Home About us Contact
|
Home About us Contact | ||
|
|
||
Electrode Surface (electrode + surface)
Kinds of Electrode Surface Selected AbstractsDouble Modification of Electrode Surface for the Selective Detection of Epinephrine and Its Application to Flow Injection Amperometric AnalysisELECTROANALYSIS, Issue 22 2009Guang-Ri Xu Abstract A glassy carbon electrode having two polymer layers has been applied to selectively detect epinephrine. The inner layer formed by electropolymerization of macrocyclic nickel complex functioned as an electrocatalyst for epinephrine oxidation and the outer layer composed of hydrolyzed polyurethane ,-benzyl L -glutamate as a screening layer. Differential pulse voltammetry showed almost 100% recovery of epinephrine even in 100-fold excess of interferents. When applied to a dual glassy carbon electrode as an amperometric detector in flow injection analysis, a linear response over 0.1,,M and 10,,M was obtained. Recovery tested for 5-fold diluted human urine samples was 97.5%. [source] Dramatic Effects of Ionic Liquid on Platinum Electrode Surface and Electron-Transfer Rates of meso -TetraphenylporphyrinsELECTROANALYSIS, Issue 12 2006Afsaneh Safavi Abstract The effect of addition of a room temperature ionic liquid, 1-butyl-3-methyl imidazolium hexafluorophosphate [bmim][PF6], on the electrochemical behavior of different free-base para-substituted meso -tetraphenylporphyrins in dichloromethane solution has been studied using cyclic voltammetric technique. It has been found that the ionic liquid has the ability to regenerate platinum electrode surface and improves the reversibility of electrode processes. This has been true for the case of all the porphyrins studied. [source] Interaction of Flavin Adenine Dinucleotide (FAD) with a Glassy Carbon Electrode SurfaceCHEMISTRY & BIODIVERSITY, Issue 8 2008Haizhen Wei Abstract The interaction of flavin adenine dinucleotide (FAD) with a glassy carbon electrode (GCE) surface was investigated in terms of the FAD adsorption thermodynamics and kinetics, the subsequent electroreduction mechanism, and the corresponding electron-transfer rate. The kinetics of FAD electroreduction at the GCE was found to be an adsorption-controlled process. A set of electroreduction kinetic parameters was calculated: the true number of electrons involved in the FAD reduction, n=1.76, the apparent transfer coefficient, ,app=0.41, and the apparent heterogeneous electron-transfer rate constant, kapp=1.4,s,1. The deviation of the number of exchanged electrons from the theoretical value for the complete reduction of FAD to FADH2 (n=2) indicates that a small portion of FAD goes to a semiquinone state during the redox process. The FAD adsorption was well described by the Langmuir adsorption isotherm. The large negative apparent Gibbs energy of adsorption (,Gads=,39.7 ±0.4,kJmol,1) indicated a highly spontaneous and strong adsorption of FAD on the GCE. The energetics of the adsorption process was found to be independent of the electrode surface charge in the electrochemical double-layer region. The kinetics of FAD adsorption was modeled using a pseudo -first-order kinetic model. [source] Tris(2,2,-bipyridyl)ruthenium(II) Electrogenerated Chemiluminescence Sensor Based on Platinized Carbon Nanotube,Zirconia,Nafion Composite FilmsELECTROANALYSIS, Issue 12 2010Hyun Yoon Abstract Mesoporous films of platinized carbon nanotube,zirconia,Nafion composite have been used for the immobilization of tris(2,2,-bipyridyl)ruthenium (II) (Ru(bpy)32+) on an electrode surface to yield a solid-state electrogenerated chemiluminescence (ECL) sensor. The composite films of Pt,CNT,zirconia,Nafion exhibit much larger pore diameter (3.55,nm) than that of Nafion (2.82,nm) and thus leading to much larger ECL response for tripropylamine (TPA) because of the fast diffusion of the analyte within the films. Due to the conducting and electrocatalytic features of CNTs and Pt nanoparticles, their incorporation into the zirconia,Nafion composite films resulted in the decreased electron transfer resistance within the films. The present ECL sensor based on the Pt,CNT,zirconia,Nafion gave a linear response (R2=0.999) for TPA concentration from 3.0,nM to 1.0,mM with a remarkable detection limit (S/N=3) of 1.0,nM, which is much lower compared to those obtained with the ECL sensors based on other types of sol-gel ceramic,Nafion composite films such as silica,Nafion and titania,Nafion. [source] Stripping Voltammetry at Microdisk Electrode Arrays: TheoryELECTROANALYSIS, Issue 24 2009Abstract Anodic stripping voltammetry (ASV) is an extremely powerful tool for