Home About us Contact
|
Home About us Contact | ||
|
|
||
Equipment Used (equipment + used)
Selected AbstractsLaboratory simulation of clast abrasionEARTH SURFACE PROCESSES AND LANDFORMS, Issue 2 2002J. Lewin Abstract Experimental abrasion of river-bed materials has been widely undertaken, producing ,downstream' fining rates that generally are believed to be much less than those observed in the field. A conclusion commonly adopted has been that sorting processes are more effective than abrasion processes. A comparative evaluation of results from an abrasion tank and a tumbling barrel are presented, which show that abrasion patterns and rates differ according to the equipment used, clast size and shape, the clast charge (barrel) and water velocity and bed material (tank). Abrasion is a composite process, and the effects achieved appear to be dominated by percussion in the tank and grinding in the barrel. Breakage, crushing and sandblasting are not modelled effectively, nor are effects achieved on clasts when they form part of the bed. Comparisons are made with other equipment used, the very limited amount of direct field abrasion monitoring, and with the probable suite of processes that may occur under field conditions. Also reviewed are the problems that arise when laboratory weight-loss abrasion coefficients are used or converted into ones of size diminution, as usually derived from field observations of down-channel trends. It is concluded that field abrasion rates generally have been underestimated, as the processes involved are at best only selectively represented by the experimental equipment so far used, and because the results obtained experimentally are capable of misinterpretation when related to field trends. Copyright © 2002 John Wiley & Sons, Ltd. [source] Hybrid platform for high-tech equipment protection against earthquake and microvibrationEARTHQUAKE ENGINEERING AND STRUCTURAL DYNAMICS, Issue 8 2006Y. L. Xu Abstract To ensure the high quality of ultra-precision products such as semiconductors and optical microscopes, high-tech equipment used to make these products requires a normal working environment with extremely limited vibration. Some of high-tech industry centres are also located in seismic zones: the safety of high-tech equipment during an earthquake event becomes a critical issue. It is thus imperative to find an effective way to ensure the functionality of high-tech equipment against microvibration and to protect high-tech equipment from damage when earthquake events occur. This paper explores the possibility of using a hybrid platform to mitigate two types of vibration. The hybrid platform, on which high-tech equipment is installed, is designed to work as a passive isolation platform to abate mainly acceleration response of high-tech equipment during an earthquake and to function as an actively controlled platform to reduce mainly velocity response of high-tech equipment under normal working condition. To examine the performance of the hybrid platform, the analytical model of a coupled hybrid platform and building system incorporating with magnetostrictive actuators is established. The simulation results obtained by applying the analytical model to a high-tech facility indicate that the proposed hybrid platform is feasible and effective. Copyright © 2006 John Wiley & Sons, Ltd. [source] The Battle of Chester and Warfare in Post-Roman BritainHISTORY, Issue 318 2010SEAN DAVIES Archaeological work at Heronbridge near Chester has recently uncovered the earliest identifiable site of a major British battlefield and investigated a related seventh-century fortification on the site. This article uses the new evidence to help interpret the battle of Chester's political background, the make-up of the forces on the day, their motivations, the equipment used and the course of the conflict, suggesting that the construction of the remarkable fortification was a key factor in the decision to engage in a battle that contravened the usual tactical principles of the age. The clash is set in the wider context of warfare in post-Roman Europe, providing insights into the development of both the Anglo-Saxon and British kingdoms that had emerged in the former imperial province of Britannia. [source] Effects of virtual lighting on visual performance and eye fatigueHUMAN FACTORS AND ERGONOMICS IN MANUFACTURING & SERVICE INDUSTRIES, Issue 2 2002Vincent G. Duffy This study is designed to determine whether differences in eye fatigue and visual performance can be shown under varying virtual industrial lighting conditions. It is based on the results of studies of more traditional video display terminal (VDT) tasks reported in the literature. One experiment was designed to determine if the effects of virtual lighting on eye fatigue and visual performance in a simulated virtual industrial