Home About us Contact
|
Home About us Contact | ||
|
|
||
Adhesion Strength (adhesion + strength)
Selected AbstractsAdhesion control for injection overmolding of polypropylene with elastomeric ethylene copolymersPOLYMER ENGINEERING & SCIENCE, Issue 10 2009Marco Dondero Two types of random semicrystalline copolymers (ethylene,octene and ethylene,butene) were overmolded on a core polypropylene. Maximum solid,liquid interface temperature achieved for the overmolding injection process is used as the key parameter for adhesion control. The main bonding process is shown to be a Rouse-type fingering mechanism that develops in short time scales. Normalized peel tests were conducted on overmolded samples to measure the resulting polypropylene copolymers' bonding strength. All the ethylene random copolymers used for this study give good adhesion to polypropylene in overmolding processes, provided the right range of interface temperature is reached. Adhesion strength can be easily controlled for efficient debonding and recycling of used overmolded parts. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers [source] Interaction of Zoospores of the Green Alga Ulva with Bioinspired Micro- and Nanostructured Surfaces Prepared by Polyelectrolyte Layer-by-Layer Self-AssemblyADVANCED FUNCTIONAL MATERIALS, Issue 12 2010Xinyu Cao Abstract The interaction of spores of Ulva with bioinspired structured surfaces in the nanometer,micrometer size range is investigated using a series of coatings with systematically varying morphology and chemistry, which allows separation of the contributions of morphology and surface chemistry to settlement (attachment) and adhesion strength. Structured surfaces are prepared by layer-by-layer spray-coating deposition of polyelectrolytes. By changing the pH during application of oppositely charged poly(acrylic acid) and polyethylenimine polyelectrolytes, the surface structures are systematically varied, which allows the influence of morphology on the biological response to be determined. In order to discriminate morphological from chemical effects, surfaces are chemically modified with poly(ethylene glycol) and tridecafluoroctyltriethoxysilane. This chemical modification changes the water contact angles while the influence of the morphology is retained. The lowest level of settlement is observed for structures of the order 2,µm. All surfaces are characterized with respect to their wettability, chemical composition, and morphological properties by contact angle measurement, X-ray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy. [source] Wet and Dry Adhesion Properties of Self-Selective Nanowire ConnectorsADVANCED FUNCTIONAL MATERIALS, Issue 19 2009Hyunhyub Ko Abstract Here, the wet and dry adhesion properties of hybrid Ge/parylene nanowire (NW) connectors are examined. The ability of the NW connectors to bind strongly even under lubricating conditions, such as mineral oil, sheds light on the dominant role of van der Waals interactions in the observed adhesion. The superhydrophobic surface of the NW connectors enables the wet, self-cleaning of contaminant particles from the surface, similar to the lotus effect. In addition, the effect of NW length on the shear adhesion strength, repeated usability, and robustness of the connectors, all critical properties for applications that require reversible binding of components, is examined. [source] A new method for measuring ice adhesion strength at an ice,substrate interfaceHYDROLOGICAL PROCESSES, Issue 4 2006M. Javan-Mashmool Abstract This research focuses on the development of a direct technique for measuring atmospheric ice adhesion strength using embedded piezoelectric film sensors at the ice-substrate interface. The substrate is a small aluminium beam on which PVDF piezoelectric sensors are bonded. The composite beam formed by aluminium and an ice layer is submitted to sinusoidal stress at the interface by a shaker on which one end of the beam is clamped. The piezoelectric charge coefficient is used to predict the electric charge density induced on the piezoelectric film, which enables us to develop a macroscopic and direct measurement technique for determining mechanical stresses at the atmospheric-ice-substrate interface. The preliminary results obtained show that adhesive failure was obtained for each test for a frequency close to the natural resonance frequency of the aluminium beam. Within the limitations of the experimental conditions, it was possible using this approach to obtain ice adhesion strengths in accordance with those obtained in the literature. This