detection of metal ions in solution through a two step process of preconcentration of the metal at the electrode surface, followed by electrodissolution. The second phase produces an electroanalytical response proportional to the amount of material deposited in the first phase. This paper utilizes theory to explore the electrochemical signals produced when considering ASV at a microelectrode or ultramicroelectrode arrays. The theory outlined is applicable mostly to thin mercury film absorption and metal adsorption. [source] Real Time Electrochemical Monitoring of DNA/PNA Dissociation by Melting Curve AnalysisELECTROANALYSIS, Issue 14 2009Xiaoteng Luo Abstract An immobilization-free electrochemical method is reported for real-time monitoring of the DNA hybrid dissociation between a ferrocene labeled peptide nucleic acid (PNA) and a fully-complementary or single-base-mismatched DNA. This method takes advantages of electrostatic charge characteristics and interactions among the neutrally charged PNA, the negatively charged DNA and the negatively charged electrode surface made of indium tin oxide (ITO). When a ferrocene labeled PNA (Fc-PNA) sequence is hybridized to a complementary DNA strand, electrostatic repulsion between the negatively charged PNA/DNA hybrid and the negative ITO surface retards the diffusion of the electroactive Fc to the electrode, resulting in a much reduced electrochemical signal. On the other hand, when the Fc-PNA is dissociated from the hybrid at elevated temperatures, the neutrally charged Fc-PNA easily diffuses to the electrode with an enhanced electrochemical signal. Therefore, an electrochemical melting curve of the Fc-PNA/DNA hybrid can be obtained by measuring the Fc signal with the increasing temperature. This strategy allows monitoring of the dissociation of the DNA hybrid in real time, which might lead to a simple detection method for single nucleotide polymorphism (SNP) analysis. [source] Voltammetric Antioxidant Analysis in Mineral Oil Samples Immobilized into Boron-Doped Diamond Micropore Array ElectrodesELECTROANALYSIS, Issue 12 2009Xiaohang Zhang Abstract Mineral oil microdroplets containing the model antioxidant N,N -didodecyl- N,,N, -diethyl-phenylene-diamine (DDPD) are immobilized into a 100×100 pore-array (ca. 10,,m individual pore diameter, 100,,m pitch) in a boron-doped diamond electrode surface. The robust diamond surface allows pore filling, cleaning, and reuse without damage to the electrode surface. The electrode is immersed into aqueous electrolyte media, and voltammetric responses for the oxidation of DDPD are obtained. In order to further improve the current responses, 20,wt% of carbon nanofibers are co-deposited with the oil into the pore array. Voltammetric signals are consistent with the oxidation of DDPD and the associated transfer of perchlorate anions (in aqueous 0.1,M NaClO4) or the transfer of protons (in aqueous 0.1,M HClO4). From the magnitude of the current response, the DDPD content in the mineral oil can be determined down to less than 1,wt% levels. Perhaps surprisingly, the reversible (or midpoint) potential for the DDPD oxidation in mineral oil (when immersed in 0.1 NaClO4) is shown to be concentration-dependent and to shift to more positive potential values for more dilute DDPD in mineral oil solutions. An extraction mechanism and the formation of a separate organic product phase are proposed to explain this behavior. [source] Electrochemical Study of Anionic Ferrocene Derivatives Intercalated in Layered Double Hydroxides: Application to Glucose Amperometric BiosensorsELECTROANALYSIS, Issue 3-5 2009Christine Mousty Abstract Layered double hydroxides (Zn2Cr(OH)6X,nH2O LDH) containing (3-sulfopropyl)ferrocene-carboxylate (FcPSO3) and 1,1,-bis(3-sulfopropyl)ferrocene-carboxylate (Fc(PSO3)2) as interlayer anions (X) have been prepared by the co-precipitation method and characterized by PXRD, FTIR, SEM and XPS. The electrochemical behavior of these hybrid materials has been evaluated by cyclic voltammetry. A new amperometric biosensor based on the immobilization of glucose oxidase in ZnCr-FcPSO3 hybrid material was presented, the intercalated anions playing the role of mediators that shuttle electrons between the FAD centers in the enzyme and the electrode surface. The performance of the resulting biosensor for glucose determination under anaerobic conditions was evaluated by chronoamperometry at 0.5,V. The sensitivity (65,mA M,1 cm,2) determined in the concentration range 10,25,,M is higher than sensitivities reported for other glucose biosensors based on LDH host matrices. [source] Alkanethiols