Home About us Contact
|
Home About us Contact | ||
|
|
||
Differential Pulse Voltammetry (differential + pulse_voltammetry)
Selected AbstractsStudy of Electrochemical Processes with Coupled Homogeneous Chemical Reaction in Differential Pulse Voltammetry at Spherical Electrodes and MicrohemispheresELECTROANALYSIS, Issue 16 2010Eduardo Laborda Abstract Homogeneous chemical reactions coupled to oxidation-reduction processes at electrode surfaces are very common in electrochemistry. In this paper we cope with the application of Differential Pulse Voltammetry at spherical electrodes and microhemispheres for the study of this kind of systems. Analytical expressions are deduced from which the influence of the different experimental variables is examined. Several diagnostic criteria for elucidation of the reaction mechanism from DPV peak parameters are given, as well as working curves for extraction of the kinetic rate constants of the chemical reaction. [source] Determination of Diclofenac in Urine Samples by Molecularly-Imprinted Solid-Phase Extraction and Adsorptive Differential Pulse VoltammetryELECTROANALYSIS, Issue 15 2007Laura Fernández-Llano Abstract A molecularly imprinted polymer for diclofenac (DCF) was prepared by thermal polymerization over silica beads using 2-(dimethylamino)ethyl-methacrylate as functional monomer. After silica elimination by HF treatment, the polymer was applied to the selective solid-phase extraction of the drug from urine followed by its quantification by adsorptive differential pulse voltammetry. Results indicate that the drug could be selectively extracted from the sample and quantified at clinically relevant concentrations (,g/mL). [source] Simultaneous Determination of Quinoline and Pyridine Compounds in Gasoline and Diesel by Differential Pulse VoltammetryELECTROANALYSIS, Issue 6 2007Leonardo Abstract The presence of trace basic organonitrogen compounds such as quinoline and pyridine in derivative petroleum fuels plays an important role in maintaining the engines of vehicles. However, these substances can contaminate the environment and so must be controlled because most of them are potentially carcinogenic and mutagenic. For these reasons, a reliable and sensitive method was developed for the determination of basic nitrogen compounds in fuel samples such as gasoline and diesel. This method utilizes preconcentration on an ion,exchange resin (Amberlyte IR,120,H) followed by differential pulse voltammetry (DPV) on a glassy carbon electrode. The electrochemical behavior of quinoline and pyridine as studied by cyclic voltammetry (CV) suggests that their reduction occurs via a reversible electron transfer followed by an irreversible chemical reaction. Very well resolved diffusion-controlled voltammetric peaks were obtained in dimethylformamide (DMF) with tetrabutylammonium tetrafluoroborate (TBAF4 0.1,mol L,1) for quinoline (,1.95,V) and pyridine (,2.52,V) vs. Ag|AgCl|KClsat reference electrode. The proposed DPV method displayed a good linear response from 0.10 to 300,mg L,1 and a limit of detection (LOD) of 5.05 and 0.25,,g L,1 for quinoline and pyridine, respectively. Using the method of standard additions, the simultaneous determination of quinoline and pyridine in gasoline samples yielded 25.0±0.3 and 33.0±0.7,mg L,1 and in diesel samples yielded 80.3±0.2 and 131±0.4,mg L,1, respectively. Spike recoveries were 94.4±0.3% and 101±0.5% for quinoline and pyridine, respectively, in the fuel determinations. This proposed method was also compared with UV-vis spectrophotometric measurements. Results obtained for the two methods agreed well based on F and t student's tests. [source] Double Modification of Electrode Surface for the Selective Detection of Epinephrine and Its Application to Flow Injection Amperometric AnalysisELECTROANALYSIS, Issue 22 2009Guang-Ri Xu Abstract A glassy carbon electrode having two polymer layers has been applied to selectively detect epinephrine. The inner layer formed by electropolymerization of macrocyclic nickel complex functioned as an electrocatalyst for epinephrine oxidation and the outer layer composed of hydrolyzed polyurethane ,-benzyl L -glutamate as a screening layer. Differential pulse voltammetry showed almost 100% recovery of epinephrine even in 100-fold excess of interferents. When applied to a dual glassy carbon electrode as an amperometric detector in flow injection analysis, a linear response over 0.1,,M and 10,,M was obtained. Recovery tested for 5-fold diluted human urine samples was 97.5%. [source] Chitosan Incorporating Cetyltrimethylammonium Bromide Modified Glassy Carbon Electrode for Simultaneous Determination of Ascorbic Acid and DopamineELECTROANALYSIS, Issue 17 2007Xuelian Zou Abstract Simultaneous determination of a neurotransmitter, dopamine (DA), and ascorbic acid (AA) is achieved at neutral pH on a chitosan incorporating cetyltrimethylammonium bromide (CTAB) modified glassy carbon (GC) electrode. Differential pulse voltammetry (DPV) technique was used to investigate the electrochemical response of DA and AA at a glassy carbon electrode modified with chitosan incorporating CTAB. An optimum 6.0,mmol L,1 of CTAB together with 0.5 wt% of chitosan was used to improve the resolution and the determination sensitivity. In 0.1,mol L,1 aqueous phosphate buffer solution of pH,6.8, the chitosan-CTAB modified electrode showed a good electrocatalytic response towards DA and AA. The anodic peak potential of DA shifted positively, while that of AA shifted negatively. Thus, the difference of the anodic peaks of DA and AA reached 0.23,V, which was enough to separate the two anodic peaks very well. The presented method herein could be applied to the direct simultaneous determination of DA and AA without prior treatment. The anodic peak currents (Ipa) of DPV are proportional to DA in the concentration range of 8,,M to 1000,,M, to that of AA 10,,M to 2000,,M, with correlation coefficients of 0.9930 and 0.9945, respectively. The linear range is much wider than previously reported. [source] The Influence of the Cathodic Pretreatment on the Electrochemical Detection of Dopamine by Poly(1-aminoanthracene) Modified ElectrodeELECTROANALYSIS, Issue 19 2010Estela de Pieri Troiani Abstract In this study we demonstrated the influence of the cathodic pretreatment of poly(1-aminoanthracene) (PAA) electropolymerized on a platinum electrode for determination of dopamine (DA). The DA electrochemical response was obtained after a cathodic pretreatment of the PAA electrode which consisted of applying a potential of ,0.7,V (vs. Ag/AgCl) for 3,s before each measurement. The pretreatment of the electrode changed the PAA electrocatalytic properties so that the electrode began to present electrochemical response to DA without interference of ascorbic acid (AA). The anodic peak currents determined by differential pulse voltammetry using pretreated PAA showed a linear dependence on the DA concentration from 0.56 to 100,µM with a detection limit of 0.13,µM and a correlation coefficient of 0.9986. The electrode exhibits a relative standard deviation of 1.2,% for ten successive measurements of a 0.5,mM DA solution. The analysis by scanning electron microscopy and atomic force microscopy show a homogeneous and nanostructured film with globular structures with diameter of about 20,nm. The analytical results obtained for DA determination at a pretreated PAA electrode in pharmaceutical formulation sample were in good agreement with those obtained by a comparative procedure at a 95,% confidence level. PAA electrode after the pretreatment showed electrochemical responses to DA with excellent selectivity, sensitivity, and high stability without interference of AA. [source] A Glassy Carbon Electrode Modified with Multiwalled Carbon Nanotube/Chitosan Composite as a New Sensor for Simultaneous Determination of Acetaminophen and Mefenamic Acid in Pharmaceutical Preparations and Biological SamplesELECTROANALYSIS, Issue 15 2010Ali Babaei Abstract A new chemically modified electrode is constructed based on multiwalled carbon nanotube/chitosan modified glassy carbon electrode (MWCNTs-CHT/GCE) for simultaneous determination of acetaminophen (ACT) and mefenamic acid (MEF) in aqueous buffered media. The measurements were carried out by application of differential pulse voltammetry (DPV), cyclic voltammetry (CV) and chronoamperometry (CA) methods. Application of DPV method showed that the linear relationship between oxidation peak current and concentration of ACT and MEF were 1,,M to 145,,M, and 4,,M to 200,,M, respectively. The analytical performance of this sensor has been evaluated for detection of ACT and MEF in human serum, human urine and a pharmaceutical preparation with satisfactory results. [source] Simultaneous Determination of Ascorbic Acid, Dopamine and Uric Acid at Pt Nanoparticles Decorated Multiwall Carbon Nanotubes Modified GCEELECTROANALYSIS, Issue 10 2010Zekerya Dursun Abstract A modified electrode was fabricated by electrochemically deposition of Pt nanoparticles on the multiwall carbon nanotube covered glassy carbon electrode (Pt nanoparticles decorated MWCNT/GCE). A higher catalytic activity was obtained to electrocatalytic oxidation of ascorbic acid, dopamine, and uric acid due to the enhanced peak current and well-defined peak separations compared with both, bare and MWCNT/GCE. The electrode surfaces were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and electrochemical impedance spectroscopy (EIS). Individual and simultaneous determination of AA, DA, and UA were studied by differential