environment are similar to some other VDT tasks with varying luminance contrast. Results of a test of 20 participants in a vigilance task show that there is a significant difference in performance and eye fatigue in the virtual environment with varying virtual light conditions. These results may help designers see that performance in some virtual "lighting" conditions, for some tasks, is consistent with that in the real. However, due to the difficulties of determining the appropriate virtual objects to be considered for the luminance measures, additional research is needed to be able to generalize the results to other industrial training scenarios. A second experiment was intended to test for the luminance decrement in a VDT that was shown in recent literature. The results would have potential implications for the experiment that included a vigilance task. However, the results showed that the luminance decrement demonstrated in recent literature did not occur. These results suggest that the equipment used in the present experiments should not cause difficulty in interpreting the results of the vigilance task. © 2002 Wiley Periodicals, Inc. [source] Computational energy analysis of an innovative isothermal chamber for testing of the special equipment used in the transport of perishable productsINTERNATIONAL JOURNAL OF ENERGY RESEARCH, Issue 10 2004S. K. Chatzidakis Abstract This paper describes an improved numerical simulation study of an isothermal chamber recently constructed at Zografou Campus of the National Technical University of Athens (NTUA) for the testing of special equipment used for transporting perishable foodstuffs in accordance with the United Nations ATP agreement. Using a transient finite difference model, a simulation is developed for a modern ATP test chamber and a typical specimen refrigerated vehicle to be tested. The simulation results are compared to experimental measurements taken under real conditions by a data acquisition system and a refrigerated semi-trailer as specimen. Proportional,integral control is employed for the regulation of the cooling and heating system. The impact of various parameters on the time required to reach the set-point temperature (tset) is investigated and the energy consumption is simulated for a period of 22 h. In particular, the impact of specimen insulation thickness and the thickness of the chamber insulation floor are considered in detail. The total energy consumption increases by approximately 16% when the concrete floor layer thickness is increased from 8 to 16 cm for typical initial conditions and desired chamber and specimen temperatures of 32.5 and 7.5°C, respectively. Using a floor insulation of 6 cm extruded heavy strain-resistant polystyrene reduces the energy consumption by at least 13%. Specimen insulation thickness increase from U -value of 0.35 W m,2 K to 0.75 W m,2 K result to an increase in energy consumption by a percentage of 28%. Thermal capacity, temperature of car body and specimen dimensions are also treated as variables that affect the total duration of an ATP test and its total energy consumption. Copyright © 2004 John Wiley & Sons, Ltd. [source] Nurses' knowledge of error in blood pressure measurement techniqueINTERNATIONAL JOURNAL OF NURSING PRACTICE, Issue 3 2002BHScArticle first published online: 27 MAY 200, DipAppSci(NsgEdn), Robin S Armstrong RN Errors in measuring blood pressure may have significant impact on the investigation and treatment of patients. Errors arise from faults in measurement technique or the equipment used. In Australia, blood pressure measurement technique is taught to nurses during their undergraduate education and may not be reviewed again. This observational, descriptive study surveyed clinical nurses at a metropolitan teaching hospital at shift hand-over time. Participation was voluntary and anonymous by 78 nurses who answered a questionnaire to determine the need and focus for updating blood pressure measurement technique. Sixty-one per cent of participants conformed to currently accepted practice in identifying systolic blood pressure, and 71% diastolic blood pressure; 54% correctly interpreted a description of blood pressure sounds containing an auscultatory gap. Correct answers for assessment of faulty equipment were given by 58%, assessing cuff size by 57%, arm position for seated measurement by 14%, determination of inflation pressure by 29% and deflation rate 62%. Incidence of terminal digit preference was 32%. These findings indicate that knowledge of participants was inadequate to perform blood pressure measurement in a standardized manner, and prevent introduced error. [source] SOME PHYSICOMECHANICAL AND NUTRITIONAL PROPERTIES OF BARBERRY (BERBERIS VULGARIS L.) FRUITSJOURNAL OF FOOD PROCESS ENGINEERING, Issue 4 2009MEHMET AKBULUT ABSTRACT The barberry (Berberis