Home About us Contact
|
Home About us Contact | ||
|
|
||
Delivery Applications (delivery + application)
Kinds of Delivery Applications Selected AbstractsMicroporous Silica Hollow Microspheres and Hollow Worm-Like Materials: A Simple Method for Their Synthesis and Their Application in Controlled ReleaseEUROPEAN JOURNAL OF INORGANIC CHEMISTRY, Issue 6 2010Mingwei Zhao Abstract Hollow silica microspheres and hollow worm-like materials were synthesized by using a simple method with the aid of 1-dodecyl-3-methylimidazolium bromide (C12mimBr). Hollow silica microspheres were initially produced by utilizing the combination of evaporation and an emulsion template. At a longer mixing time, the microspheres fused to form hollow worm-like silica materials due to the fusion of the emulsion templates. The resultant silica materials were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and nitrogen adsorption/desorption. Both the hollow silica microspheres and the hollow worm-like materials are microporous. On the basis of experimental observations and the resulting products, a plausible formation mechanism is proposed. Preliminary tests demonstrate that the hollow silica microspheres and worm-like materials are capable of being loaded with Rhodamine B and releasing it, thus showing a great potential in controlled delivery applications. [source] Photopolymerizable Hydrogels Made from Polymer-Conjugated Albumin for Affinity-Based Drug Delivery,ADVANCED ENGINEERING MATERIALS, Issue 1-2 2010Liat Oss-Ronen As a drug delivery vehicle, biodegradable albumin hydrogels can combine the high binding capacity of albumin with the structural stability of a polymeric hydrogel network to enable controlled release of small molecules based on both binding affinity and physical interactions. In the present study, we report on the development of a hybrid hydrogel composed of albumin conjugated to poly(ethylene glycol) (PEG) for drug delivery applications where controlled release is accomplished using the natural affinity of the drugs to the serum albumin. Bovine serum albumin was conjugated to PEG-diacrylate having a molecular weight of 1.5, 4, or 10,kDa to form a PEGylated albumin macromolecule (mono-PEGylated or multi-PEGylated). Biodegradable hydrogels were formed from the PEGylated albumin using photopolymerization. Two model drugs, Warfarin and Naproxen, were used for equilibrium dialysis and release experiments from the hydrogels, both having relatively low molecular weights and a known high affinity for albumin. Equilibrium dialysis experiments showed that multi-PEGylation of albumin significantly decreased the drug affinity to the protein compared to non-PEGylated controls, irrespective of the PEG molecular weight. However, the results from drug release experiments showed that mono-PEGylation of albumin did not change its natural affinity to the drug. Comparing the release profiles with a Fickian diffusion model provided strong evidence that hydrogels containing mono-PEGylated albumin exhibited sub-diffusive drug release properties based on the affinity of the drug to the tethered protein. [source] Tailoring Macromolecular Expression at Polymersome SurfacesADVANCED FUNCTIONAL MATERIALS, Issue 18 2009Adam Blanazs Abstract A series of amphiphilic ABC triblock copolymers are synthesized by atom transfer radical polymerization, wherein the ,A' and ,C' blocks are hydrophilic and the pH-sensitive ,B' block can be switched from hydrophilic in acidic solution to hydrophobic at pH 7. Careful addition of base to the molecularly dissolved copolymer in acidic solution readily induces the self-assembly of such triblock copolymers at around neutral pH to form pH-sensitive polymersomes (a.k.a. vesicles) with asymmetric membranes. By systematic variation of the relative volume fractions of the ,A' and ,C' blocks, the chemical nature of the polymer chains expressed at the interior or exterior corona of the polymersomes can be selected. Treatment of primary human dermal fibroblast cells with these asymmetric polymersomes demonstrates the biological consequences of such spatial segregation, with both polymersome cytotoxicity and endocytosis rates being dictated by the nature of the polymersome surface chemistry. The pH-sensitive nature of the polymersomes readily facilitates their dissociation after endocytosis due to the relatively low endosomal pH, which results in the rapid release of an encapsulated dye. Selective binding of anionic substrates such as DNA within the inner cationic polymersome volume, coupled with a biocompatible exterior, leads to potential gene delivery applications for these pH-sensitive asymmetric nanovectors. [source] Studies