pulse voltammetry. The detection limits were individually calculated for ascorbic acid, dopamine, and uric acid as being 1.9×10,5,M, 2.78×10,8,M, and 3.2×10,8,M, respectively. In simultaneous determination, LODs were calculated for AA, DA, and UA, as of 2×10,5,M, 4.83×10,8,M, and 3.5×10,7,M, respectively. [source] Lable-Free Electrochemical DNA Sensor Based on Gold Nanoparticles/Poly(neutral red) Modified ElectrodeELECTROANALYSIS, Issue 6 2010Keying Zhang Abstract We present a new strategy for the label-free electrochemical detection of DNA hybridization based on gold nanoparticles (AuNPs)/poly(neutral red) (PNR) modified electrode. Probe oligonucledotides with thiol groups at the 5-end were covalently linked onto the surface of AuNPs/PNR modified electrode via S-Au binding. The hybridization event was monitored by using differential pulse voltammetry (DPV) upon hybridization generates electrochemical changes at the PNR-solution interface. A significant decrease in the peak current was observed upon hybridization of probe with complementary target ssDNA, whereas no obvious change was observed with noncomplementary target ssDNA. And the DNA sensor also showed a high selectivity for detecting one-mismatched and three-mismatched target ssDNA and a high sensitivity for detecting complementary target ssDNA, the detection limit is 4.2×10,12,M for complementary target ssDNA. In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA-hybridization conditions. [source] Detection of C Reactive Protein (CRP) in Serum by an Electrochemical Aptamer-Based Sandwich AssayELECTROANALYSIS, Issue 11 2009Sonia Centi Abstract A disposable electrochemical assay involving magnetic particles and carbon-based screen-printed electrodes (SPCEs) was developed for the detection of C Reactive Protein (CRP). CRP is a plasma protein and is among the most expressed proteins in acute phase inflammation cases, being a known biomarker for inflammatory states. The assay was based on a sandwich format in which a RNA aptamer was coupled to a monoclonal antibody and alkaline phosphatase (AP) was used as enzymatic label. After the sandwich assay, the modified magnetic beads were captured by a magnet on the surface of a graphite working electrode and the electrochemical detection was thus achieved through the addition of the AP substrate (,-naphthyl-phosphate) and ,-naphthol produced during the enzymatic reaction was detected using differential pulse voltammetry (DPV). The parameters influencing the different steps of the assay were optimized in order to reach the best sensitivity and specificity. With the optimized conditions, the assay was applied to the analysis of CRP free serum and serum samples. [source] Electrochemical Investigation of Strontium,Metallothionein Interactions , Analysis of Serum and Urine of Patients with OsteoporosisELECTROANALYSIS, Issue 3-5 2009Ivo Fabrik Abstract The main aim of this paper is to study interaction between strontium and metallothionein (MT), and to determine changes in strontium and thiols (MT, reduced glutathione, cysteine, and homocysteine) level in plasma, serum, and urine samples of patients treated with strontium ranelate (SrR). To investigate the interactions between MT and strontium(II) ions, adsorptive transfer stripping technique coupled with differential pulse voltammetry (DPV) the Brdicka reaction was employed. Besides standard Brdicka signals (Co, RS2Co, Cat1, Cat2, Cat3), we observed new signal related to Sr-MT interaction. Further we investigated the effect of various time of interaction, concentration of strontium(II) ions and temperature of supporting electrolyte on Brdicka signals. Optimal time of interaction was 240,s. Under temperature of supporting electrolyte 20,°C, we measured linear dependence of Cat3 signal height on strontium(II) ions concentration. After that we have investigated the possibility of strontium-MT interactions, we were interested in strontium, MT and low molecular mass thiols levels in serum and urine of patients treated with strontium(II) ions to cure osteoporosis. Strontium concentration determined by atomic absorption spectrometry was 55±5,,g/L before and 10,500±1,400,,g/L at the 30th day of SrR administration. Levels of metallothionein in serum ranged from 0.1 to 6.4,,M. Correlation between serum strontium concentration and MT level was determined and correlation coefficient was R=0.93. [source] Electrocatalytic and Analytical Response of Cobalt Phthalocyanine Modified Carbon Paste Electrodes Towards Antimalarial Endoperoxide ArtemisininELECTROANALYSIS, Issue 3-5 2009Chhanda Debnath Abstract A cobalt phthalocyanine modified carbon paste electrode was constructed for the analysis of artemisinin in Artemisia annua plant. Artemisinin, a sesquiterpene endoperoxide, is a novel, important