			Home About us Contact

Collagen Sponge (collagen + sponge)

Distribution by Scientific Domains

Medical Sciences	29%
Life Sciences	23%

Selected Abstracts

Control of pore structure and size in freeze-dried collagen sponges

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 4 2001
Heike Schoof
Abstract Because of many suitable properties, collagen sponges are used as an acellular implant or a biomaterial in the field of tissue engineering. Generally, the inner three-dimensional structure of the sponges influences the behavior of cells. To investigate this influence, it is necessary to develop a process to produce sponges with a defined, adjustable, and homogeneous pore structure. Collagen sponges can be produced by freeze-drying of collagen suspensions. The pore structure of the freeze-dried sponges mirrors the ice-crystal morphology after freezing. In industrial production, the collagen suspensions are solidified under time- and space-dependent freezing conditions, resulting in an inhomogeneous pore structure. In this investigation, unidirectional solidification was applied during the freezing process to produce collagen sponges with a homogeneous pore structure. Using this technique the entire sample can be solidified under thermally constant freezing conditions. The ice-crystal morphology and size can be adjusted by varying the solute concentration in the collagen suspension. Collagen sponges with a very uniform and defined pore structure can be produced. Furthermore, the pore size can be adjusted between 20,40 ,m. The thickness of the sponges prepared during this research was 10 mm. © 2001 John Wiley & Sons, Inc. J Biomed Mater Res (Appl Biomater) 58: 352,357, 2001 [source]

In vitro interactions between sensory nerves, epidermis, hair follicles and capillaries in a tissue-engineered reconstructed skin

EXPERIMENTAL DERMATOLOGY, Issue 9 2004
V. Gagnon
Recent findings have established that cutaneous nerves modulate both skin homeostasis and various skin diseases, by influencing cell growth and differentiation, inflammation and wound healing. In order to study the influence of epidermis, hair follicles and capillaries on sensory neurons, and vice-versa, we developed a tissue-engineered model of innervated endothelialized reconstructed skin (MIERS). Mouse dorsal root ganglia neurons were seeded on a collagen sponge populated with human fibroblasts and human endothelial cells. Keratinocytes or mice newborn immature hair follicle buds were then seeded on the opposite side of the MIERS to study their influence on sensory nerves growth, and vice versa. A vigorous neurite elongation was detected inside the reconstructed dermis after 14 and 31 days of neurons culture. The presence of endothelial cells induced a significant increase of the neurite elongation after 14 days of culture. The addition of human keratinocytes totally avoided the twofold decrease in the amount of neurites observed between 14 and 31 days in controls. We have successfully developed the MIERS that allowed us to study the effects of epidermis and capillaries on nerve growth. This model will be a useful tool to study the modulation of sensory nerves on wound healing, angiogenesis, hair growth and neurogenic inflammation in the skin. [source]

Regeneration of canine peroneal nerve with the use of a polyglycolic acid,collagen tube filled with laminin-soaked collagen sponge: a comparative study of collagen sponge and collagen fibers as filling materials for nerve conduits

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 6 2001
Toshinari Toba
Abstract A novel artificial nerve conduit was developed and its efficiency was evaluated on the basis of promotion of peripheral nerve regeneration across an 80-mm gap in dogs. The nerve conduit was made of a polyglycolic acid,collagen tube filled with laminin-soaked collagen sponge. Conduits filled with either sponge- or fiber-form collagen were implanted into an 80-mm gap of the peroneal nerve (five dogs for each form). Twelve months postoperatively nerve regeneration was superior in the sponge group both morphometrically (percentage of neural tissue: fiber: 39.7 ± 5.2, sponge: 43.0 ± 4.5, n=3) and electrophysiologically (fiber: CMAP 1.06 ± 0.077, SEP 1.32 ± 0.127 sponge: CMAP 1.04 ± 0.106, SEP 1.24 ± 0.197, n=5), although these differences were not statistically significant. The observed regeneration was complementary to successful results reported previously in the same model, in which collagen fibers exclusively were used. The results indicate a possible superiority of collagen sponge over collagen fibers as filling materials. In addition, the mass-producibility, superior scaffolding potential, and capacity for gradual release of soluble factors of the sponge provide make it an attractive alternative to fine fibers, which are both technologically difficult and costly to produce. This newly developed nerve conduit has the potential to enhance peripheral nerve regeneration across longer gaps commonly encountered in clinical settings. © 2001 John Wiley & Sons, Inc. J Biomed Mater Res (Appl Biomater) 58: 622,630, 2001 [source]