demonstrates the feasibility of this simple ice adhesion testing method. Copyright © 2006 John Wiley & Sons, Ltd. [source] Bioactive and mechanically strong Bioglass®-poly(D,L -lactic acid) composite coatings on surgical suturesJOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 2 2006Q. Z. Chen Abstract New coating processes have been investigated for degradable (Vicryl®) and nondegradable (Mersilk®) sutures with the aim to develop Bioglass® coated polymer fibers for wound healing and tissue engineering scaffold applications. First, the aqueous phase of a Bioglass® particle slurry was replaced with a poly(D,L -lactic acid) (PDLLA) polymer dissolved in solvent dimethyle carbonate (DMC) to act as third phase. SEM observations indicated that this alteration significantly improved the homogeneity of the coatings. Second, a new coating strategy involving two steps was developed: the sutures were first coated with a Bioglass®,PDLLA composite film followed by a second PDLLA coating. This two-step process of coating has addressed the problem of poor adherence of Bioglass® particles on suture surfaces. The coated sutures were knotted to determine qualitatively the mechanical integrity of the coatings. The results indicated that adhesion strength of coatings obtained by the two-step method was remarkably enhanced. A comparative assessment of the bioactivity of one-step and two-step produced coatings was carried out in vitro using acellular simulated body fluid (SBF) for up to 28 days. Coatings produced by the two-step process were found to have similar bioactivity as the one-step produced coatings. The novel Bioglass®/PDLLA/Vicryl® and Bioglass®/PDLLA/Mersilk® composite sutures are promising bioactive materials for wound healing and tissue engineering applications. © 2005 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2006 [source] If pemphigus vulgaris IgG are the cause of acantholysis, new IgG-independent mechanisms are the concauseJOURNAL OF CELLULAR PHYSIOLOGY, Issue 3 2007Nicola Cirillo Pemphigus vulgaris (PV) is a disease of epidermal adhesion. Its pathogenesis is currently traced back to the action of autoantibodies against antigens located within the intercellular substance of keratinocytes, such as desmogleins and acetylcholine receptors. In the present paper, we sought to elucidate the non-IgG-mediated effects of PV sera on keratinocytes. Results showed that PV sera depleted of IgG were able to induce well-defined changes on keratinocyte morphology and metabolic activity. Indeed, PV IgG-free sera determined marked alterations on cell shape, accompanied by partial loss of keratinocyte,keratinocyte interactions within 48 h after treatment. Furthermore, PV IgG-depleted sera caused a sharp reduction of cell viability along with a less sustained weakening of intercellular adhesion strength. In light of the above findings, loss of cell,cell adhesion in PV occurs as a result of the cooperating action of both IgG and non-IgG-mediated mechanisms. These data have remarkable consequences on experimental models of PV and might open new "biological" approaches to its therapy. Thus, researchers are well advised that PV pathophysiology cannot be faithfully reproduced by leaving non-IgG serum factors out of consideration. J. Cell. Physiol. 212:563,567, 2007. © 2007 Wiley-Liss, Inc. [source] Interfacial adhesion between polymer separation layer and ceramic support for composite membraneAICHE JOURNAL, Issue 6 2010Wang Wei Abstract An in situ characterization method for mechanical and adhesive properties of organic/ceramic composite membranes is built on the basis of nanoindentation technique in this work. The polydimethylsiloxane (PDMS) was used as the separation layer with the support of porous ZrO2/Al2O3 ceramic tubes. The effects of roughness of the ceramic support and the viscosity of PDMS solution on the mechanical properties of the PDMS separation layer and the interfacial adhesion at the interface were investigated in detail. It was found that when the roughness of the ceramic support increased and the viscosity of PDMS solution decreased, the interfacial adhesion strength of PDMS/ceramic composite membrane increased, but these two variables had little effect on the mechanical properties of the PDMS separation layer. Our results indicate that the mechanical interlocking dominates the adhesion between the PDMS separation layer and the porous ceramic support. © 2009 American Institute of Chemical Engineers AIChE J, 2010 [source] Modeling cell adhesion to a substrate with gradient in ligand densityAICHE JOURNAL, Issue 11 2009Alireza