antimalarial drug and is used in the therapy against Plasmodium falciparum. The developed cobalt phthalocyanine modified electrode exhibited a significant electrocatalytic activity in presence of artemisinin when using cyclic and differential pulse voltammetry. Under optimized conditions in phosphate buffer of pH,7 a well defined voltammetric peak appeared at about ,500,mV vs. Ag/AgCl. The differential pulse voltammetric peak current of artemisinin was increased linearly with the concentration range of 2.1×10,5 to 5.3×10,4 M (R=0.9997). The limit of detection (LOD) was found to be 6.5×10,6 M. The modified electrode was successfully tested for detecting artemisinin in complex plant materials. [source] Voltammetric Investigation of Zinc Release from Metallothioneins Modulated by the Glutathione Redox Couple and Separated with a Porous MembraneELECTROANALYSIS, Issue 20 2008Lin Liu Abstract Glutathione (GSH), in addition to serving as a redox buffer in cellular environment, has been suggested as a modulator in metal regulation and homeostasis by metallothioneins (MTs). The interactions of MTs with both GSH and its oxidized form GSSG have been shown to govern the direction of metal transfer. Common methods for the determination of zinc release from MTs modulated by GSH/GSSG either involve radioactive species or enzymes or are labor-intensive. In this study, upon separation of Zn2+ from the reaction mixture of MTs and GSH with a centrifugal filter membrane, differential pulse voltammetry (DPV) was used for the Zn2+ quantification. The same approach is extended to the studies of metal transfer between Zn7MT with a GSH/GSSG mixture and that between Zn7MT with GSSG. The concomitant conversion between the free thiol and disulfide bonds was confirmed with UV-vis spectrophotometry. The results demonstrate that GSSG, GSH, and the GSH/GSSG mixture all modulate zinc release from Zn7MT. The percentage of zinc release increases in the order of GSH, GSSG, and the GSH/GSSG mixture. The new approach is demonstrated to be well suited for investigation of redox regulation of MT and its reaction with zinc-containing enzymes. [source] Some Properties of Sodium Dodecyl Sulfate Functionalized Multiwalled Carbon Nanotubes Electrode and Its Application on Detection of Dopamine in the Presence of Ascorbic AcidELECTROANALYSIS, Issue 16 2008Dan Zheng Abstract A sodium dodecyl sulfate (SDS) functionalized multiwalled carbon nanotubes (MWNTs) electrode (SDS/MWNTs) was successfully constructed in this study. The electrochemical property of the SDS/MWNTs electrode has been characterized by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Nyquist plots suggest that the immersion time of SDS affects the resistances of the MWNTs electrodes. The thickness of adsorbed SDS on MWNTs surface is estimated to be 1.23,nm, which is close to the value of SDS monolayer. CV results demonstrate a 5-fold enhanced response for dopamine (DA) at the SDS/MWNTs electrode compared to the bare MWNTs one. DPV results illustrate that DA can be selectively determined in the presence of high concentration ascorbic acid (AA) with a linear range from 20,,M to 0.20,mM and a sensitivity of 0.024,,A ,M,1 at the SDS/MWNTs electrode. [source] Selective Determination of Dopamine in the Presence of Ascorbic Acid at Porous-Carbon-Modified Glassy Carbon ElectrodesELECTROANALYSIS, Issue 11 2008Shuqing Song Abstract Selective dopamine (DA) determinations using porous-carbon-modified glassy carbon electrodes (GCE) in the presence of ascorbic acid (AA) were studied. The effects of structure textures and surface functional groups of the porous carbons on the electrochemical behavior of DA was analyzed based on both cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements. The differential pulse voltammetry of DA on the modified GCE was determined in the presence of 400-fold excess of AA, and the linear determination ranges of 0.05,0.99, 0.20,1.96, and 0.6,12.60,,M with the lowest detected concentrations of 4.5×10,3, 4.4×10,2, and 0.33,,M were obtained on the mesoporous carbon, mesoporous carbon with carboxylic and amino groups modified electrodes, respectively. [source] Differential Pulse Voltammetric Determination of Uric Acid on Carbon-Coated Iron Nanoparticle Modified Glassy Carbon ElectrodesELECTROANALYSIS, Issue 10 2008Shengfu Wang Abstract A carbon-coated iron nanoparticles (CIN, a new style fullerence related nanomaterial) modified glassy carbon electrode (CIN/GCE) has been developed for the determination of uric acid (UA). Electrochemical behaviors of UA on CIN/GCE were explored by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). It was found that the voltammetric response of UA on CIN/GC was enhanced dramatically because of the strong accumulation effect of CIN and the