Serological analysis of patients treated with a new surgical hemostat containing bovine proteins and autologous plasma ,

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, Issue 6 2001
Patricia A. Nelson
Abstract A randomized, controlled clinical study of the management of diffuse bleeding with CoStasis® surgical hemostat, a new hemostat containing bovine thrombin and collagen with the patient's own plasma, included patients undergoing cardiac, hepatic, iliac, and general surgery. Sera from 92 patients treated with CoStasis and 84 control patients were collected preoperatively and at a post surgical follow-up of 8 weeks. Among the control group, 57 patients were treated with Instat® collagen sponge in noncardiac indications. Results showed that antibody responses in the CoStasis clinical study were similar to the reported literature for all antigens screened and were not associated with any adverse reactions. The bovine thrombin preparations in CoStasis and other commercially available thrombins were compared with the use of SDS-PAGE and Western blot analyses. Within this clinical study, CoStasis was shown to be a safe and effective hemostatic product containing bovine thrombin and bovine collagen and no pooled human blood products. © 2001 John Wiley & Sons, Inc. J Biomed Mater Res (Appl Biomater) 58: 710,719, 2001 [source]

Periodontal repair in dogs: space-providing ePTFE devices increase rhBMP-2/ACS-induced bone formation

JOURNAL OF CLINICAL PERIODONTOLOGY, Issue 8 2003
Ulf M.E. Wikesjö
Abstract Background: Recombinant human bone morphogenetic protein-2 (rhBMP-2) technologies have been shown to enhance alveolar bone formation significantly. Biomaterial (carrier) limitations, however, have restricted their biologic potential for indications where compressive forces may limit the volume of bone formed. The objective of this proof-of-principle study was to evaluate the potential of a space-providing, macroporous ePTFE device to define rhBMP-2-induced alveolar bone formation using a discriminating onlay defect model. Methods: Routine, critical size, 5,6 mm, supra-alveolar, periodontal defects were created around the third and fourth mandibular premolar teeth in four young adult Hound Labrador mongrel dogs. All jaw quadrants received rhBMP-2 (0.4 mg) in an absorbable collagen sponge (ACS) carrier. Contralateral jaw quadrants in subsequent animals were randomly assigned to receive additionally the dome-shaped, macroporous ePTFE device over the rhBMP-2/ACS implant or no additional treatment. The gingival flaps were advanced to cover the ePTFE device and teeth, and sutured. Animals were scheduled for euthanasia to provide for histologic observations of healing at 8 weeks postsurgery. Results: Healing was uneventful without device exposures. New bone formation averaged (±SD) 4.7±0.2 mm (98%) and 4.5±0.4 mm (94%) of the defect height, respectively, for jaw quadrants receiving rhBMP-2/ACS with the ePTFE device or rhBMP-2/ACS alone (p>0.05). In contrast, the regenerated bone area was significantly enhanced in jaw quadrants receiving rhBMP-2/ACS with the ePTFE device compared to rhBMP-2/ACS alone (9.3±2.7 versus 5.1±1.1 mm2; p<0.05). Cementum formation was similar for both treatment groups. Ankylosis compromised periodontal regeneration in all sites. Conclusions: The results suggest that the novel space-providing, macroporous ePTFE device appears suitable as a template to define rhBMP-2/ACS-induced alveolar bone formation. Zusammenfassung Hintergrund: Es wurde gezeigt, dass das rekombinante menschliche knochenmorphogenetische Protein 2 (rhBMP-2) die alveoläre Knochenbildung signifikant erhöht. Limitationen des Biomaterials (Träger) haben jedoch die biologischen Potenzen des Materials für die Indikationen, wo komprimierende Kräfte das Volumen des zu bildenden Knochen limitierten, eingeengt. Das Ziel dieser prinzipiellen geprüften Studie war die Evaluation der Platzhalterfunktion einer