Home About us Contact
|
Home About us Contact | ||
|
|
||
Ethanol Productivity (ethanol + productivity)
Selected AbstractsGeneration of the improved recombinant xylose-utilizing Saccharomyces cerevisiae TMB 3400 by random mutagenesis and physiological comparison with Pichia stipitis CBS 6054FEMS YEAST RESEARCH, Issue 3 2003C.Fredrik Wahlbom Abstract The recombinant xylose-utilizing Saccharomyces cerevisiae TMB 3399 was constructed by chromosomal integration of the genes encoding d -xylose reductase (XR), xylitol dehydrogenase (XDH), and xylulokinase (XK). S. cerevisiae TMB 3399 was subjected to chemical mutagenesis with ethyl methanesulfonate and, after enrichment, 33 mutants were selected for improved growth on d -xylose and carbon dioxide formation in Durham tubes. The best-performing mutant was called S. cerevisiae TMB 3400. The novel, recombinant S. cerevisiae strains were compared with Pichia stipitis CBS 6054 through cultivation under aerobic, oxygen-limited, and anaerobic conditions in a defined mineral medium using only d -xylose as carbon and energy source. The mutation led to a more than five-fold increase in maximum specific growth rate, from 0.0255 h,1 for S. cerevisiae TMB 3399 to 0.14 h,1 for S. cerevisiae TMB 3400, whereas P. stipitis grew at a maximum specific growth rate of 0.44 h,1. All yeast strains formed ethanol only under oxygen-limited and anaerobic conditions. The ethanol yields and maximum specific ethanol productivities during oxygen limitation were 0.21, 0.25, and 0.30 g ethanol g xylose,1 and 0.001, 0.10, and 0.16 g ethanol g biomass,1 h,1 for S. cerevisiae TMB 3399, TMB 3400, and P. stipitis CBS 6054, respectively. The xylitol yield under oxygen-limited and anaerobic conditions was two-fold higher for S. cerevisiae TMB 3399 than for TMB 3400, but the glycerol yield was higher for TMB 3400. The specific activity, in U mg protein,1, was higher for XDH than for XR in both S. cerevisiae TMB 3399 and TMB 3400, while P. stipitis CBS 6054 showed the opposite relation. S. cerevisiae TMB 3400 displayed higher specific XR, XDH and XK activities than TMB 3399. Hence, we have demonstrated that a combination of metabolic engineering and random mutagenesis was successful to generate a superior, xylose-utilizing S. cerevisiae, and uncovered distinctive physiological properties of the mutant. [source] Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activitiesJOURNAL OF CHEMICAL TECHNOLOGY & BIOTECHNOLOGY, Issue 10 2002Yoshitoshi Nakamura Abstract In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40,gm,3 and an ozonation time of 30,min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15,h,1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry [source] Liquid,liquid extraction of fermentation inhibiting compounds in lignocellulose hydrolysateBIOTECHNOLOGY & BIOENGINEERING, Issue 5 2009R.R.M. Zautsen Abstract Several compounds that are formed or released during hydrolysis of lignocellulosic biomass inhibit the fermentation of the hydrolysate. The use of a liquid extractive agent is suggested as a method for removal of these fermentation inhibitors. The method can be applied before or during the fermentation. For a series of alkanes and alcohols, partition coefficients were measured at low concentrations of the inhibiting compounds furfural, hydroxymethyl furfural, vanillin, syringaldehyde, coniferyl aldehyde, acetic acid, as well as for ethanol as the fermentation product. Carbon dioxide production was measured during fermentation in the presence of each organic solvent to indicate its biocompatibility. The feasibility of extractive fermentation of hydrolysate was investigated by ethanolic glucose fermentation in synthetic medium containing several concentrations of furfural and vanillin and in the presence of decanol, oleyl alcohol and oleic acid. Volumetric ethanol productivity with 6 g/L vanillin in the medium increased twofold with 30% volume oleyl alcohol. Decanol showed interesting extractive properties for most fermentation inhibiting compounds, but it is not suitable for in situ application due to its poor biocompatibility. Biotechnol. Bioeng. 