Modified Gold Electrodes for Selective Detection of Molecules with Different Polarity and Molecular Size.ELECTROANALYSIS, Issue 3-5 2009Application to Vitamin B2 Analysis Abstract The cyclic voltammetry behavior of several molecules with different polarity and molecular size on gold electrodes modified with nonfunctionalized alkanethiols of different chain length, usually employed as chromatographic stationary phases, are studied. The redox systems hexacyanoferrate(II/III), ferrocene/ferrocine and hydroquinone/quinone are chosen as template molecules. As modifiers, ethanethiol, 1-octanethiol and di- n -octadecyldisulfide are selected. We can conclude that polar molecules can reach the electrode surface through channels created by the modifiers. However, when nonpolar compounds are analyzed, the nonpolar interactions between the analyte and the terminal group of the modifier lead to retention of the compound, retarding its arrival to the electrode surface. A molecule with polar and nonpolar part was used for the application of this conclusion. If the gold electrode is modified with di- n -octadecyldisulfide, the electrochemical behavior of vitamin B2 becomes simpler than that observed on a bare one. This result allows a sensitive and selective procedure to be developed for direct determination of vitamin B2 in pharmaceutical formulations. [source] Preparation, Electrochemistry, and Electrocatalytic Activity of Lead Pentacyanonitrosylferrate Film Immobilized on Carbon Ceramic ElectrodeELECTROANALYSIS, Issue 21 2008H. Razmi Abstract Lead pentacyanonitrosylferrate (PbPCNF), a new Prussian blue analog, was immobilized on the surface of a carbon ceramic electrode (CCE) prepared by sol-gel method. The immobilization process consists of adding a certain amount of metallic lead to the electrode matrix before gelation, and chemical derivatization of Pb on the electrode surface to a PbPCNF solid film by immersing the electrode in a solution of sodium pentacyanonitrosylferrate (PCNF). The composition of the synthesized PbPCNF was characterized by FTIR, scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) techniques. The resulting modified electrode showed electroactivity at two redox centers. The electrochemical behavior of the PbPCNF modified carbon ceramic electrode (PbPCNF|CCE) was studied by cyclic voltammetry. Under optimized conditions the peak-to-peak separation is only 39,mV, indicative of a surface reaction. Ion effects of the supporting electrolyte suggest that cations have a considerable effect on the electrochemical behavior of the modified electrode. The transfer coefficient (,) and the charge transfer rate constant at the modifying film|electrode interface (ks) were calculated. The electrocatalytic activity of the modified electrode toward the electro-reduction of peroxodisulfate was studied in details. [source] Electrochemical Characteristics of Mediated Laccase-Catalysis and Electrochemical Detection of Environmental PollutantsELECTROANALYSIS, Issue 8 2008Ying Liu Abstract Laccase has been immobilized on the carbon nanotubes modified glassy carbon electrode surface by adsorption. As-prepared laccase retains good electrocatalytic activity to oxygen reduction by using 2,2,-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) as the mediator. It can be used as a biosensor for the determination of catechol with broad linear range. Especially, azide, one of inhibitors of laccase, shows sensitive inhibition to catalytic activity of the laccase modified electrode. In addition, the inhibition by fluoride ions has also been studied. These demonstrate that the as-prepared electrode can be used to detect halide and some the toxic pollutants, e.g., catechol and azide based on catalytic or inhibition reaction of laccase. The simple preparation procedure makes the system can be developed as non-inhibition or inhibition biosensor. [source] Working Electrodes from Amalgam Paste for Electrochemical MeasurementsELECTROANALYSIS, Issue 4 2008Bogdan Yosypchuk Abstract Paste electrode with paste amalgam as an active electrode material is described here for the first time. Designed electrode from silver paste amalgam (AgA-PE) is solely metallic and does not contain any organic binder. Mechanical surface regeneration of AgA-PE is performed in the same way as for classical carbon paste electrodes and reproducibility of such regeneration is about 10%. Electrochemical surface regeneration appeared very efficient for most measurements. In dependence on paste metal content, the electrode surface can be liquid (resembling a film) or rather solid. The hydrogen