makroporösen e-PTFE Membran, um die von rhBMP-2 induzierten Knochenbildung unter Nutzung eines differenzierenden Onlaydefektmodells zu definieren. Methoden: Routinemäßig wurden supraalveoläre parodontale Defekte mit der kritischen Größe von 5,6 mm um die dritten und vierten Prämolaren bei 4 jungen adulten Labrodormischhunden geschaffen. Alle Quadranten erhielten rhBMP-2 (0.4 mg) in einem resorbierbaren Kollagenschwamm (ACS). Kontralaterale Quadranten bei den aufeinander folgenden Tieren wurden zufällig ausgewählt, um zusätzlich eine domförmige makroporöse e-PTFE Membran über das rhBMP-2/ACS Implantat oder keine zusätzliche Therapie zu erhalten. Die gingivalen Lappen wurden so präpariert, dass sie die e-PTFE Membran und Zähne bedeckten und vernäht. Die Tiere wurden 8 Wochen nach der Operation getötet und für histologische Untersuchungen vorbereitet. Ergebnisse: Die Heilung war komplikationslos ohne Exposition der Membran. Die neue Knochenbildung betrug durchschnittlich (±SD) 4.7±0.2 mm (98%) und 4.5±0.4 mm (94%) der Defekthöhe für die Quadranten, die rhBMP-2/ACS mit der e-PTFE Membran erhielten oder rhBMP-2/ACS allein (p>0,05). Im Kontrast dazu war das regenerierte Knochenfeld signifikant erweitert bei den Kieferquadranten, die rhBMP-2/ACS mit e-PTFE Membran erhielten im Vergleich zu denjenigen mit rhBMP-2/ACS allein (9.3±2.7 vs. 5.1±1.1 mm2; p<0.05). Die Zementbildung war in beiden Behandlungsgruppen ähnlich. Ankylosen gefährdeten die parodontalen Regeneration in allen Flächen. Schlussfolgerungen: Die Ergebnisse zeigen, dass die neue makroporöse Platzhalter e-PTFE Membran als Schablone nützlich ist, um die rhBMP-2/ACS induzierte alveoläre Knochenbildung zu betonen. Résumé Contexte: Des technologies utilisant la protéine-2 osseuse morphogénétique humaine recombinée (rhBMP-2) ont montré qu'elle permettait d'augmenter significativement la formation d'os alvéolaire. Les limites du biomatériel (vecteur), cependant, ont restreint leur potentiel biologique aux indications pour lesquels des forces compressives pourraient limiter le volume d'os en formation. L'objectif de cette étude fut d'évaluer le potentiel d'un dispositif en ePTFE macro-poreux permettant de créer un espace pour définir la formation d'os alvéolaire induit par la rhBMP-2 en utilisant un modèle discriminatoire de lésion. Méthodes: Des lésions parodontales supra-alvéolaires de taille critique, 5,6 mm, furent créées autour des troisièmes et quatrièmes prémolaires chez 4 Labrador adultes. Chaque quadrant a été traité par des éponges de collagène résorbables utilisé comme vecteur (ASC) contenant rhBMP-2 (0.4 mg). Les quadrants contralatéraux des animaux furent aléatoirement distribués pour recevoir (ou pas) en plus un dispositif macro-poreux en ePTFE, en forme de dôme sur les implants de rhBMP-2/ACS. Les lambeaux furent déplacés pour recouvrir le dispositif en ePTFE et les dents et suturés. Les animaux furent sacrifiés après 8 semaines pour fournir des observations histologiques de la cicatrisation. Résultats: La cicatrisation ne posait pas de problèmes et on ne nota pas d'exposition des dispositifs. La moyenne de la formation osseuse était de (±SD) 4.7±0.2 mm (98%) et 4.5±0.4 mm (94%) de la hauteur de la lésion, respectivement, pour les quadrants ayant été traités par la rhBMP-2/ACS avec le dispositif en ePTFE ou la rhBMP-2/ACS seule (p>0.05). A l'inverse, la surface osseuse régénérée était significativement plus importante dans les quadrants traités par la rhBMP-2/ACS et les dispositifs en ePTFE par rapport au site traités seulement par la rhBMP-2/ACS (9.3±2.7 vs. 5.1±1.1 mm2; p<0.05). La formation cémentaire était similaire pour les deux groupes de traitement. L'ankylose compromettait la régénération parodontale dans tous les sites. Conclusions: Ces résultats suggèrent que le dispositif en ePTFE macro-poreux, qui assure un espace, semble convenir comme standard pour définir la formation osseuse induite par la rhBMP-2/ACS. [source]

