Home About us Contact
|
Home About us Contact | ||
|
|
||
Drug Delivery Applications (drug + delivery_application)
Selected AbstractsPhotopolymerizable Hydrogels Made from Polymer-Conjugated Albumin for Affinity-Based Drug Delivery,ADVANCED ENGINEERING MATERIALS, Issue 1-2 2010Liat Oss-Ronen As a drug delivery vehicle, biodegradable albumin hydrogels can combine the high binding capacity of albumin with the structural stability of a polymeric hydrogel network to enable controlled release of small molecules based on both binding affinity and physical interactions. In the present study, we report on the development of a hybrid hydrogel composed of albumin conjugated to poly(ethylene glycol) (PEG) for drug delivery applications where controlled release is accomplished using the natural affinity of the drugs to the serum albumin. Bovine serum albumin was conjugated to PEG-diacrylate having a molecular weight of 1.5, 4, or 10,kDa to form a PEGylated albumin macromolecule (mono-PEGylated or multi-PEGylated). Biodegradable hydrogels were formed from the PEGylated albumin using photopolymerization. Two model drugs, Warfarin and Naproxen, were used for equilibrium dialysis and release experiments from the hydrogels, both having relatively low molecular weights and a known high affinity for albumin. Equilibrium dialysis experiments showed that multi-PEGylation of albumin significantly decreased the drug affinity to the protein compared to non-PEGylated controls, irrespective of the PEG molecular weight. However, the results from drug release experiments showed that mono-PEGylation of albumin did not change its natural affinity to the drug. Comparing the release profiles with a Fickian diffusion model provided strong evidence that hydrogels containing mono-PEGylated albumin exhibited sub-diffusive drug release properties based on the affinity of the drug to the tethered protein. [source] Poly(glutamic acid) poly(ethylene glycol) hydrogels prepared by photoinduced polymerization: Synthesis, characterization, and preliminary release studies of protein drugsJOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 1 2002Zhiqiang Yang Abstract A class of new biodegradable hydrogels based on poly(ethylene glycol) methacrylate-graft-poly(glutamic acid) and poly(ethylene glycol) dimethacrylate was synthesized by photoinduced polymerization. Because all the polymeric constituents were highly hydrophilic, crosslinking could be performed in aqueous solutions. This type of crosslinked hydrogel was prepared by modifying a select number of acidic side-groups on poly(glutamic acid) with poly(ethylene glycol) methacrylate. These modified chains were then crosslinked in the presence of poly(ethylene glycol) dimethacrylate under a photoinduced polymerization at a wavelength of 365 nm. Swelling experiments were conducted to study the crosslinking density, pH-responsive behavior, and degradation of the hydrogel. Results showed that the degree of swelling of this type of hydrogels increased as the crosslinker concentration (or density) was reduced. Because of the presence of acidic side chains on poly(glutamic acid), swelling behavior was found to be pH-responsive, increasing at high pH in response to the increase in the amount of ionized acidic side chains. The degradation rate of these hydrogels also varied with pH. More rapid degradation was observed under stronger alkaline conditions because of the hydrolysis of the ester bonds between the crosslinker and the polymer backbone. Practically useful degradation rates could be achieved for such hydrogels under physiological conditions. Drug release rates from these hydrogels were found to be proportional to the protein molecular weight and the crosslinker density; increasing at lower protein molecular weight or crosslinker density. The preliminary findings presented in this article suggest that this class of biodegradable hydrogels could be an attractive avenue for drug delivery applications. The specific photoinduced crosslinking chemistry used would permit hydrogels to be synthesized in existence of the entrapped macromolecular drugs including peptides, proteins, and cells. In addition, the rapid feature of this polymerization procedure along with the ability to perform hydrogel synthesis and drug loading in an aqueous environment would offer great advantages in retaining drug activity during hydrogel synthesis. © 2002 Wiley Periodicals, Inc. J Biomed Mater Res 62: 14,21, 2002 [source] Binding and release studies of a cationic drug from a star-shaped four-arm poly(ethylene oxide)- b -poly(methacrylic acid)JOURNAL OF PHARMACEUTICAL SCIENCES, Issue 2 2010E. He Abstract Star-shape polymers possess higher densities of terminal functional groups and three-dimensional tetrahedron structure that induce significantly different association and interactions with drug compared to linear structure of identical molecular weights. Four-arm poly(ethylene oxide)- b -poly(methacrylic acid) block copolymer was synthesized by atom transfer radical polymerization technique, and it self-assembled into core-shell micelles and extended unimers at low and high pH respectively. The negatively charged carboxylate groups on the polymer chains interacted with a cationic drug through electrostatic interaction forming polymer/drug complexes stabilized by biocompatible hydrophilic PEO segments. The hydrodynamic radius (Rh) of the polymeric aggregates and polymer/drug complexes ranged from 46 to 84,nm and 32 to 55,nm at pH of 4.6 and 8.0 respectively, making them suitable for drug delivery applications. The thermodynamic parameters and interactions between polymer and drug were determined by isothermal titration calorimetric technique. The electrostatic force, hydrogen bonding and hydrophobic interactions controlled the characteristics of polymer/drug formation and complexes when the molar ratios of drug and polymer were varied. Drug selective electrode system was used to measure the dynamic release of imipramine hydrochloride (IPH) from multi-arm PEO- b -PMAA star polymer. The release exponent n was greater than 0.5 indicating a non-Fickian type diffusion behavior, where the release behavior was dominated by chain relaxation induced by ion exchange that was dependent on pH. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99:782,793, 2010 [source] Solid-state solubility influences encapsulation and release of hydrophobic drugs from PLGA/PLA nanoparticlesJOURNAL OF PHARMACEUTICAL SCIENCES, Issue 7 2004Jayanth Panyam Abstract Biodegradable nanoparticles formulated from poly(D,L -lactide- co -glycolide) (PLGA) and polylactide (PLA) polymers are being extensively investigated for various drug delivery applications. In this study, we hypothesize that the solid-state solubility of hydrophobic drugs in polymers could influence their encapsulation and release from nanoparticles. Dexamethasone and flutamide were used as model hydrophobic drugs. A simple, semiquantitative method based on drug,polymer phase separation was developed to determine the solid-state drug,polymer solubility. Nanoparticles using PLGA/PLA polymers were formulated using an emulsion,solvent evaporation technique, and were characterized for size, drug loading, and in vitro release. X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC) were used to determine the physical state of the encapsulated drug. Results demonstrated that the solid-state drug,polymer solubility depends on the polymer composition, molecular weight, and end-functional groups (ester or carboxyl) in polymer chains. Higher solid-state drug,polymer solubility resulted in higher drug encapsulation in nanoparticles, but followed an inverse correlation with the percent cumulative drug released. The XRD and DSC analyses demonstrated that the drug encapsulated in nanoparticles was present in the form of a molecular dispersion (dissolved state) in the polymer, whereas in microparticles, the drug was present in both molecular dispersion and crystalline forms. In conclusion, the solid-state drug,polymer solubility affects the nanoparticle characteristics, and thus could be used as an important preformulation parameter. © 2004 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 93:1804,1814, 2004 [source] Preparation and characterization of a customized cellulose acetate butyrate dispersion for controlled drug deliveryJOURNAL OF PHARMACEUTICAL SCIENCES, Issue 6 2002Siva Vaithiyalingam Abstract The purpose of the present experiment was to prepare and characterize the aqueous-based pseudolatex system of cellulose acetate butyrate (CAB) for controlled drug delivery. Aqueous pseudolatex systems are advantageous over organic-based coating systems because these systems are devoid of criteria pollutants such as carbon monoxide, nitrogen oxides, nonmethane volatile organic compounds, and sulfur dioxide. Pseudolatex was prepared with CAB and polyvinyl alcohol (stabilizer) by a polymer emulsification technique. The stability of pseudolatex was evaluated. Particle size was measured and rheological experiments were conducted. The glass transition temperature, microscopic free volume, permeation coefficient, and mechanical properties of plasticized pseudolatex films were estimated. Surface roughness of coating on inert Nu-Pareil® beads (Ingredient Technology Corp., Mahwah, NJ) was measured as a function of coating weight gain. The CAB Pseudolatex was found to be stabilized by steric forces. From intrinsic viscosity, the thickness of the stabilization layer was estimated. An increase in polymeric particles proportionately decreased the thickness of the stabilization layer. All the essential properties of a coating membrane such as microscopic free-volume fraction, permeability coefficient, mechanical properties, and glass transition temperature were fairly controllable as a function of plasticizer concentration. The pseudolatex dispersion of CAB was stable with negligible sedimentation volume and a particle size of 300 nm. Because CAB is water insoluble and non-ionizable, this pseudolatex can be used for pH-independent coating. The films obtained were strong and flexible for controlled drug delivery applications. Coating with the CAB dispersion reduced the surface roughness of beads but it remained stable as a function of increase in coating weight gain. © 2002 Wiley-Liss, Inc. and the American Pharmaceutical Association J Pharm Sci 91:1512,1522, 2002 [source] Advances and potential applications of chitosan derivatives as mucoadhesive biomaterials in modern drug deliveryJOURNAL OF PHARMACY AND PHARMACOLOGY: AN INTERNATI ONAL JOURNAL OF PHARMACEUTICAL SCIENCE, Issue 8 2006Shruti Chopra Pharmaceutical technologists have been working extensively on various mucoadhesive polymeric systems to create an intimate and prolonged contact at the site of administration. Chitosan is one of the most promising polymers because of its non-toxic, polycationic biocompatible, biodegradable nature, and particularly due to its mucoadhesive and permeation enhancing properties. Due to its potential importance in controlled drug delivery applications, pharmaceutical scientists have exploited this mucoadhesive polymer. However, chitosan suffers from limited solubility at physiological pH and causes presystemic metabolism of drugs in intestinal and gastric fluids in the presence of proteolytic enzymes. These inherent drawbacks of chitosan have been overcome by forming derivatives such as carboxylated, various conjugates, thiolated, and acylated chitosan, thus providing a platform for sustained release formulations at a controlled rate, prolonged residence time, improved patient compliance by reducing dosing frequency, enhanced bioavailability and a significant improvement in therapeutic efficacy. We have explored the potential benefits of these improved chitosan derivatives in modern drug delivery. [source] | ||||||||||