overvoltage on AgA-PE is high, and the electrode allows measurements at highly negative potentials. AgA-PE is well suited for study of reduction or oxidation processes without an accumulation step. Anodic stripping voltammetry of some metals tested on the electrode is influenced by formation of intermetallic compounds. The measurement based on cathodic stripping voltammetry (adenine, cysteine) and on catalytic processes from adsorbed state (complex of osmium tetroxide with 2,2,-bipyridine) can be performed on AgA-PE practically under the same conditions as found earlier for HMDE and for silver solid amalgam electrode. The working electrode from paste amalgam combines the advantages of paste and metal electrodes. [source] Voltammetric Determination of Mercury(II) at Poly(3-hexylthiophene) Film Electrode.ELECTROANALYSIS, Issue 24 2007Effect of Halide Ions Abstract The well-known method for the determination of mercury(II), which is based on the anodic stripping voltammetry of mercury(II), has been adapted for applications at the thin film poly(3-hexylthiophene) polymer electrode. Halide ions have been found to increase the sensitivity of the mercury response and shift it more positive potentials. This behavior is explained by formation of mercuric halide which can be easily deposited and stripped from the polymer electrode surface. The procedure was optimized for mercury determination. For 120,s accumulation time, detection limit of 5,ng mL,1 mercury(II) has been observed. The relative standard deviation is 1.3% at 40,ng mL,1 mercury(II). The performance of the polymer film studied in this work was evaluated in the presence of surfactants and some potential interfering metal ions such as cadmium, lead, copper and nickel. [source] Electrochemical Immunoassay for Carbohydrate Antigen-125 Based on Polythionine and Gold Hollow Microspheres Modified Glassy Carbon ElectrodesELECTROANALYSIS, Issue 17 2007Xiao-Hong Fu Abstract A new electrochemical immunosensor for the detection of carbohydrate antigen-125 (CA125), a carcinoma antigen, was developed by immobilization CA125 antibody (anti-CA125) on gold hollow microspheres and porous polythionine (PTH) modified glassy carbon electrodes (GCE). The gold hollow microspheres provided a biocompatible microenvironment for proteins, and greatly amplified the coverage of anti-CA125 molecules on the electrode surface. The performance and factors influencing the immunosensor were investigated in detail. The detection is based on the current change before and after the antigen-antibody interaction. Under optimal conditions, the amperometric changes were proportional to CA125 concentration ranging from 4.5 to 36.5,U/mL with a detection limit of 1.3,U/mL (at 3,). The CA125 immunosensor exhibited good precision, high sensitivity, acceptable stability, accuracy and reproducibility. The as-prepared immunosensors were used to analyze CA125 in human serum specimens. Analytical results suggest that the developed immunoassay has a promising alternative approach for detecting CA125 in the clinical diagnosis. [source] Voltammetry as an Alternative Tool for Trace Metal Detection in Peloid Marine SedimentsELECTROANALYSIS, Issue 13 2007Irena Ciglene Abstract Here was demonstrated for the first time a possible application of abrasive stripping voltammetry in the direct measurement of trace metals in anoxic, sulfidic marine sediments (peloid mud) from a small and shallow (0.2,1,m) marine lagoon in Central Dalmatia, Croatia. Trace amounts of sample compounds are transferred to the graphite electrode surface and electrochemical reduction or oxidation processes are followed by the cyclic voltammetry in seawater or 0.55,M NaCl as electrolyte. After a preelectrolysis at potentials ranging from ,1.0 to ,1.5,V (vs. SCE) a well-defined anodic stripping peak corresponding to the oxidation of metal deposits generated at deposition potentials is obtained around ,0.74,V (vs. SCE). The same samples were studied by anodic stripping voltammetry at the Hg electrode and inductively coupled plasma-mass spectrometer (ICP-MS). ICP-MS showed higher concentrations of trace metals such as Al, Fe, Mo, Mn. A relatively high concentration of reduced sulfur species (RSS) (10,3 M) is determined electrochemically in porewater of the peloid mud, indicating that the magnitude of metal enrichment in the sediments is probably controlled by precipitation with sulfide. [source] Voltammetric Sensor for Sodium Nitroprusside Determination in Biological Fluids Using Films of Poly- L -LysineELECTROANALYSIS, Issue 9 2007Claudece Pereira, Francisco Abstract Sodium nitroprusside (NP), a commercial vasodilator, can be pre-concentrated on vitreous carbon electrode modified by films of 97.5%: 2.5% poly- L -lysine (PLL): glutaraldehyde (GA). This coating gives acceptable anion exchange properties whilst giving the required improvement of adhesion to the glassy carbon electrode surface. Linear response range and detection limit on nitroprusside in B-R buffer pH,4.0, were 1×10,6 to 2×10,5 mol L,1 and 1×10,7 mol L,1, respectively. The repeatability of the proposed sensor, evaluated in term of relative standard deviation, was measured as 4.1% for 10 experiments. The voltammetric sensor was directly applied to determination of nitroprusside in human plasma and urine samples and the average recovery for these samples was around 95,97% without any pre treatment. [source] Glucose Biosensor Mediated by 1,2-Diferrocenylethane in a Sono-Gel Composite ElectrodeELECTROANALYSIS, Issue 2-3 2007Barbara Ballarin Abstract An amperometric glucose biosensor was constructed based on a renewable carbon composite sono-gel matrix incorporating 1,2-diferrocenylethane as electron transfer mediator between the electrode and the active site of glucose oxidase. The enzyme was immobilized on the electrode surface by cross-linking with glutaraldehyde and bovine serum albumin. The process parameters for the fabrication of the biosensor and the influence of various experimental conditions (i.e., pH, temperature, operating potential) were investigated. Cyclic voltammetry and amperometric measurements were used to study the response of the glucose sensor, which displayed fast response time and good reproducibility. The analytical performances and the apparent Michaelis-Menten constant of the biosensor were evaluated. [source] Electrochemical Behavior of Catecholamines and Related Compounds at In Situ Surfactant Modified Carbon Paste ElectrodesELECTROANALYSIS, Issue 2-3 2007M.Carmen Blanco-López Abstract The voltammetric characteristics of catecholamines: epinephrine (E) and norepinephrine (NE) and related compounds: isoproterenol, metanephrine, L -dopa, methyldopa, vanillylmandelic acid (VMA), and homovanillic acid (HVA) at unmodified and in situ surfactant- modified carbon paste electrodes were comparatively evaluated. For the basic and amphoteric compounds the modification of the electrode surface with submicellar concentrations of anionic surfactants (sodium dodecylsulfate, sodium decylsulfate or sodium dodecylsulfonate) produce an important current enhancement in its oxidation and reduction peak current together with the improvement in the reversibility of the processes. These effects were explained in basis on electrostatic and hydrophobic interactions. On the other hand, the oxidation of acidic metabolites, HVA and VMA, was studied at electrodes modified in situ with cationic surfactants. Under certain conditions the surfactant could stabilise some of the electrochemical reaction intermediates, thus explaining the different voltammetric behaviour of HVA and VMA. [source] Photoelectrocatalytic Oxidation of NADH with Electropolymerized Toluidine Blue OELECTROANALYSIS, Issue 2-3 2007Yusuf Dilgin Abstract A poly(Toluidine Blue O) (poly-TBO) modified electrode was successfully prepared by repeated sweeping the applied potential from ,0.6 to +0.8,V (vs. SCE) on a glassy carbon electrode (GCE) in borate buffer solution at pH,9.1,containing 0.1,M NaNO3 and 0.4,mM Toluidine Blue O (TBO). The poly-TBO modified GCE shows electrocatalytic activity toward NADH oxidation in phosphate buffer solution at pH,7.0, with an overpotential of ca. 350,mV lower than that at the bare electrode. The photoelectrocatalytic oxidation of NADH at this electrode was also successfully investigated by using cyclic voltammetry and amperometry at constant potential. When the modified electrode surface was irradiated with a 250,W halogen lamp, a photoelectrocatalytic effect was observed for NADH oxidation and the current was increased about 2.2 times. The applied potential was selected at +100,mV for amperometric and photoamperometric detection of NADH. A linear calibration graph for NADH was obtained in the range between 1.0×10,5 and 1.0×10,3 M and between 5.0×10,6 and 1.0×10,3 M for amperometric and photoamperometric studies, respectively. The effect of some interfering compounds, such as ascorbic acid and dopamine on the electrocatalytic and photoelectrocatalytic oxidation of NADH was tested. [source] Electrocatalytic Oxidation of Sulfur Containing Amino Acids at Renewable Ni-Powder Doped Carbon Ceramic Electrode: Application to Amperometric Detection L -Cystine, L -Cysteine and L -MethionineELECTROANALYSIS, Issue 21 2006Abdollah Salimi Abstract A sol-gel technique was used here to prepare a renewable carbon ceramic electrode modified with nickel powder. Cyclic voltammograms of the resulting modified electrode show stable and a well defined redox couple due to Ni(II)/Ni(III) system with surface confined characteristics. The modified electrode shows excellent catalytic activity toward L -cystine, L -cysteine and L -methionine oxidation at reduced overpotential in alkaline solutions. In addition the antifouling properties at the modified electrode toward the above analytes and their oxidation products increases the reproducibility of results. L -cystine, L -cysteine and L -methionine were determined chronoamperometricaly at the surface of this modified electrode at pH range 9,13. Under the optimized conditions the calibration curves are linear in the concentration range 1,450,,M, 2,90,,M and 0.2,75,,M for L -cystine, L -methionine and L -cysteine determination, respectively. The detection limit and sensitivity were 0.64,,M, 3.8,nA/ ,M for L -cystine, 2,,M, 5.6,nA/ ,M for L -methionine and 0.2,,M and 8.1,nA/,M for L -cysteine. The advantageous of this modified electrode is high response, good stability and reproducibility, excellent catalytic activity for oxidation inert molecules at reduced overpotential and possibility of regeneration of the electrode surface by potential cycling for 5,minutes. Furthermore, the modified electrode has been prepared without using specific reagents. This sensor can be used as an amperometric detector for disulfides detection in chromatographic or flow systems. [source] Gold Nanoparticles in Nonenzymatic Electrochemical Detection of SugarsELECTROANALYSIS, Issue 19-20 2006Fredy Kurniawan Abstract A nonenzymatic electrochemical sensor for detection of sugars was prepared by layer-by-layer deposition of gold nanoparticles on thin gold electrodes. The deposition was optimized by using of surface plasmon resonance. Voltammetric investigation and impedance spectroscopy of the sensor was performed. Electrical currents caused by glucose on bare gold electrodes and on gold electrodes coated by immobilized gold nanoparticles were compared. The electrodes with nanoparticles display much higher current of glucose oxidation. The oxidation becomes blocked when the swept electrode potential exceeded +0.25,V, during the back scan an oxidation peak is observed again but at less positive potential. The magnitudes of these current peaks are linearly dependent on the glucose concentration; this dependence can be used as calibration for analytical applications. The limit of detection for glucose is below 0.5,mM, the sensitivity (normalized to the macroscopic electrode surface) is about 160,,A,cm,2,mM,1. The sensor response is linear till at least 8,mM of glucose concentration. [source] Dramatic Effects of Ionic Liquid on Platinum Electrode Surface and Electron-Transfer Rates of meso -TetraphenylporphyrinsELECTROANALYSIS, Issue 12 2006Afsaneh Safavi Abstract The effect of addition of a room temperature ionic liquid, 1-butyl-3-methyl imidazolium hexafluorophosphate [bmim][PF6], on the electrochemical behavior of different free-base para-substituted meso -tetraphenylporphyrins in dichloromethane solution has been studied using cyclic voltammetric technique. It has been found that the ionic liquid has the ability to regenerate platinum electrode surface and improves the reversibility of electrode processes. This has been true for the case of all the porphyrins studied. [source] Carbon Powder Based Films on Traditional Solid Electrodes as an Alternative to Disposable ElectrodesELECTROANALYSIS, Issue 11 2006Bogdan Yosypchuk Abstract The covering of conventional solid electrode with a film using an ink containing a conductive powder and a polymer enables to broaden the potential window of the original solid electrode. A solid silver amalgam electrode covered with such a film exhibits a potential window from ,600,mV to +1400,mV vs. SCE reference electrode. The renewal of the film is fast and simple: the electrode can be simply wiped with a filter paper to remove the old film and immersed into an ink solution or 1,2,,L of this ink solution can be applied to the surface of the electrode with a micro dispenser to form a new film. Therefore, just the inexpensive film at the electrode surface is disposable and there is no need to dispose the whole, more expensive electrode. Moreover, when a suitable electrochemical pretreatment of the film electrode is applied, the same film can be used for reproducible measurements for several