Functional tissue engineering for tendon repair: A multidisciplinary strategy using mesenchymal stem cells, bioscaffolds, and mechanical stimulation,

JOURNAL OF ORTHOPAEDIC RESEARCH, Issue 1 2008
David L. Butler
Abstract Over the past 8 years, our group has been continuously improving tendon repair using a functional tissue engineering (FTE) paradigm. This paradigm was motivated by inconsistent clinical results after tendon repair and reconstruction, and the modest biomechanical improvements we observed after repair of rabbit central patellar tendon defects using mesenchymal stem cell-gel-suture constructs. Although possessing a significantly higher stiffness and failure force than for natural healing, these first generation constructs were quite weak compared to normal tendon. Fundamental to the new FTE paradigm was the need to determine in vivo forces to which the repair tissue might be exposed. We first recorded these force patterns in two normal tendon models and then compared these peak forces to those for repairs of central defects in the rabbit patellar tendon model (PT). Replacing the suture with end-posts in culture and lowering the mesenchymal stem cell (MSC) concentration of these constructs resulted in failure forces greater than peak in vivo forces that were measured for all the studied activities. Augmenting the gel with a type I collagen sponge further increased repair stiffness and maximum force, and resulted in the repair tangent stiffness matching normal stiffness up to peak in vivo forces. Mechanically stimulating these constructs in bioreactors further enhanced repair biomechanics compared to normal. We are now optimizing components of the mechanical signal that is delivered in culture to further improve construct and repair outcome. Our contributions in the area of tendon functional tissue engineering have the potential to create functional load-bearing repairs that will revolutionize surgical reconstruction after tendon and ligament injury. © 2007 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 26:1,9, 2008 [source]

Retention of 125I-labeled recombinant human bone morphogenetic protein-2 by biphasic calcium phosphate or a composite sponge in a rabbit posterolateral spine arthrodesis model