S. Sarvestani Abstract Surface density profile of bioadhesive ligands greatly influences spreading and migration of cells on substrates. A 1D peeling model is developed to predict the equilibrium adhesion strength and peeling tension of a cell membrane, adhered on a substrate with linearly increasing density of ligands. Cell membrane is modeled as a linear elastic shell subjected to a tensile force applied at the free extremity and adhesive traction due to specific receptor-ligand interactions with the substrate. Membrane peeling tension increased with gradient slope and reached an asymptotic limit independent of gradient slope but proportional to receptor-ligand interaction energy. Peeling tension from substrates with negative gradient slope, at the rear edge of adhesion zone, was considerably lower than the tension from substrates with positive gradient slope at the leading edge, indicating that detachment is more likely to be initiated at the rear edge. This prediction leads to a possible mechanism for experimentally observed haptotactic locomotion of motile cells toward the direction of higher ligand density. © 2009 American Institute of Chemical Engineers AIChE J, 2009 [source] Creep Behavior of Plasma-Sprayed Zirconia Thermal Barrier CoatingsJOURNAL OF THE AMERICAN CERAMIC SOCIETY, Issue 9 2007Reza Soltani Thermally sprayed ceramic coatings deposited from nanostructured feedstock powder have often demonstrated improved properties relative to coatings produced from conventional powders. This type of coating has been reported to exhibit better wear resistance and higher adhesion strength compared with conventional deposits. Powder consisting of hollow spherical particles has been reported to produce coating with lower unmelted particles and lower thermal conductivity. In this study, the thermo-mechanical properties of plasma-sprayed yttria-stabilized zirconia coatings deposited using each of these types of powder were investigated. Creep strain and creep rate were measured using free-standing thick coatings loaded in a four-point bend configuration at temperatures ranging from 800° to 1200°C in air under a range of loads. The creep exponent and activation energy were determined. [source] Waste and Virgin LDPE/PET Blends Compatibilized with an Ethylene-Butyl Acrylate-Glycidyl Methacrylate (EBAGMA) Terpolymer, 1MACROMOLECULAR MATERIALS & ENGINEERING, Issue 10 2005Mustapha Kaci Abstract Summary: This work is aimed at studying the morphology and the mechanical properties of blends of low density polyethylene (LDPE) and poly(ethylene terephthalate) (PET) (10, 20, and 30 wt.-% of PET), obtained as both virgin polymers and urban plastic waste, and the effect of a terpolymer of ethylene-butyl acrylate-glycidyl methacrylate (EBAGMA) as a compatibilizer. LDPE and PET are blended in a single screw extruder twice; the first extrusion to homogenize the two components, and the second to improve the compatibilization degree when the EBAGMA terpolymer is applied. Scanning electron microscopy (SEM) analysis shows that the fractured surface of both the virgin polymer and the waste binary blends is characterized by a gross phase segregation morphology that leads to the formation of large PET aggregates (10,50 µm). Furthermore, a sharp decrease in the elongation at break and impact strength is observed, which denotes the brittleness of the binary blends. The addition of the EBAGMA terpolymer to the binary LDPE/PET blends reduces the size of the PET inclusions to 1,5 µm with a finer dispersion, as a result of an improvement of the interfacial adhesion strength between LDPE and PET. Consequently, increases of the tensile properties and impact strength are observed. SEM micrographs of the fracture surface of a waste 70/30 LDPE/PET blend (R30) and of its blend with 15 pph of EBAGMA (R30C). Magnification,×,1,000. [source] Interface Structure between Immiscible Reactive Polymers under Transreaction: a Monte Carlo SimulationMACROMOLECULAR THEORY AND SIMULATIONS, Issue 5 2005Xuehao He Abstract Summary: The interface structure between two immiscible melts, a polycondensate polymer A (e.g., polycarbonate, polyester or polyamide) and a polymer B, was studied by means of Monte Carlo simulations using the bond fluctuation model. Polymer B contained a reactive end group (e.g., OH, NH2 or COOH). Copolymers were generated in-situ at the interfaces by transreactions (alcoholysis, aminolysis or acidolysis), composing of various length of block A, depending on the position of transreaction in the polycondensate chain A. The content of copolymer at the interface increased