days. [source] Reagentless Glucose Biosensor Based on the Direct Electrochemistry of Glucose Oxidase on Carbon Nanotube-Modified ElectrodesELECTROANALYSIS, Issue 11 2006Xiliang Luo Abstract The direct electrochemistry of glucose oxidase (GOD) was revealed at a carbon nanotube (CNT)-modified glassy carbon electrode, where the enzyme was immobilized with a chitosan film containing gold nanoparticles. The immobilized GOD displays a pair of redox peaks in pH,7.4 phosphate buffer solutions (PBS) with the formal potential of about ,455,mV (vs. Ag/AgCl) and shows a surface-controlled electrode process. Bioactivity remains good, along with effective catalysis of the reduction of oxygen. In the presence of dissolved oxygen, the reduction peak current decreased gradually with the addition of glucose, which could be used for reagentless detection of glucose with a linear range from 0.04 to 1.0,mM. The proposed glucose biosensor exhibited high sensitivity, good stability and reproducibility, and was also insensitive to common interferences such as ascorbic and uric acid. The excellent performance of the reagentless biosensor is attributed to the effective enhancement of electron transfer between enzyme and electrode surface by CNTs, and the biocompatible environment that the chitosan film containing gold nanoparticles provides for immobilized GOD. [source] Determination of Rutin in Green Tea Infusions Using Square-Wave Voltammetry with a Rigid Carbon-Polyurethane Composite ElectrodeELECTROANALYSIS, Issue 10 2006Andréa Abstract This paper presents a comparative study on the electrochemical behavior of the flavonoid rutin on a rigid carbon-polyurethane composite electrode and on a glassy carbon electrode. The electrochemical oxidation reaction of rutin was found to be quasireversible and affected by adsorption on the electrode surface. A square-wave voltammetric method was developed for determination of rutin in green tea infusion samples using the RCPE electrode and data treatment by a deconvolution procedure. The detection limit achieved in buffered solutions was 7.1×10,9,mol L,1 using the RCPE and 1.7×10,8,mol L,1 using the GC electrode the average reproducibility for five determinations being 3.5%. [source] Redox Active Two-Component Films of Palladium and Covalently Linked Zinc Porphyrin,Fullerene DyadELECTROANALYSIS, Issue 9 2006Marta Plonska Abstract Redox active films have been generated electrochemically by the reduction of dyads consisting of fullerene C60 covalently linked to zinc meso -tetraphenyloporphyrin, ZnPC60, and palladium acetate. The films are believed to consist of a polymeric network formed via covalent bonds between the palladium atoms and the fullerene moieties. In these films, the zinc porphyrin moiety is covalently linked to the polymeric chains through the pyrrolidine ring of the fullerene. The ZnPC60/Pt films are electrochemically active in both positive and negative potential excursions. At positive potentials, two oxidation steps for the zinc porphyrin are observed. In the negative potential range, electron transfer processes involving the zinc porphyrin and the fullerene entities are observed. Film formation is also accompanied by palladium deposition on the electrode surface. The presence of a metallic phase in the film influences its morphology, structure and electrochemical properties. [source] Gold Nanoparticle-Based Mediatorless Biosensor Prepared on Microporous ElectrodeELECTROANALYSIS, Issue 3 2006Fenghua Zhang Abstract A mediatorless biosensor was fabricated with a double-sided microporous gold electrode by successively immobilizing a mixed self-assembled monolayer (SAM) comprising carboxylic-acid- and thiol-terminated thiolate (dl -thiorphan and 1,8-octanedithiol), glucose oxidase (GOx) and finally gold nanoparticle (Au NP) on one working side. The double-sided microporous gold electrodes were formed by plasma sputtering of gold on a porous nylon substrate, yielding a face-to-face type two-electrode electrochemical cell. While the straight chain molecule 1,8-octanedithiol forms a dense insulating monolayer, the side armed dl -thiorphan forms a low density layer for the diffusion of redox couples to the electrode surface. The mixed SAM not only provided the linking functional groups for both enzyme and Au NP but also resulted in the appropriately spaced monolayer for direct electron tansfer (ET) process from the center of the redox enzyme to the electrode surface. After covalently immobilizing GOx onto the carboxylic-acid-terminated monolayer, Au NP was easily immobilized to both enzyme and nearby thiols by simple dispensing of the