large working area of the CIN/GC electrode. The parameters including the pH of supporting electrolyte, accumulation potential and time, that govern the analytical performance of UA have been studied and optimized. The DPV signal of UA on CIN/GCE increased linearly with its concentration in the range from 5.0×10,7 to 2.0×10,5 M, with a detection limit of 1.5×10,7 M (S/N=3). The CIN/GCE was used for the determination of UA in samples with satisfactory results. The proposed CIN/GCE electrochemical sensing platform holds great promise for simple, rapid, and accurate detection of UA. [source] Preparation of Novel Arrays Silver Nanoparticles Modified Polyrutin Coat-Paraffin-Impregnated Graphite Electrode for Tyrosine and Tryptophan's OxidationELECTROANALYSIS, Issue 8 2008Guan-Ping Jin Abstract A novel array silver nanoparticles and Rutin complex film modified paraffin-impregnated graphite electrode was proposed in this work (denoted as Ag/Rutin/WGE). The characteristics were investigated by the field emission scanning electron microscopy (FE-SEM), infrared spectra (IR), UV-visible (UV), X-ray photoelectron spectroscopy (XPS) and electrochemical techniques. Silver ions were gradually chelated by polyrutin film at 4,-oxo-5,-OH and 5-OH-4-oxo sites accompanying adsorption, then. Silver nanoparticles were highly-dispersed electrodeposited on polyrutin film. The electrochemical behaviors of tyrosine (Tyr) and tryptophan (Trp) were studied by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The Ag/Rutin/WGE electrode shows overlapping catalysis for the oxidation of Tyr and Trp. The linear response of Tyr and Trp were 0.3,10.0 and 0.7,70.0,,M with detection limit of 0.07 and 0.1,,M in a signal-to-noise ratio of 3. [source] Bismuth Film Electrode as an Alternative for Mercury Electrodes: Determination of Azo Dyes and Application for Detection in Food StuffsELECTROANALYSIS, Issue 21 2007Benoît Claux Abstract Bismuth electrodes were investigated and exhibit electrochemical properties similar to mercury electrodes but with much lower toxicity. An electrochemical application of bismuth film modified glassy carbon electrode for azo dyes determination was investigated. The plating step was optimized in order to achieve its analytical efficiency. A plating potential of ,0.9,V in a solution of 200,mg/L Bi(NO3)3, 0.5,M HNO3 for 100,s yields to a suitable electrode (in terms of stability and detection). Azo dyes such as azorubine (i.e., carmoisine, E122), amaranth (E123), ponceau 4R (i.e., new coccine, E124) and allura red (E129) were determined by differential pulse voltammetry in a NaCl solution in the concentration range of few ppm to 100 ppm. The reproducibility of the signal, characterized by the relative standard deviation, was found to be less than 5%, the detection and quantification limits were few mg/L. The influence of other food components on the signal was studied and the applicability was tested on real beverages samples. [source] L -Cysteine Voltammetry at a Carbon Paste Electrode Bulk-Modified with Ferrocenedicarboxylic AcidELECTROANALYSIS, Issue 17 2007Jahan-Bakhsh Raoof Abstract The electrochemical behavior of L -cysteine studied at the surface of ferrocenedicarboxylic acid modified carbon paste electrode (FDCMCPE) in aqueous media using cyclic voltammetry, differential pulse voltammetry and double potential step chronoamperometry. It has been found that under optimum condition (pH,8.00) in cyclic voltammetry, the oxidation of L -cysteine occurs at a potential about 200,mV less positive than that of an unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, ,, and catalytic reaction rate constant, kh were also determined using electrochemical approaches. The electrocatalytic oxidation peak current of L -cysteine showed a linear dependent on the L -cysteine concentration and linear analytical curves were obtained in the ranges of 3.0×10,5 M,2.2×10,3 M and 1.5×10,5 M,3.2×10,3 M of L -cysteine concentration with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods respectively. The detection limits (3,) were determined as 2.6×10,5 M and 1.4×10,6 M by CV and DPV methods. [source] Determination of Diclofenac in Urine Samples by Molecularly-Imprinted Solid-Phase Extraction and Adsorptive Differential Pulse VoltammetryELECTROANALYSIS, Issue 15 2007Laura Fernández-Llano Abstract A molecularly imprinted polymer for diclofenac (DCF) was prepared by thermal polymerization over silica beads using 2-(dimethylamino)ethyl-methacrylate as functional monomer. After silica elimination by HF treatment, the polymer was applied to the selective solid-phase extraction of the drug from urine followed by its quantification by adsorptive differential pulse voltammetry. Results indicate that the drug could be selectively extracted from the sample