dust. The organic particles are much better mixed in the atmosphere because of their lower density. Copyright © 2001 John Wiley & Sons, Ltd. [source] Computational fluid dynamics modelling of boundary roughness in gravel-bed rivers: an investigation of the effects of random variability in bed elevationEARTH SURFACE PROCESSES AND LANDFORMS, Issue 4 2001A.P. Nicholas Abstract Results from a series of numerical simulations of two-dimensional open-channel flow, conducted using the computational fluid dynamics (CFD) code FLUENT, are compared with data quantifying the mean and turbulent characteristics of open-channel flow over two contrasting gravel beds. Boundary roughness effects are represented using both the conventional wall function approach and a random elevation model that simulates the effects of supra-grid-scale roughness elements (e.g. particle clusters and small bedforms). Results obtained using the random elevation model are characterized by a peak in turbulent kinetic energy located well above the bed (typically at y/h,=,0·1,0·3). This is consistent with the field data and in contrast to the results obtained using the wall function approach for which maximum turbulent kinetic energy levels occur at the bed. Use of the random elevation model to represent supra-grid-scale roughness also allows a reduction in the height of the near-bed mesh cell and therefore offers some potential to overcome problems experienced by the wall function approach in flows characterized by high relative roughness. Despite these benefits, the results of simulations conducted using the random elevation model are sensitive to the horizontal and vertical mesh resolution. Increasing the horizontal mesh resolution results in an increase in the near-bed velocity gradient and turbulent kinetic energy, effectively roughening the bed. Varying the vertical resolution of the mesh has little effect on simulated mean velocity profiles, but results in substantial changes to the shape of the turbulent kinetic energy profile. These findings have significant implications for the application of CFD within natural gravel-bed channels, particularly with regard to issues of topographic data collection, roughness parameterization and the derivation of mesh-independent solutions. Copyright © 2001 John Wiley & Sons, Ltd. [source] Dynamic stiffness of deep foundations with inclined pilesEARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS, Issue 12 2010L. A. Padrón Abstract The influence of inclined piles on the dynamic response of deep foundations and superstructures is still not well understood and needs further research. For this reason, impedance functions of deep foundations with inclined piles, obtained numerically from a boundary element,finite element coupling model, are provided in this paper. More precisely, vertical, horizontal, rocking and horizontal,rocking crossed dynamic stiffness and damping functions of single inclined piles and 2 × 2 and 3 × 3 pile groups with battered elements are presented in a set of plots. The soil is assumed to be a homogeneous viscoelastic isotropic half-space and the piles are modeled as elastic compressible Euler,Bernoulli beams. The results for different pile group configurations, pile,soil stiffness ratios and rake angles are presented. Copyright © 2010 John Wiley & Sons, Ltd. [source] Investigation of the sliding behavior between steel and mortar for seismic applications in structuresEARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS, Issue 12 2009Jason McCormick Abstract The friction developed between a steel base plate and a mortar base contributes shear resistance to the building system during a seismic event. In order to investigate the possible sliding behavior between the base plate and the mortar, a shake table study is undertaken using a large rigid mass supported by steel contact elements which rest on mortar surfaces connected to the shake table. Horizontal input accelerations are considered at various magnitudes and frequencies. The results provide a constant friction coefficient during sliding with an average value of approximately 0.78. A theoretical formulation of the friction behavior is also undertaken. The theoretical equations show that the sliding behavior is dependent on the ratio of the friction force to the input force. The addition of vertical accelerations to the system further complicates the sliding behavior as a result of the varying normal force. This results in a variable friction resistance which is a function of the amplitude, phase, and frequency of the horizontal and vertical input motions. In general, this study showed a consistent and reliable sliding behavior between steel and mortar. Copyright © 2009 John Wiley & Sons, Ltd. [source] | ||||||||||||||||||||||||||||||||||||||||||||||||||||