vulgaris L.) fruits growing wild in Turkey were analyzed for some physical (dimensions, geometric mean diameter, sphericity, bulk density, fruit density, volume, terminal velocity, hardness and porosity) and chemical (moisture, reducing sugar, ascorbic acid, total anthocyanin and phenolics, crude protein, crude oil, crude energy, crude fiber, ash, pH, acidity, alcohol-soluble extract and color) properties. Mineral content of barberry fruits growing wild in Turkey was determined by inductively coupled plasma-atomic emission spectrometry. The average pulp mass ratio, thickness, width, length, mass, volume, geometric mean diameter, sphericity and projected area were measured as 75.59%, 3.51 mm, 3.32 mm, 7.69 mm, 0.07 g, 71 mm3, 4.46 mm, and 0.58 and 0.2535 cm2, respectively. The energy, reducing sugar, protein, cellulose, oil, ash, acidity, ascorbic acid, total phenolics, total anthocyanin and soluble solid matter values of barberry fruits were established as 69.25 kcal/g, 6.52%, 10.32%, 9.42%, 0.84%, 1.12%, 3.10%, 256.48 mg/kg, 789.32 mg/100 g, 931.05 mg/kg and 19.4%, respectively. It is very important to evaluate the technological properties of equipment used in harvesting, transportation, storage and processing of fresh fruits. Also, the information supplied on the proximate composition of the barberry fruit is highly beneficial for human nutrition. PRACTICAL APPLICATIONS The chemical properties such as ascorbic acid, anthocyanin and phenolic compounds, reducing sugar, crude protein, crude fiber, crude oil, ash and mineral contents of barberry fruits are mostly important for human nutrition and processing. In addition, it is very important to establish the physical properties of equipment used in harvesting, transportation, storage and processing of fresh fruits. However, further studies are necessary to understand the physical properties for equipment design and to provide necessary information for the use of wild edible fruits. [source] A NEW METHOD FOR ELLAGIC ACID PRODUCTION FROM POMEGRANATE HUSKJOURNAL OF FOOD PROCESS ENGINEERING, Issue 4 2008JINGJING LU ABSTRACT Pomegranate (Punica granatum L.) husk, a by-product of the pomegranate juice industry, is an inexpensive and abundant source of ellagic acid. Ellagic acid is widely used as functional food for its physiological functions. It is the breakdown product of ellagitannins. To date, the preparation of ellagic acid from pomegranate husk has not been reported. This article reports a new process for ellagic acid production from pomegranate husk by extraction of tannins followed by acid hydrolysis and purification by extraction and recrystallization. Several tests were conducted to obtain optimum conditions including extraction of tannins by varying solvents, acid concentration and reaction time for acid hydrolysis and the volume of methanol used for purification. Ellagic acid (3.5 g) with 90% purity from 100 g pomegranate husk was obtained. This new method is easy to scale up. All equipment used in this production process is widely used in food processing industry. The cost of production is low. It is suitable for industrial applications. PRACTICAL APPLICATIONS The production of ellagic acid is easier and the yield and purity of ellagic acid produced this way are higher than before. This method can be used not only for experiment in laboratory but also for industrial applications. The material , pomegranate husk , is a by-product of the pomegranate juice industry, so it is very cheap and easy to get. High-purity ellagic acid produced this way is sold to many companies back home and abroad. It is used as food additive and cosmetic material because of its antioxidant activity and whiteningfunction. The toxicity of pomegranate husk is lower than that of gallnut, which has been the main material of ellagic acid production in the past. Reagents are common and inexpensive; some of them are reusable. [source] Inclusion of Blended Lipid Solutions as Functional Ingredients to Alter the Fatty Acid Profile of Beef PattiesJOURNAL OF FOOD SCIENCE, Issue 7 2010A.C. Lowder Abstract:, Beef patties formulated to contain beef fat, plant oil, and a rosemary extract to increase unsaturated fatty acid content and maintain desirable sensory attributes were compared to control beef patties formulated without plant oils. Treatment patties were formulated to a fat content of 10% or 20% by combining beef trimmings (6% fat) with 4% or 14% addition of a lipid blend. Blends contained 57% beef tallow, 0.3% rosemary extract, and 43% of high oleic safflower oil (SO), olive oil (OO), or corn oil (CO). Lipid oxidation, as measured by TBA values, of treatment patties were similar to control patties after 0 and 3 d of refrigerated (2 °C) storage and up to 56 d of frozen (,10 °C) storage. Cooked lipid blend patties having a fat content of 10% or 20% were similar to