and quantified at clinically relevant concentrations (,g/mL). [source] Electrooxidation of DNA at Glassy Carbon Electrodes Modified with Multiwall Carbon Nanotubes Dispersed in ChitosanELECTROANALYSIS, Issue 7-8 2007Soledad Bollo Abstract We report on the analytical performance of glassy carbon (GCE) electrodes modified with a dispersion of multiwall carbon nanotubes (CNT) in chitosan (CHIT) for the quantification of DNA. The electroanalytical response of the resulting electrodes was evaluated using differential pulse voltammetry, while the electrochemical reactivity of the film surface was characterized using scanning electrochemical microscopy. Different treatments of the modified GCE were evaluated to improve the stability of the film and the accumulation of DNA. The guanine oxidation signal of double stranded calf-thymus DNA after 3-min accumulation was 20 times higher at GCE/CHIT-CNT cross-linked with glutaraldehyde (GTA) than at bare GCE, while the peak potential was around 45,mV less positive. The guanine oxidation signal demonstrated to be highly reproducible, with 3.4% RSD for 5 different electrodes. The treatment with sodium hydroxide demonstrated to be not effective since the resulting films were less stable and the guanine oxidation signal was ten times smaller compared to electrodes prepared with the GTA treated films. The effect of chitosan molecular weight used to prepare the dispersion and the amount of carbon nanotubes dispersed were evaluated. The response of single stranded DNA and oligo(dG)15 is also discussed. [source] Simultaneous Determination of Quinoline and Pyridine Compounds in Gasoline and Diesel by Differential Pulse VoltammetryELECTROANALYSIS, Issue 6 2007Leonardo Abstract The presence of trace basic organonitrogen compounds such as quinoline and pyridine in derivative petroleum fuels plays an important role in maintaining the engines of vehicles. However, these substances can contaminate the environment and so must be controlled because most of them are potentially carcinogenic and mutagenic. For these reasons, a reliable and sensitive method was developed for the determination of basic nitrogen compounds in fuel samples such as gasoline and diesel. This method utilizes preconcentration on an ion,exchange resin (Amberlyte IR,120,H) followed by differential pulse voltammetry (DPV) on a glassy carbon electrode. The electrochemical behavior of quinoline and pyridine as studied by cyclic voltammetry (CV) suggests that their reduction occurs via a reversible electron transfer followed by an irreversible chemical reaction. Very well resolved diffusion-controlled voltammetric peaks were obtained in dimethylformamide (DMF) with tetrabutylammonium tetrafluoroborate (TBAF4 0.1,mol L,1) for quinoline (,1.95,V) and pyridine (,2.52,V) vs. Ag|AgCl|KClsat reference electrode. The proposed DPV method displayed a good linear response from 0.10 to 300,mg L,1 and a limit of detection (LOD) of 5.05 and 0.25,,g L,1 for quinoline and pyridine, respectively. Using the method of standard additions, the simultaneous determination of quinoline and pyridine in gasoline samples yielded 25.0±0.3 and 33.0±0.7,mg L,1 and in diesel samples yielded 80.3±0.2 and 131±0.4,mg L,1, respectively. Spike recoveries were 94.4±0.3% and 101±0.5% for quinoline and pyridine, respectively, in the fuel determinations. This proposed method was also compared with UV-vis spectrophotometric measurements. Results obtained for the two methods agreed well based on F and t student's tests. [source] Electrocatalytic Oxidation and Voltammetric Determination of Hydrazine on the Tetrabromo- p -Benzoquinone Modified Carbon Paste ElectrodeELECTROANALYSIS, Issue 5 2007Jahan-Bakhsh Raoof Abstract The electrochemical properties of hydrazine studied at the surface of a carbon paste electrode spiked with p -bromanil (tetrabromo- p -benzoquinone) using cyclic voltammetry (CV), double potential-step chronoamperometry and differential pulse voltammetry (DPV) in aqueous media. The results show this quinone derivative modified carbon paste electrode, can catalyze the hydrazine oxidation in an aqueous buffered solution. It has been found that under the optimum conditions (pH,10.00), the oxidation of hydrazine at the surface of this carbon paste modified electrode occurs at a potential of about 550,mV less positive than that of a bar carbon paste electrode. The electrocatalytic oxidation peak current of hydrazine showed a linear dependent on the hydrazine concentrations and linear analytical curves were obtained in the ranges of 6.00×10,5 M,8.00×10,3 M and 7.00×10,6 M,8.00×10,4 M of hydrazine concentration with CV and differential pulse voltammetry (DPV) methods, respectively. The detection limits (3,) were determined as 3.6×10,5 M and 5.2×10,6 M by CV and DPV