JOURNAL OF ORTHOPAEDIC RESEARCH, Issue 5 2002
John Louis-Ugbo
The purpose of this study was to characterize the retention kinetics of recombinant human bone morphogenetic protein-2 (rhBMP-2) applied to two calcium-based delivery matrices. Biphasic calcium phosphate (BCP) and a composite containing BCP in an absorbable collagen sponge (BCP/ACS) were evaluated using a spinal fusion model in rabbits. rhBMP-2 labeled with radioactive iodine (125I) was used as a tracer to assess in vivo retention of rhBMP-2 in the presence of these materials (nine animals per material studied). Over a 36 day study period, animals were assessed for the following: percent administered dose retained at the implant site as measured by scintigraphic imaging (counting) with a gamma camera (all animals), radiography of the implant site (all animals), radioactivity in blood and plasma (all animals), and radioactivity in the urine and feces (three animals for each material). Radioactivity data were corrected for the decay of 125I and the attenuation between the implant in vivo and the gamma camera. Differences observed between the two materials for the area under the retention vs. time profile (AUC; 988%day for BCP vs. 1070%day for BCP/ACS, p = 0.57) and the mean residence time (MRT; 10.2 days for BCP vs. 7.6 days for BCP/ACS, p = 0.06) were not statistically significant. Initial retention/incorporation of rhBMP-2 was slightly higher for rhBMP-2/BCP/ACS than for rhBMP-2/BCP (96.8% vs. 86.0%, p lt; 0.05). Animals receiving rhBMP-2/BCP showed a longer terminal retention half-life (t1/2) than did those receiving rhBMP-2/BCP/ACS (7.5 vs. 4.5 days, p < 0.05). The urinary radioactivity recovery data supported the data obtained by scintigraphy. Over the 36 day collection period, essentially complete recovery of radioactivity (dose) in urine was observed for rhBMP-2/BCP and rhBMP-2/BCP/ACS and the majority of the radioactivity (approximately 95%) was soluble in trichloroacetic acid, suggesting extensive catabolism of rhBMP-2 before renal excretion. Fecal recovery of radioactivity was low, approximately 2,3%. In conclusion, rhBMP-2 was retained at the implant site when delivered with either BCP or BCP/ACS based on mean residence time and area under the retention curve vs. time profile. Use of these matrices resulted in detectable rhBMP-2 levels at the surgical site for over a week in contrast to data reported with several other matrices that lasted less time. Systemic catabolism and elimination of the rhBMP-2 was extensive and systemic presence of the protein was negligible. © 2002 Orthopaedic Research Society. Published by Elsevier Science Ltd. All rights reserved. [source]

A novel model of wound healing in the SCID mouse using a cultured human skin substitute

AUSTRALASIAN JOURNAL OF DERMATOLOGY, Issue 1 2009
Martin L Windsor
SUMMARY Studies of skin graft behaviour in rodent excisional wound models are limited by the dominance of wound contracture and graft sloughing as primary healing responses. To slow skin contraction, polytetrafluoroethylene (Teflon) rings were inserted into dorso-lateral full-thickness wounds in SCID mice. Cultured skin substitutes (OrCel), composed of cultured human keratinocytes and fibroblasts in a bovine collagen sponge, were implanted within the rings. Examination and histology of grafts 14 days later showed graft take in four of six recipients, with 90% epithelialization and wound contraction of 31,47%. Immunohistochemical studies, using human-specific antisera to distinguish graft from host tissues, showed that regenerated tissue was predominantly human. Staining with anticytokeratin, revealed a multilayered, stratified neoepidermis. HBG were identified in keratinocytes in all epidermal layers. Langerhans cells were absent. Antihuman vimentin, used as a fibroblast marker, confirmed that cells of the neodermis were primarily of human origin. Neoepidermal keratinocytes, primarily in the basal and suprabasal layers, were also stained. Results suggest that the poly(tetrafluoroethylene) ring inhibited graft sloughing and provided a more favourable environment for the skin substitute to regenerate a substantially normal human skin. [source]

A cell leakproof PLGA-collagen hybrid scaffold for cartilage tissue engineering

BIOTECHNOLOGY PROGRESS, Issue 3 2010
Naoki Kawazoe
Abstract A cell leakproof porous poly(DL -lactic-co-glycolic acid) (PLGA)-collagen hybrid scaffold was prepared by wrapping the surfaces of a collagen sponge except the top surface for cell seeding with a bi-layered PLGA mesh. The PLGA-collagen hybrid scaffold had a structure consisting of a central collagen sponge formed inside a bi-layered PLGA mesh cup. The hybrid scaffold showed high mechanical strength. The cell seeding efficiency was 90.0% when human mesenchymal stem cells (MSCs) were seeded in the hybrid scaffold. The central collagen sponge provided enough space for cell loading and supported cell adhesion, while the bi-layered PLGA mesh cup protected against cell leakage and provided high mechanical strength for the collagen sponge to maintain its shape during cell culture. The MSCs in the hybrid scaffolds showed round cell morphology after 4 weeks culture in chondrogenic induction medium. Immunostaining demonstrated that type II collagen and cartilaginous proteoglycan were detected in the extracellular matrices. Gene expression analyses by real-time PCR showed that the genes encoding type II collagen, aggrecan, and SOX9 were upregulated. These results indicated that the MSCs differentiated and formed cartilage-like tissue when being cultured in the cell leakproof PLGA-collagen hybrid scaffold. The cell leakproof PLGA-collagen hybrid scaffolds should be useful for applications in cartilage tissue engineering. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010 [source]