2009;102: 1354,1360. © 2008 Wiley Periodicals, Inc. [source] Comparison of glucose/xylose cofermentation of poplar hydrolysates processed by different pretreatment technologiesBIOTECHNOLOGY PROGRESS, Issue 2 2009Yulin Lu Abstract The inhibitory effects of furfural and acetic acid on the fermentation of xylose and glucose to ethanol in YEPDX medium by a recombinant Saccharomyces cerevisiae strain (LNH-ST 424A) were investigated. Initial furfural concentrations below 5 g/L caused negligible inhibition to glucose and xylose consumption rates in batch fermentations with high inoculum (4.5,6.0 g/L). At higher initial furfural concentrations (10,15 g/L) the inhibition became significant with xylose consumption rates especially affected. Interactive inhibition between acetic acid and pH were observed and quantified, and the results suggested the importance of conditioning the pH of hydrolysates for optimal fermentation performance. Poplar biomass pretreated by various CAFI processes (dilute acid, AFEX, ARP, SO2 -catalyzed steam explosion, and controlled-pH) under respective optimal conditions was enzymatically hydrolyzed, and the mixed sugar streams in the hydrolysates were fermented. The 5-hydroxymethyl furfural (HMF) and furfural concentrations were low in all hydrolysates and did not pose negative effects on fermentation. Maximum ethanol productivity showed that 0,6.2 g/L initial acetic acid does not substantially affect the ethanol fermentation with proper pH adjustment, confirming the results from rich media fermentations with reagent grade sugars. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009 [source] Bioreactor Coupled with Electromagnetic Field Generator: Effects of Extremely Low Frequency Electromagnetic Fields on Ethanol Production by SaccharomycescerevisiaeBIOTECHNOLOGY PROGRESS, Issue 5 2007Victor H. Perez The effect of extremely low frequency (ELF) magnetic fields on ethanol production by Saccharomyces cerevisiae using sugar cane molasses was studied during batch fermentation. The cellular suspension from the fermentor was externally recycled through a stainless steel tube inserted in two magnetic field generators, and consequently, the ethanol production was intensified. Two magnetic field generators were coupled to the bioreactor, which were operated conveniently in simple or combined ways. Therefore, the recycle velocity and intensity of the magnetic field varied in a range of 0.6,1.4 m s,1 and 5,20 mT, respectively. However, under the best conditions with the magnetic field treatment (0.9,1.2 m s,1 and 20 mT plus solenoid), the overall volumetric ethanol productivity was approximately 17% higher than in the control experiment. These results made it possible to verify the effectiveness of the dynamic magnetic treatment since the fermentations with magnetic treatment reached their final stage in less time, i.e., approximately 2 h earlier, when compared with the control experiment. [source] Optimization of Fed-Batch Saccharomyces cerevisiae Fermentation Using Dynamic Flux Balance ModelsBIOTECHNOLOGY PROGRESS, Issue 5 2006Jared L. Hjersted We developed a dynamic flux balance model for fed-batch Saccharomyces cerevisiae fermentation that couples a detailed steady-state description of primary carbon metabolism with dynamic mass balances on key extracellular species. Model-based dynamic optimization is performed to determine fed-batch operating policies that maximize ethanol productivity and/or ethanol yield on glucose. The initial volume and glucose concentrations, the feed flow rate and dissolved oxygen concentration profiles, and the final batch time are treated as decision variables in the dynamic optimization problem. Optimal solutions are generated to analyze the tradeoff between maximal productivity and yield objectives. We find that for both cases the prediction of a microaerobic region is significant. The optimization results are sensitive to network model parameters for the growth associated maintenance and P/O ratio. The results of our computational study motivate continued development of dynamic flux balance models and further exploration of their application to productivity optimization in biochemical reactors. [source] | ||||||||||