methods. This method was also used for the determination of hydrazine in the real sample (waste water of the Mazandaran wood and paper factory) by standard addition method. [source] Simultaneous and Direct Determination of Tryptophan and Tyrosine at Boron-Doped Diamond ElectrodeELECTROANALYSIS, Issue 8 2006Guohua Zhao Abstract A facile method for the simultaneous measurement of tryptophan (Trp) and tyrosine (Tyr) was firstly exploited at unmodified boron-doped diamond (BDD) electrode. The experimental results indicated that by using differential pulse voltammetry, the oxidative peaks of these two kinds of amino acids could be completely separated at BDD electrode. The peak separation of Trp and Tyr was developed to be 0.64,V when Na2PO4/NaOH buffer solution with the optimized pH,11.2 was employed. The detection limit of Trp was obtained to be 1×10,5,M, while that of Tyr was achieved to be 1×10,6,M. The present method was also evidenced to be available to the determination of real samples of amino acids. [source] Determination of Uric Acid in the Presence of Ascorbic Acid Using Poly(3,4-ethylenedioxythiophene)-Modified ElectrodesELECTROANALYSIS, Issue 24 2005Senthil Kumar, Shanmugam Abstract A poly(3,4-ethylenedioxythiophene) (PEDOT) modified glassy carbon electrode (GCE) was used to determine uric acid in the presence of ascorbic acid at physiological pH facilitating a peak potential separation of ascorbic acid and uric acid oxidation (ca. 365,mV), which is the largest value reported so far in the literature. Also, an analytical protocol involving differential pulse voltammetry has been developed using a microchip electrode for the determination of uric acid in the concentration range of 1 to 20,,M in presence of excess of ascorbic acid. [source] Electrochemical Evaluation of Nucleoside Analogue Lamivudine in Pharmaceutical Dosage Forms and Human SerumELECTROANALYSIS, Issue 20 2005Burcu Dogan Abstract Lamivudine (LAM) is a synthetic nucleoside analogue with activity against human immunodeficiency virus-type 1 (HIV-1) and Hepatitis B virus (HBV). The aim of this study was to determine LAM levels in serum and pharmaceutical formulations, by means of electrochemical methods using hanging mercury drop electrode (HMDE). On this electrode, LAM undergoes irreversible reduction at the peak potential near Ep,1.26,V (vs. Ag/AgCl/3,M KCl). Reduction LAM signals were measured by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square-wave voltammetry (OSW). DPV and OSW techniques for the determination of LAM in acetate buffer at pH,4.5, which allows quantitation over the 4×10,6 to 1×10,4,M range in supporting electrolyte for both methods, were proposed. The linear response was obtained in acetate buffer in the ranges of 2×10,6 to 2×10,4,M for spiked serum samples at pH,4.5 for both techniques. The repeatability and reproducibility of the methods for all media were determined. The standard addition method was used in serum. Precision and accuracy were also checked in all media. No electroactive interferences from the endogenous substances were found in serum. With respect to side effects of high doses and short half-life of LAM, a fast and simple detection method is described in this study. [source] Electrochemically-Induced Deposition of Amine-Functionalized Silica Films on Gold Electrodes and Application to Cu(II) Detection in (Hydro)Alcoholic MediumELECTROANALYSIS, Issue 19 2005Alain Walcarius Abstract Well-adherent amine-functionalized porous silica films have been deposited on gold electrodes by combining the self-assembly technology, the sol,gel process, and the electrochemical modulation of pH at the electrode/solution interface. A partial self-assembled monolayer of mercaptopropyl-trimethoxysilane (MPTMS) was first formed on disposable gold electrodes from recordable CDs (Au-CDtrodes). The so pretreated MPTMS-Au-CDtrodes were immersed in a stable sol solution (pH,3) containing (3-aminopropyl)-triethoxysilane (APTES) and tetraethoxysilane (TEOS). Polycondensation of the APTES and TEOS precursors was then achieved by applying a negative potential for a given period of time to generate a local pH increase at the electrode/solution interface and promote the deposition of the amine functionalized silica film adhering well to the electrode surface owing to the MPTMS monolayer acting somewhat as a "molecular glue". Various parameters affecting the electrodeposition process have been studied and the film permeability to redox probes in solution was characterized by cyclic voltammetry. The amine-functionalized silica film electrodes were then applied to the preconcentration of copper(II) species prior to their electrochemical detection by anodic stripping differential pulse voltammetry. Getting high sensitivity has however required