or higher than control patties for juiciness and were no different for other sensory attributes evaluated. At fat levels of 10% or 20%, oleic acid (18: 1) in cooked SO patties (46.1% and 50.3%, respectively) and OO patties (43.8% and 48.1%, respectively) was higher than the control (37.3% and 37.6%, respectively). Unsaturated to saturated fatty acid ratios at the 10% or 20% fat levels were higher in SO (1.37 and 1.60, respectively) and CO (1.40 and 1.48, respectively) patties than the control (0.97 and 0.94, respectively). Beef patties manufactured with varying lipid blends increased unsaturated fatty acid content and were similar in physical characteristics and sensory attributes of all beef patties formulated without lipid blends. Practical Application:, The development of healthier beef products that will be more appealing to consumers has long been an industry goal. The authors believe that lipid blends such as the one used in this study could be used to create such products, not only in the form of beef patties, but any number of processed meat products. Because the materials and equipment used to create the lipid blends in this study are widely available, their incorporation into meat products would represent a small capital investment. This is an important factor in bringing a reasonably priced, healthier product to consumers. [source] A branch-and-cut algorithm for the quay crane scheduling problem in a container terminalNAVAL RESEARCH LOGISTICS: AN INTERNATIONAL JOURNAL, Issue 1 2006Luigi Moccia Abstract The quay crane scheduling problem consists of determining a sequence of unloading and loading movements for cranes assigned to a vessel in order to minimize the vessel completion time as well as the crane idle times. Idle times originate from interferences between cranes since these roll on the same rails and a minimum safety distance must be maintained between them. The productivity of container terminals is often measured in terms of the time necessary to load and unload vessels by quay cranes, which are the most important and expensive equipment used in ports. We formulate the quay crane scheduling problem as a vehicle routing problem with side constraints, including precedence relationships between vertices. For small size instances our formulation can be solved by CPLEX. For larger ones we have developed a branch-and-cut algorithm incorporating several families of valid inequalities, which exploit the precedence constraints between vertices. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006 [source] The Influence of Knowledge Accumulation on Buyer-Supplier Codevelopment ProjectsTHE JOURNAL OF PRODUCT INNOVATION MANAGEMENT, Issue 5 2003Melissa M. Appleyard This article investigates innovation across a supply chain and considers how knowledge accumulation as a consequence of buyer-supplier codevelopment projects can influence the projects' specifications. The setting is the semiconductor industry, and the players are chip producers who cooperate with their suppliers to modify their manufacturing equipment used to produce new semiconductor devices. Two detailed case studies were undertaken to determine the tradeoffs encountered by the buyer and supplier when setting the parameters that govern codevelopment projects. The findings from the case studies inform a conceptual framework that outlines the net payoffs to buyers when deciding whether to "make" or "buy" their production equipment. If buyers pursue the "make" option, they then have to decide the degree to which they sponsor modifications tailored to their production processes or modifications more generally applicable across the industry. More generally applicable modifications likely would prompt suppliers to invest relatively more in follow-on knowledge creation for upgrades and field support while leading to lower equipment costs due to economies of scale from larger production runs of the new equipment. The framework suggests that when making this sequence of decisions, an innovative buyer also weighs the importance of codevelopment for securing intellectual property rights, guaranteeing early access to new equipment enabling early product launch, and achieving high production yields quickly due to "previewing" the equipment. The conceptual framework leads to a multi-period model that focuses on the importance of knowledge accumulation for project parameterization. As captured by the model, buyers may prefer generally applicable modifications to customized ones, because generally applicable modifications may lead to greater knowledge accumulation at the supplier. This knowledge accumulation may be either "embodied" in equipment upgrades or "unembodied" in improved field support. In addition to shaping the nature of particular codevelopment projects, knowledge accumulation also may have profound implications