colloidal gold solution. It was observed that the resulting amperometric biosensor exhibited quantitatively the same response to glucose in the presence and in the absence of dissolved oxygen, which evidence that the Au NPs immobilized on and around the GOx promote direct ET from the enzymes to the electrode, assuming the role of a common redox mediator. [source] Disposable Gold Electrodes with Reproducible Area Using Recordable CDs and Toner MasksELECTROANALYSIS, Issue 1 2006Denise Lowinsohn Abstract The fabrication and characterization of very cheap disposable gold disk electrodes with reproducible area is reported. The innovation of the proposed procedure is the use of toner masks to define reproducible areas on uniform gold surfaces obtained from recordable compact disks (CD-R). Toner masks are drawn in a laser printer and heat transferred to gold surfaces, defining exactly the electrodes area. The electrochemical behavior of these disposable electrodes was investigated by cyclic voltammetry in Fe(CN)64, solutions. The relative standard deviation for signals obtained from 10 different gold electrodes was below 1 %. The size of the disk electrodes can be easily controlled, as attested by voltammetric responses recorded by using electrodes with radii varying from 0.5 to 3.0,mm. The advantages of using this kind of electrode for analytical measurements of substances that strongly adsorb on the electrode surface such as cysteine are also addressed. [source] Electrochemically-Induced Deposition of Amine-Functionalized Silica Films on Gold Electrodes and Application to Cu(II) Detection in (Hydro)Alcoholic MediumELECTROANALYSIS, Issue 19 2005Alain Walcarius Abstract Well-adherent amine-functionalized porous silica films have been deposited on gold electrodes by combining the self-assembly technology, the sol,gel process, and the electrochemical modulation of pH at the electrode/solution interface. A partial self-assembled monolayer of mercaptopropyl-trimethoxysilane (MPTMS) was first formed on disposable gold electrodes from recordable CDs (Au-CDtrodes). The so pretreated MPTMS-Au-CDtrodes were immersed in a stable sol solution (pH,3) containing (3-aminopropyl)-triethoxysilane (APTES) and tetraethoxysilane (TEOS). Polycondensation of the APTES and TEOS precursors was then achieved by applying a negative potential for a given period of time to generate a local pH increase at the electrode/solution interface and promote the deposition of the amine functionalized silica film adhering well to the electrode surface owing to the MPTMS monolayer acting somewhat as a "molecular glue". Various parameters affecting the electrodeposition process have been studied and the film permeability to redox probes in solution was characterized by cyclic voltammetry. The amine-functionalized silica film electrodes were then applied to the preconcentration of copper(II) species prior to their electrochemical detection by anodic stripping differential pulse voltammetry. Getting high sensitivity has however required the application of an electrochemical pre-activation step as the majority of the organo-functional groups were in the form of ammonium moieties (because the film was prepared from an acidic sol). This was achieved by applying a sufficiently negative potential to the electrode surface to reduce protons and increase consequently the amine-to-ammonium ratio within the film and, thus, the efficiency of the precocentration process. The resulting device was then optimized for copper(II) determination in hydroalcoholic medium, giving rise to a linear response in the 0.1,10,,M concentration range. [source] Application of a Carbon Paste Electrode Modified with a Schiff Base Ligand to Mercury Speciation in WaterELECTROANALYSIS, Issue 11 2005Montserrat Colilla Abstract A carbon paste electrode, modified with benzylbisthiosemicarbazone is used for mercury speciation in water samples. Mercury ion is selectively accumulated on the electrode surface at open circuit and its analysis was performed by cyclic voltammetry or square-wave voltammetry (SWV). A detection limit of 8,,g L,1 (3,) was found for 15,min of accumulation using SWV as measurement technique. The effect of several metallic ions and organic substances on voltammetric signal is examined. For speciation purposes, a ligand competition methodology between ligands in solution and electrode is used. Model mercury complexes are characterized as a function of their dissociation kinetics. The method was applied to mercury speciation in water samples from the Jarama River in Madrid. [source] | ||||||||||||||||||||||||||||||||||