Evaluation of a new biodegradable membrane to prevent gingival ingrowth into mandibular bone defects in minipigs

CLINICAL ORAL IMPLANTS RESEARCH, Issue 1 2009
Daniel S. Thoma
Abstract Objective: The aim of this study was to test whether a synthetic, biodegradable membrane made of polyethylene glycol (PEG) can prevent soft-tissue ingrowth into alveolar defects. Material and methods: In each of 16 minipigs, three mandibular premolars were bilaterally extracted. Three months later, acute standardized defects (diameter 8 mm, depth 8 mm) were prepared. Four treatment modalities were randomly allocated to the defects: (1) PEG membrane plus collagen sponge, (2) polylactide (PLA) membrane plus collagen sponge, (3) collagen sponge alone, and (4) empty defect. Animals were sacrificed at 10 days (n=5), 21 days (n=5), or 2 months (n=6) after treatment. Qualitative and quantitative histological evaluations of soft-tissue ingrowth and bone regeneration were performed on nondecalcified ground sections. For statistical analysis, the Mann,Whitney,Wilcoxon test, the Kruskal,Wallis, and the paired t -test were applied. P -values were adjusted using the Dunnett,Hsu adjustment. Results: At 10 days, the PEG membrane group showed the least soft-tissue ingrowth (mean value ,0.75 mm; range ,1.35 to ,0.10), followed by the PLA membrane group ,0.18 mm (,0.80 to 0.44), the collagen group 0.04 mm (,0.65 to 0.73), and the empty defects 0.60 mm (,0.08 to 1.29). Statistically significant differences were observed between the PEG membrane group and the empty defects (P<0.05). At 21 days, the highest percentage of newly formed bone was found in the PEG membrane group (mean 28.4%; range 21.6,35.2) compared with 23.7% (16.9,30.5; PLA membrane), 15.2% (8.2,22.2; collagen group), and 21.6% (14.5,28.8; empty defects). Statistically significant differences were only found between the PEG membrane group and the collagen group (P<0.05). At 2 months, the tested parameters revealed no statistically significant differences between the groups. Conclusion: The experimental PEG membrane applied in the present study successfully prevented collapse of the covering soft tissues to a degree similar to the PLA membrane. The combination of a collagen sponge and the PEG membrane showed the least soft-tissue ingrowth at 10 days and promoted more bone formation at 21 days. [source]

Control of pore structure and size in freeze-dried collagen sponges

Bone morphogenetic proteins in tissue engineering: the road from laboratory to clinic, part II (BMP delivery)

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE, Issue 2-3 2008
P. C. Bessa
Abstract Bone morphogenetic proteins (BMPs) are cytokines with a strong effect on bone and cartilage growth and with important roles during embryonic patterning and early skeletal formation. BMPs have promising potential for clinical bone and cartilage repair, working as powerful bone-inducing components in diverse tissue-engineering products. Synthetic polymers, natural origin polymers, inorganic materials and composites may be used as carriers for the delivery of BMPs. Carriers range from nanoparticles to complex three-dimensional (3D) scaffolds, membranes for tissue-guided regeneration, biomimetic surfaces and smart thermosensitive hydrogels. Current clinical uses include spinal fusion, healing of long bone defects and craniofacial and periodontal applications, amongst others. BMP-2 and BMP-7 have recently received approval by the US Food and Drug Administration (FDA) for specific clinical cases, delivered in absorbable collagen sponges. Considering the expanding number of publications in the field of BMPs, there are prospects of a brilliant future in the field of regenerative medicine of bone and cartilage with the use of BMPs. Copyright © 2008 John Wiley & Sons, Ltd. [source]