with the time, particular fast at the early stage. Fragments of polymers A were released with an end group, reactive to polymers A. This resulted in the proceeding of internal transreactions. An asymmetric interface structure was formed. The simulation also showed that copolymers generated by interfacial transreactions increased the compatibility of the two polymers and enhanced the adhesion strength at the interfaces. [source] Nm23-H1 promotes adhesion of CAL 27 cells in vitroMOLECULAR CARCINOGENESIS, Issue 9 2009ica Bago Abstract nm23-H1 was found to diminish metastatic potential of carcinoma cell lines and therefore was placed in the group of metastatic suppressor genes. Its protein product has a function of a nucleoside diphosphate kinase (NDPK) as well as protein kinase and nuclease. Though it was found that Nm23-H1 is involved in many cellular processes, it is still not known how it promotes metastatic suppressor activity. Since the process of metastasis is dependent on adhesion properties of cells, the goal of our work was to describe the adhesion properties of CAL 27 cells (oral squamous cell carcinoma of the tongue) overexpressing FLAG/nm23-H1. In our experiments, cells overexpressing nm23-H1 show reduced migratory and invasive potential. Additionally, cells overexpressing nm23-H1 adhere stronger on substrates (collagen IV and fibronectin) and show more spread morphology than the control cells. Results obtained by EGF induction of migration revealed that the adhesion strength predetermined cell response to chemoattractant and that Nm23-H1, in this cell type, does not interfere with, EGF induced, Ras signaling pathway. These data contribute to the overall knowledge about nm23-H1 and its role in cell adhesion, migration, and invasion, especially in oral squamous cell carcinoma. © 2009 Wiley-Liss, Inc. [source] Delamination of multilayer packaging caused by exfoliating cream ingredientsPACKAGING TECHNOLOGY AND SCIENCE, Issue 3 2007Gustavo Ortiz Abstract Exfoliating creams were packed in sachets of composite packaging consisting of polyethylene, aluminium and polyester layers stuck together by polyurethane adhesive, and they were kept in an oven at 40°C in order to accelerate the delamination process. The sachets were then delaminated and the resulting layers were analysed. A headspace solid-phase microextraction mass spectrometry method (HS,SPME,GC,MS) using a 75µm carboxen polydimethylsiloxane fibre was used to identify the compounds migrating from the exfoliating creams through the polyethylene layer to the aluminium interface and suspected to be responsible for packaging delamination. Several volatile compounds used in the cosmetic industry as perfumes, fixing agents and preservatives, such as menthol, dihydromyrcenol and 2-phenoxyethanol, were detected in the aluminium/polyester delaminated layer. The exfoliating creams were also analysed by HS,SPME,GC,MS. The study of loss of adhesion of the laminated material exposed to the exfoliating products revealed that the product with a higher concentration of 2-phenoxyethanol caused a faster decrease in adhesion strength, but the lower adhesion values were found in products with higher concentrations of menthol and dihydromyrcenol. The results obtained showed that the analytical method used was suitable for identifying volatile compounds that migrate through polyethylene to the inner layers of the packaging of exfoliating products, as well as for providing prior information on which products may be difficult to package in sachets. Copyright © 2006 John Wiley & Sons, Ltd. [source] Comparison of flat film to total package water vapour transmission rates for several commercial food wrapsPACKAGING TECHNOLOGY AND SCIENCE, Issue 1 2002Matthew D. Steven Abstract The barrier properties of a package are the sum of material and seal permeations. Although addressed for hermetically sealed and modified atmosphere packages, little consideration of total package permeation has been given to commercial food wraps. Standard protocols were used to compare the water vapour transmission rates (WVTRs) of materials and packages for seven commercial food wraps: aluminum foil; poly(vinylidene chloride) (PVdC) film; three poly(ethylene) (PE) films; an adhesive-modified PE film; and plasticized poly(vinyl chloride) (PVC) film. Water ingress for a complete package was compared to calculated material permeation based on film WVTRs. Film-to-glass adhesion strength was also measured. Model systems (desiccant) were compared to foods at ambient and refrigeration temperatures. Aluminum foil had the lowest material