the application of an electrochemical pre-activation step as the majority of the organo-functional groups were in the form of ammonium moieties (because the film was prepared from an acidic sol). This was achieved by applying a sufficiently negative potential to the electrode surface to reduce protons and increase consequently the amine-to-ammonium ratio within the film and, thus, the efficiency of the precocentration process. The resulting device was then optimized for copper(II) determination in hydroalcoholic medium, giving rise to a linear response in the 0.1,10,,M concentration range. [source] Differential Pulse Voltammetric Determination of Selenocystine Using Selenium-gold Film Modified ElectrodeELECTROANALYSIS, Issue 17 2005Yan Bai Abstract Differential pulse voltammetric determination of selenocystine (SeC) using selenium-gold film modified glassy carbon electrode ((Se-Au)/GC) is presented. In 0.10,mol,L,1 KNO3 (pH,3.20) solution, SeC yields a sensitive reduction peak at ,740,mV on (Se-Au)/GC electrode. The peak current has a linear relationship with the concentration of SeC in the range of 5.0×10,8,7.0×10,4,mol,L,1, and a 3, detection limit of SeC is 3.0×10,8,mol,L,1. The relative standard deviation of the reduction current at SeC concentration of 10,6,mol,L,1 is 3.88% (n=8) using the same electrode, and 4.19% when using three modified electrodes prepared at different times. The content of SeC in the selenium-enriched yeast and selenium-enriched tea is determined. The total selenium in ordinary or selenium-enriched tea is determined by DAN fluorescence method. The results indicate that in selenium-enriched yeast about 20% of total selenium is present as SeC and in selenium-enriched tea SeC is the major form of selenoamino acids. The total selenium content in selenium-enriched tea soup is 0.09,,gSe/g accounting by 7% compared with that in selenium-enriched tea. Hence, only a little amount of selenium is utilized by drinking tea, and most selenium still stay in tealeaf. Uncertainty are 22.4% and 16.1% for determination of SeC in selenium-enriched yeast and selenium-enriched tea by differential pulse voltammetry (DPV) on (Se-Au)/GC electrode, respectively. [source] Voltammetric Assay of Naproxen in Pharmaceutical Formulations Using Boron-Doped Diamond ElectrodeELECTROANALYSIS, Issue 11 2005V. Suryanarayanan Abstract The electrooxidation of naproxen was studied, for the first time, using boron-doped diamond (BDD) electrode by cyclic and differential pulse voltammetry (CV and DPV) in nonaqueous solvent supporting electrolyte system. The results were also compared with glassy carbon electrode (GC) under the same conditions. Naproxen undergoes one electron transfer resulting in the formation of cation radical for the first electrooxidation step, which follows other chemical and electrochemical steps such as deprotonation, removal of another electron and the attack of nucleophile (ECEC mechanism). BDD electrode provided higher signal to background ratio, well resolved and highly reproducible cyclic voltammograms than the GC electrode. With a scan rate of 50,mV s,1 and pulse height of 50,ms, respectively, the DPV technique was able to determine the naproxen concentrations in the range of 0.5 to 50,,M with a detection limit of 30,nM. The influence of interference compounds namely 2-acetyl-6-methoxy naphthalene (AMN) on naproxen oxidation can also be followed successfully. Moreover, the percentage of AMN present in the standard chemical form of a mixture containing naproxen can be found accurately. Rapidity, precise and good selectivity were also found for the determination of naproxen in pharmaceutical formulations. [source] A Selective Voltammetric Method for Uric Acid Detection at a Glassy Carbon Electrode Modified with Electrodeposited Film Containing DNA and Pt-Fe(III) NanocompositesELECTROANALYSIS, Issue 20 2004Shuqing Wang Abstract A novel biosensor by electrochemical codeposited Pt-Fe(III) nanocomposites and DNA film was constructed and applied to the detection of uric acid (UA) in the presence of high concentration of ascorbic acid (AA). Based on its strong catalytic activity toward the oxidation of UA and AA, the modified electrode resolved the overlapping voltammetric response of UA and AA into two well-defined peaks with a large anodic peak difference (,Epa) of about 380mV. The catalytic peak current obtained from differential pulse voltammetry (DPV) was linearly dependent on the UA concentration from 3.8×10,6 to 1.6×10,4,M (r=0.9967) with coexistence of 5.0×10,4,M AA. The detection limit was 1.8×10,6,M (S/N=3) and the presence of 20 times higher concentration of AA did not interfere with the determination. The modified electrode shows good sensitivity, selectivity and stability. [source] | |||||||||||||