on the condensation of depolymerized chitosans with DNA for preparing chitosan-DNA nanoparticles for gene delivery applicationsJOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 2 2009Viola B. Morris Abstract High molecular weight chitosan (CS) was depolymerized by oxidative degradation with NaNO2 at room temperature to get 11 samples of CS derivatives of varying molecular weights with a view to assessing their effective molecular weight range for gene delivery applications. Viscosity studies indicated that the molecular weight of the depolymerized CS was proportional to the CS/NaNO2 ratio. The condensation behavior of DNA/CS complexes at various charge ratios was studied using UV spectroscopy, FTIR, CD, SEM, and AFM. The results indicated that CSs having very low molecular weights and high charge density exhibited strong binding affinity to DNA compared to high molecular weight CSs. However, the very low molecular weight (1.9,7.7 kDa) CSs were found to form aggregates easily even at very low charge ratios. On the other hand, CSs having medium molecular weight (49,51 kDa) and high degree of deacetylation (DD) gave stable uniform-sized nanoparticles. Biological studies carried out with the spherical nano-sized polyplexes formed between CS of 50 kDa (DD of 94%) and pEGFP plasmid DNA at N/P ratio of 5.0 showed excellent gene transfection efficiency at pH 6.5 in HeLa cells without cytotoxicity indicating their potential as genedelivery carriers. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009 [source] Poly(glutamic acid) poly(ethylene glycol) hydrogels prepared by photoinduced polymerization: Synthesis, characterization, and preliminary release studies of protein drugsJOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 1 2002Zhiqiang Yang Abstract A class of new biodegradable hydrogels based on poly(ethylene glycol) methacrylate-graft-poly(glutamic acid) and poly(ethylene glycol) dimethacrylate was synthesized by photoinduced polymerization. Because all the polymeric constituents were highly hydrophilic, crosslinking could be performed in aqueous solutions. This type of crosslinked hydrogel was prepared by modifying a select number of acidic side-groups on poly(glutamic acid) with poly(ethylene glycol) methacrylate. These modified chains were then crosslinked in the presence of poly(ethylene glycol) dimethacrylate under a photoinduced polymerization at a wavelength of 365 nm. Swelling experiments were conducted to study the crosslinking density, pH-responsive behavior, and degradation of the hydrogel. Results showed that the degree of swelling of this type of hydrogels increased as the crosslinker concentration (or density) was reduced. Because of the presence of acidic side chains on poly(glutamic acid), swelling behavior was found to be pH-responsive, increasing at high pH in response to the increase in the amount of ionized acidic side chains. The degradation rate of these hydrogels also varied with pH. More rapid degradation was observed under stronger alkaline conditions because of the hydrolysis of the ester bonds between the crosslinker and the polymer backbone. Practically useful degradation rates could be achieved for such hydrogels under physiological conditions. Drug release rates from these hydrogels were found to be proportional to the protein molecular weight and the crosslinker density; increasing at lower protein molecular weight or crosslinker density. The preliminary findings presented in this article suggest that this class of biodegradable hydrogels could be an attractive avenue for drug delivery applications. The specific photoinduced crosslinking chemistry used would permit hydrogels to be synthesized in existence of the entrapped macromolecular drugs including peptides, proteins, and cells. In addition, the rapid feature of this polymerization procedure along with the ability to perform hydrogel synthesis and drug loading in an aqueous environment would offer great advantages in retaining drug activity during hydrogel synthesis. © 2002 Wiley Periodicals, Inc. J Biomed Mater Res 62: 14,21, 2002 [source] Binding and release studies of a cationic drug from a star-shaped four-arm poly(ethylene oxide)- b -poly(methacrylic acid)JOURNAL OF PHARMACEUTICAL SCIENCES, Issue 2 2010E. He Abstract Star-shape polymers possess higher densities of terminal functional groups and three-dimensional tetrahedron structure that induce significantly different association and interactions with drug compared to linear structure of identical molecular weights. Four-arm poly(ethylene oxide)- b -poly(methacrylic acid) block copolymer was synthesized by atom transfer radical polymerization technique, and