WVTR (0.10 g/h/m2), closely followed by PVdC (0.13 g/h/m2). These WVTRs were approximately five-fold lower than the PEs (,0.65 g/h/m2), which were nearly 10-fold lower than PVC (4.9 g/h/m2). The adhesive-modified PE film had the lowest difference between material and package transmission rates (0.7 E-03 g/h), approximately half that of the PVdC film (1.1 E-03 g/h), which was significantly lower than the remaining films (2.3 E-03 ,3.9 E-03 g/h). The adhesive PE film had the strongest film,glass adhesion. Ambient food product test results were similar to model system (desiccant) results, but refrigerated trials showed significantly different relative package transmission rates. This was attributed to the reduced adhesion of most wraps at refrigeration temperatures. Copyright © 2002 John Wiley & Sons, Ltd. [source] Interaction of Plasma Deposited HMDSO-Based Coatings with Fibrinogen and Human Blood Plasma: The Correlation between Bulk Plasma, Surface Characteristics and Biomolecule InteractionPLASMA PROCESSES AND POLYMERS, Issue 5 2010Ram P. Gandhiraman Abstract The success of a biomaterial depends on the nature of interaction and the progressive reaction between the biological components and the surface of the biomaterial. In order to control the interaction between the biomaterial and biological component, it is necessary to understand the factors that influence the protein adsorption and cell proliferation. Surface chemistry plays a crucial role in the success of any blood contacting biomaterial. Plasma enhanced chemical vapour deposition (PECVD) is an interesting commonly used technique for tailoring surface characteristics while retaining bulk material properties. Two different films, namely polymer-like and silica-like coatings, with varying surface characteristics have been deposited from hexamethyldisiloxane, by PECVD, on 316L stainless steel. A correlation between the bulk plasma, interfacial adhesion of the coating to 316L steel, surface characteristics and biomolecule interaction is presented in this work. The interfacial adhesion strength analysis demonstrated that silica-like coatings have higher adhesion strength to 316L stainless steel than polymer-like coatings, caused due to the formation of a strong FeOSi and CrOSi bonds. It was observed that the effect of nanoscale surface roughness (close to 6,nm) was less significant, and that the surface chemistry played a significant role in governing the fibrinogen adsorption. Highest fibrinogen adsorption on plain steel was due to the electrostatic interaction of the metal oxide layer with the protein. Hydrophobicity of the polymer-like film resulted in a higher fibrinogen binding than the silica-like films. [source] Interfacial adhesion and molecular diffusion in melt lamination of wood sawdust/ebonite NR and EPDMPOLYMER COMPOSITES, Issue 3 2009W. Yamsaengsung Adhesion mechanisms and peel strengths of wood/ebonite NR-EPDM laminates were investigated. Three different chemical coupling agents: namely; N-(, aminoethyl)-,-aminopropyl-triethoxysilane (AAS), 3-methacryloxypropyl trimethoxysilane (ACS), and Bis-(3-triethoxylpropyl) tetrasulfan (Si69) were introduced into the wood/NR composites to enhance an interaction between wood sawdust (SD) particles and NR molecules, and to improve the adhesion strength between the SD/NR and EPDM layers. The quantitative evidences were given to explain the changes in the adhesion or peel strengths of the SD/NR-EPDM laminates through scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDS). The experimental results indicated that the suitable cure time and cure temperature for SD/NR-EPDM melt-laminates were the tc90 of SD/NR composites and 140°C, respectively. The Si69 coupling agent was found to be the most effective coupling agent as compared with AAS and ACS coupling agents. The Si69 of 0.5 wt% was recommended for the optimizations of the tensile modulus of the SD/NR composites and the peel strength of the SD/NR-EPDM laminates. The diffusion level between the SD/NR and EPDM layers could be quantitatively substantiated by determining the sulfur content transfer from the SD/NR layer to the EPDM layer. The diffusion and entanglement of molecular chains from the SD/NR to the EPDM layer initiated the co-crosslinking reaction which played an important role on the changes in the interfacial strength in the SD/NR-EPDM melt-laminates. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers [source] Interfacial characteristics of film insert molded polycarbonate film/polycarbonate-acrylonitrile-butadiene-styrene substrate, part 1: Influence of substrate molecular weight and film thicknessPOLYMER ENGINEERING & SCIENCE, Issue 12 2006Y.W. Leong Adhesion properties between a polycarbonate (PC)/acrylonitrile-butadiene-styrene blend substrate and PC films of various thicknesses, bonded through film insert molding, were investigated. The use of various molecular weights of PC and incorporation of PC-oligomer in the blend substrate has been found to severely affect the adhesion strength and alter the delamination characteristics at the film,substrate interface. Thicker films were able to increase film,substrate adhesion, apart from providing added impact resistance to a brittle substrate. Polym. Eng. Sci. 46:1674,1683, 2006. © 2006 Society of Plastics Engineers [source] Effect of hybrid network formation on adhesion properties of polycyanurate/polyurethane semi-interpenetrating polymer networksPOLYMER ENGINEERING & SCIENCE, Issue 12 2002O. Grigoryeva The adhesion characteristics of modified polycyanurates based on the principle of semi-interpenetrating polymer networks (semi-IPNs) have been studied. It has been shown that the formation of a polycyanurate network in the presence of linear polyurethane (LPU) leads to increasing adhesion strength to aluminum and titanium. The peculiarities of polycyanurate network (PCN) formation in the presence of different amounts of LPU are discussed. It has been found that chemical incorporation of LPU into PCN occurs during network formation owing to chemical interaction of urethane groups with cyanate groups of growing PCN. At LPU content in the initial composition up to around 20 wt% only a hybrid network is formed. The maximal values of adhesive strength to aluminum and titanium are achieved at LPU content of 20,25%, corresponding to formation of a hybrid network. The further increase of LPU content leads to the presence of non-incorporated LPU (semi-IPN formation) in the adhesive layer and to reduction of the adhesive strength. [source] A new method for measuring ice adhesion strength at an ice,substrate interfaceHYDROLOGICAL PROCESSES, Issue 4 2006M. Javan-Mashmool Abstract This research focuses on the development of a direct technique for measuring atmospheric ice adhesion strength using embedded piezoelectric film sensors at the ice-substrate interface. The substrate is a small aluminium beam on which PVDF piezoelectric sensors are bonded. The composite beam formed by aluminium and an ice layer is submitted to sinusoidal stress at the interface by a shaker on which one end of the beam is clamped. The piezoelectric charge coefficient is used to predict the electric charge density induced on the piezoelectric film, which enables us to develop a macroscopic and direct measurement technique for determining mechanical stresses at the atmospheric-ice-substrate interface. The preliminary results obtained show that adhesive failure was obtained for each test for a frequency close to the natural resonance frequency of the aluminium beam. Within the limitations of the experimental conditions, it was possible using this approach to obtain ice adhesion strengths in accordance with those obtained in the literature. This demonstrates the feasibility of this simple ice adhesion testing method. Copyright © 2006 John Wiley & Sons, Ltd. [source] Influence of inter-fiber spacing and interfacial adhesion on failure of multi-fiber model composites: Experiment and numerical analysisPOLYMER COMPOSITES, Issue 9 2008Hongzhou Li The uniaxial tension experiments on glass-fiber-reinforced epoxy matrix composites reveal that the fragmentations of fibers display vertically aligned fracture, clustered fracture, coordinated fracture, and random fracture with the increase of inter-fiber spacing. The finite element analysis indicates that the fragmentations of fibers displaying different phenomena are due to the stress concentration as well as the inherent randomness of fiber defects, which is the dominant factor. The experimental results show that matrices adjacent to the fiber breakpoints all exhibit birefringent-whitening patterns for the composites with different interfacial adhesion strengths. The larger the extent of the interfacial debonding, the less the domain of the birefringent-whitening patterns. The numerical analysis indicates that the orientation of the matrix adjacent to a fiber breakpoint is caused by the interfacial shear stress, resulting in the birefringent-whitening patterns. The area of shear stress concentrations decides on the domain of the birefringent-whitening patterns. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers [source] | |||||||||||||