for long-run industry structure. As seen in the semiconductor industry, knowledge accumulation at equipment suppliers has contributed to the rise of contract manufacturers, because these manufacturers can outfit their production facilities with equipment that embodies the accumulated knowledge. These findings suggest that for both short-run and long-run reasons, the dynamics of knowledge accumulation merit thorough attention when members of a supply chain cooperate during the course of new product development. [source] Population modelling of the effect of inogatran, at thrombin inhibitor, on ex vivo coagulation time (APTT) in healthy subjects and patients with coronary artery diseaseBRITISH JOURNAL OF CLINICAL PHARMACOLOGY, Issue 1 2001Marie Cullberg Aims, The purpose of this study was to characterize the relationship between the degree of anticoagulation, assessed by APTT, and the plasma concentration of inogatran in healthy subjects and in patients with coronary artery disease. Methods, Data from five phase I studies in 78 healthy males and two phase II multicentre studies in 948 patients of both sexes with unstable angina pectoris or non-Q-wave myocardial infarction were evaluated. A total of 3296 pairs of concentration-APTT samples were obtained before, during, and after intravenous infusions of inogatran. Mixed effects modelling was used for population pharmacodynamic analysis of the drug effect and for describing the variability in baseline APTT. Results, The population mean baseline APTT was 29 s, but large variations between individuals (s.d. 3.6 s) were observed. The variability between studies (1.3 s) and centres (1.8 s) were of less importance, though statistically significant. APTT increased in a nonlinear manner with increasing inogatran concentration and the relationship was well described by a combined linear and Emax model. A significant part of the overall variability could be ascribed to the APTT reagent and equipment used at the different study centres. These method-dependent differences were compensated for by including the lower limit of the normal reference range as a covariate, affecting both baseline and Emax, in the model. For the typical healthy subject and patient, the method-corrected population mean parameters were: APTTbaseline 35 and 31 s, slope 8.0 and 5.8 s l µmol,1, Emax 36 and 34 s, and EC50 0.54 and 0.72 µmol l,1, respectively. The model predicted plasma concentration needed to double the APTT from the baseline value was 1.25 and 1.45 µmol l,1 in the healthy volunteer and patient, respectively. Conclusions, The nonlinear relationship between APTT and inogatran concentration in plasma was well described by a combined linear and Emax model. Pooling of data was made possible by incorporating a centre-specific characteristic of the assay method in the model. Patients had lower baseline APTT and appeared to have less pronounced effect of inogatran than young healthy subjects. [source] Pulsed dye laser vs. intense pulsed light for port-wine stains: a randomized side-by-side trial with blinded response evaluationBRITISH JOURNAL OF DERMATOLOGY, Issue 2 2009A. Faurschou Summary Background, Pulsed dye lasers (PDLs) are considered the treatment of choice for port-wine stains (PWS). Studies have suggested broadband intense pulsed light (IPL) to be efficient as well. So far, no studies have directly compared the PDL with IPL in a randomized clinical trial. Objectives, To compare efficacy and adverse events of PDL and IPL in an intraindividual randomized clinical trial. Methods, Twenty patients with PWS (face, trunk, extremities; pink, red and purple colours; skin types I,III) received one side-by-side treatment with PDL (V-beam Perfecta, 595 nm, 0·45,1·5 ms; Candela Laser Corporation, Wayland, MA, U.S.A.) and IPL (StarLux, Lux G prototype handpiece, 500,670 and 870,1400 nm, 5,10 ms; Palomar Medical Technologies, Burlington, MA, U.S.A.). Settings depended on the preoperative lesional colour. Treatment outcome was evaluated by blinded, clinical evaluations and by skin reflectance measurements. Results, Both PDL and IPL lightened PWS. Median clinical improvements were significantly better for PDL (65%) than IPL (30%) (P = 0·0004). A higher proportion of patients obtained good or excellent clearance rates with the PDL (75%) compared with IPL (30%) (P = 0·0104). Skin reflectance also documented better results after PDL (33% lightening) than IPL (12% lightening) (P = 0·002). Eighteen of 20 patients preferred to receive continued treatments with PDL (P = 0·0004). No adverse events were observed with PDL or IPL. Conclusions, Both the specific PDL and IPL types of equipment used in this study lightened PWS and both were safe with no adverse events. However, the PDL conveyed the advantages of better efficacy and higher patient preference. [source] | ||||||||||||||||