it self-assembled into core-shell micelles and extended unimers at low and high pH respectively. The negatively charged carboxylate groups on the polymer chains interacted with a cationic drug through electrostatic interaction forming polymer/drug complexes stabilized by biocompatible hydrophilic PEO segments. The hydrodynamic radius (Rh) of the polymeric aggregates and polymer/drug complexes ranged from 46 to 84,nm and 32 to 55,nm at pH of 4.6 and 8.0 respectively, making them suitable for drug delivery applications. The thermodynamic parameters and interactions between polymer and drug were determined by isothermal titration calorimetric technique. The electrostatic force, hydrogen bonding and hydrophobic interactions controlled the characteristics of polymer/drug formation and complexes when the molar ratios of drug and polymer were varied. Drug selective electrode system was used to measure the dynamic release of imipramine hydrochloride (IPH) from multi-arm PEO- b -PMAA star polymer. The release exponent n was greater than 0.5 indicating a non-Fickian type diffusion behavior, where the release behavior was dominated by chain relaxation induced by ion exchange that was dependent on pH. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99:782,793, 2010 [source] Solid-state solubility influences encapsulation and release of hydrophobic drugs from PLGA/PLA nanoparticlesJOURNAL OF PHARMACEUTICAL SCIENCES, Issue 7 2004Jayanth Panyam Abstract Biodegradable nanoparticles formulated from poly(D,L -lactide- co -glycolide) (PLGA) and polylactide (PLA) polymers are being extensively investigated for various drug delivery applications. In this study, we hypothesize that the solid-state solubility of hydrophobic drugs in polymers could influence their encapsulation and release from nanoparticles. Dexamethasone and flutamide were used as model hydrophobic drugs. A simple, semiquantitative method based on drug,polymer phase separation was developed to determine the solid-state drug,polymer solubility. Nanoparticles using PLGA/PLA polymers were formulated using an emulsion,solvent evaporation technique, and were characterized for size, drug loading, and in vitro release. X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC) were used to determine the physical state of the encapsulated drug. Results demonstrated that the solid-state drug,polymer solubility depends on the polymer composition, molecular weight, and end-functional groups (ester or carboxyl) in polymer chains. Higher solid-state drug,polymer solubility resulted in higher drug encapsulation in nanoparticles, but followed an inverse correlation with the percent cumulative drug released. The XRD and DSC analyses demonstrated that the drug encapsulated in nanoparticles was present in the form of a molecular dispersion (dissolved state) in the polymer, whereas in microparticles, the drug was present in both molecular dispersion and crystalline forms. In conclusion, the solid-state drug,polymer solubility affects the nanoparticle characteristics, and thus could be used as an important preformulation parameter. © 2004 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 93:1804,1814, 2004 [source] Preparation and characterization of a customized cellulose acetate butyrate dispersion for controlled drug deliveryJOURNAL OF PHARMACEUTICAL SCIENCES, Issue 6 2002Siva Vaithiyalingam Abstract The purpose of the present experiment was to prepare and characterize the aqueous-based pseudolatex system of cellulose acetate butyrate (CAB) for controlled drug delivery. Aqueous pseudolatex systems are advantageous over organic-based coating systems because these systems are devoid of criteria pollutants such as carbon monoxide, nitrogen oxides, nonmethane volatile organic compounds, and sulfur dioxide. Pseudolatex was prepared with CAB and polyvinyl alcohol (stabilizer) by a polymer emulsification technique. The stability of pseudolatex was evaluated. Particle size was measured and rheological experiments were conducted. The glass transition temperature, microscopic free volume, permeation coefficient, and mechanical properties of plasticized pseudolatex films were estimated. Surface roughness of coating on inert Nu-Pareil® beads (Ingredient Technology Corp., Mahwah, NJ) was measured as a function of coating weight gain. The CAB Pseudolatex was found to be stabilized by steric forces. From intrinsic viscosity, the thickness of the stabilization layer was estimated. An increase in polymeric particles proportionately decreased the thickness of the stabilization layer. All the essential properties of a coating membrane such as microscopic free-volume fraction, permeability