Home About us Contact
|
Home About us Contact | ||
|
|
||
Gel Chemistry (gel + chemistry)
Selected AbstractsDielectric Properties of a Printed Sol,Gel Matrix Composite,ADVANCED ENGINEERING MATERIALS, Issue 5 2010Tobias Lehnert Low temperature processable materials with high dielectric constants are required for application on flexible organic substrates, for example, in printed electronics. To date, mainly organic polymers with embedded functional particles have been investigated for this purpose. For the first time, we present a printable dielectric composite material composed of ferroelectric high permittivity particles (BaTiO3) bonded by a mainly inorganic sol,gel derived network. The exemplary optimization of the properties by varying the sol,gel precursor illustrates the potential of sol,gel chemistry for printable functional materials. An operational gravure printed capacitor including printed silver electrodes is presented. The measured dielectric constants are among the highest reported in literature for low temperature cured films with moderate dissipation factors. Besides these promising dielectric properties, this composite film shows a ferroelectric response. [source] Supercritical-Fluid-Assisted One-Pot Synthesis of Biocompatible Core(, -Fe2O3)/Shell(SiO2) Nanoparticles as High Relaxivity T2 -Contrast Agents for Magnetic Resonance ImagingADVANCED FUNCTIONAL MATERIALS, Issue 14 2009Elena Taboada Abstract Monodisperse iron oxide/microporous silica core/shell composite nanoparticles, core(, -Fe2O3)/shell(SiO2), with a diameter of approximately 100,nm and a high magnetization are synthesized by combining sol,gel chemistry and supercritical fluid technology. This one-step processing method, which is easily scalable, allows quick fabrication of materials with controlled properties and in high yield. The particles have a specific magnetic moment (per kg of iron) comparable to that of the bulk maghemite and show superparamagnetic behavior at room temperature. The nanocomposites are proven to be useful as T2 MRI imaging agent. They also have potential to be used in NMR proximity sensing, theranostic drug delivery, and bioseparation. [source] Synthesis of high fluorescent silica hybrid materials by immobilization of orange peel extract in silica-silsesquioxane matrixJOURNAL OF PHYSICAL ORGANIC CHEMISTRY, Issue 11 2009I. Lacatusu Abstract Sol,gel chemistry can be easily modified to the changing needs of society to produce fine-tuned sol,gel nanostructured materials for relevant applications. In this context, there is an increasing need for natural and versatile raw materials as well as biocompatible compounds that could be extensively used as biomarkers for bioimaging in diagnosis or therapy. Silica-based materials are widely used in the field of biomedicine due to their chemical inertness and biocompatibility. In the present paper, orange peel extract was immobilized inside inorganic silica and hybrid silica-silsesquioxane polymeric networks. Silica and organo-modified silica matrices were synthesized through a templated sol,gel route of TEOS and an organosilsesquioxane (octaisobutyltetracyclo[7.3.3.15,11] octasiloxane- endo -3,7-diol), with D -glucose as template, and for comparison a non-ionic surfactant (tetraethylene glycol mono-hexadecyl ether) was also used. The bioactive properties of the molecules from orange peel extract were preserved after immobilization in both silica and silica-silsesquioxane networks. Moreover, the fluorescence properties were amplified by 10,20 times more than the native orange peel extract. The structural properties of the final materials have been studied by FT-IR, UV,Vis-NIR, and fluorescence spectroscopy. Dynamic light scattering measurements and transmission electron microscopy were used to estimate the size and morphology of the hybrid materials with orange peel extract immobilized in silica networks. Copyright © 2009 John Wiley & Sons, Ltd. [source] Mesostructured Silica for Optical Functionality, Nanomachines, and Drug DeliveryJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 2009Yaroslav Klichko Silica thin films and nanoparticles prepared using sol,gel chemistry are derivatized with active molecules to generate new functional materials. The mild conditions associated with sol,gel processing allow for the incorporation of a range of dopants including organic or inorganic dyes, biomolecules, surfactants, and molecular machines. Silica nanoparticles embedded with inorganic nanocrystals, and films containing living cells have also been synthesized. Silica templated with surfactants to create mesostructure contains physically and chemically different regions that can be selectively derivatized using defined techniques to create dynamic materials. Using two different techniques, donor,acceptor pairs can be doped into separated regions simultaneously and photo-induced electron transfer between the molecules can be measured. Mesoporous silica materials are also useful supports for molecular machines. Machines including snap-tops and nanoimpellers that are designed to control the release of guest molecules trapped within the pores are described. Mesoporous silica nanoparticles are promising materials for drug delivery and other biomedical applications because they are nontoxic and can be taken up by living cells. Through appropriate design and synthesis, multifunctional mesoporous silica nanoparticles for sophisticated bio-applications are created. [source] Silica Reinforced Organic,Inorganic Hybrid Polyurethane Nanocomposites From Sustainable ResourceMACROMOLECULAR CHEMISTRY AND PHYSICS, Issue 4 2010Deewan Akram Abstract Polyol/nanosilica organic,inorganic hybrids (Si/Lpol) were prepared through facile sol,gel chemistry. Tetraethoxyorthosilane (TEOS) and linseed polyol (Lpol) obtained by hydroxylation of linseed oil were used as inorganic and organic precursors, respectively. Si/Lpol was further treated with toluene-2,4-diisocyanate (TDI) to obtain silica embedded polyurethane (Si/LPU). The structure of the organic,inorganic hybrid was confirmed by FTIR, 1H NMR, and 13C NMR spectral analysis. The polyol/nanosilica network shows strong interaction with the remnant polyol backbone through hydrogen bonding, which also has bearing on Tg of polymers. Morphological studies of Si/LPU show the formation of uniform, spherical silica nanoparticles of 2,30,nm size embedded in the polymer matrix. Si/LPU was further reinforced with 2 and 5,wt.-% fumed silica (FS-Si/LPUs); their morphology revealed a carpet layer formation on top of Si/LPU. Thermogravimetric analysis showed improved thermal stability of Si/LPU and FS-Si/LPUs. The polymers exhibit mild to moderate antibacterial behavior against E. coli and S. aureus, respectively, and will pave way in plethora of biological and chemical applications as coating materials. [source] Oligomeric Alkoxysilanes with Cagelike Hybrids as Cores: Designed Precursors of Nanohybrid MaterialsCHEMISTRY - AN ASIAN JOURNAL, Issue 3 2008Hideki Kuge Abstract Well-defined alkoxysilane oligomers containing a cagelike carbosiloxane core were synthesized and used as novel building blocks for the formation of siloxane-based hybrid networks. These oligomers were synthesized from the cagelike trimer derived from bis(triethoxysilyl)methane by silylation with mono-, di-, and triethoxychlorosilanes ((EtO)nMe3,nSiCl, n=1, 2, and 3). Hybrid xerogels were prepared by hydrolysis and polycondensation of these oligomers under acidic conditions. The structures of the products varied depending on the number of alkoxy groups (n). When n=2 and 3, microporous xerogels (BET surface areas of 820 and 510,m2,g,1, respectively) were obtained, whereas a nonporous xerogel was obtained when n=1. 29Si,NMR spectroscopic analysis suggested that partial rearrangement of the siloxane networks, which accompanied the cleavage of the Si,O,Si linkages, occurred during the polycondensation processes. By using an amphiphilic triblock copolymer surfactant as a structure-directing agent, hybrid thin films with a 2D hexagonal mesostructure were obtained when n=2 and 3. These results provide important insight into the rational synthesis of molecularly designed hybrid materials by sol,gel chemistry. [source] | |||||||||||||