coefficient, mechanical properties, and glass transition temperature were fairly controllable as a function of plasticizer concentration. The pseudolatex dispersion of CAB was stable with negligible sedimentation volume and a particle size of 300 nm. Because CAB is water insoluble and non-ionizable, this pseudolatex can be used for pH-independent coating. The films obtained were strong and flexible for controlled drug delivery applications. Coating with the CAB dispersion reduced the surface roughness of beads but it remained stable as a function of increase in coating weight gain. © 2002 Wiley-Liss, Inc. and the American Pharmaceutical Association J Pharm Sci 91:1512,1522, 2002 [source] Advances and potential applications of chitosan derivatives as mucoadhesive biomaterials in modern drug deliveryJOURNAL OF PHARMACY AND PHARMACOLOGY: AN INTERNATI ONAL JOURNAL OF PHARMACEUTICAL SCIENCE, Issue 8 2006Shruti Chopra Pharmaceutical technologists have been working extensively on various mucoadhesive polymeric systems to create an intimate and prolonged contact at the site of administration. Chitosan is one of the most promising polymers because of its non-toxic, polycationic biocompatible, biodegradable nature, and particularly due to its mucoadhesive and permeation enhancing properties. Due to its potential importance in controlled drug delivery applications, pharmaceutical scientists have exploited this mucoadhesive polymer. However, chitosan suffers from limited solubility at physiological pH and causes presystemic metabolism of drugs in intestinal and gastric fluids in the presence of proteolytic enzymes. These inherent drawbacks of chitosan have been overcome by forming derivatives such as carboxylated, various conjugates, thiolated, and acylated chitosan, thus providing a platform for sustained release formulations at a controlled rate, prolonged residence time, improved patient compliance by reducing dosing frequency, enhanced bioavailability and a significant improvement in therapeutic efficacy. We have explored the potential benefits of these improved chitosan derivatives in modern drug delivery. [source] Recent developments in carbohydrate-decorated targeted drug/gene deliveryMEDICINAL RESEARCH REVIEWS, Issue 2 2010Hailong Zhang Abstract Targeted delivery of a drug or gene to its site of action has clear therapeutic advantages by maximizing its therapeutic efficiency and minimizing its systemic toxicity. Generally, targeted drug or gene delivery is performed by loading a macromolecular carrier with an appropriate drug or gene, and by targeting the drug/gene carrier to specific cell or tissue with the help of specific targeting ligand. The emergence of glycobiology, glycotechnology, and glycomics and their continual adaptation by pharmaceutical scientists have opened exciting avenue of medicinal applications of carbohydrates. Among them, the biocompatibility and specific receptor recognition ability confer the ability of carbohydrates as potential targeting ligands for targeted drug and gene delivery applications. This review summarizes recent progress of carbohydrate-decorated targeted drug/gene delivery applications. © 2009 Wiley Periodicals, Inc. Med Res Rev, 30, No. 2, 270,289, 2010 [source] A Flexible Method for the Conjugation of Aminooxy Ligands to Preformed Complexes of Nucleic Acids and LipidsCHEMMEDCHEM, Issue 9 2008James Abstract Attachment of targeted ligands to nonviral DNA or RNA delivery systems is a promising strategy that seeks to overcome the poor target selectivity generally observed in systemic delivery applications. Several methods have been developed for the conjugation of ligands to lipids or polymers, however, direct conjugation of ligands onto lipid, or polymer,nucleic acid complexes is not as straightforward. Here, we examine an oximation approach to directly label a lipoplex formulation. Specifically, we report the synthesis of a cationic diketo lipid DMDK, and its use as a convenient ligation tool for attachment of aminooxy-functionalized reagents after its complexation with DNA. We demonstrate the feasibility of direct lipoplex labeling by attaching an aminooxy-functionalized fluorescent probe onto pre-formed plasmid DNA,DMDK lipoplexes (luciferase, GFP). The results reveal that DMDK protects DNA from degradation on exposure to either DNase or human cerebral spinal fluid, and that simple mixing of DMDK lipoplexes with the aminooxy probe labels the complexes without sacrificing transfection efficiency. The biocompatibility and selectivity of this method, as well as the ease of bioconjugation, make this labeling approach ideal for biological applications. [source] | |||||||||||||