CI Reactive Red (ci + reactive_red)

Distribution by Scientific Domains


Selected Abstracts


Influence of cosurfactant in microemulsion systems for color removal from textile wastewater

JOURNAL OF CHEMICAL TECHNOLOGY & BIOTECHNOLOGY, Issue 1 2005
Leocadia Terezinha Cordeiro Beltrame
Abstract Microemulsion systems have proved very efficient in color removal from textile wastewater using n -butyl alcohol as cosurfactant. The cosurfactant has a very important role in microemulsified systems, as it is responsible for their stability, mainly in systems formed by ionic surfactants. Although very efficient, n -butyl alcohol is partially soluble in water, which would permit its passage to the effluent. In this work, isoamyl and octyl alcohols, due to their lower solubility in water, were used as cosurfactants to evaluate their influence in color removal. The colorimetry system used was the CIE L*a*b* (CIELAB) color space and CIE L*a*b* color difference (,E*ab). The wastewater used in this study was the reactive exhausted dye liquor from a dye house (first discharge) containing Procion Yellow H-E4R (CI Reactive Yellow 84), Procion Blue H-ERD (CI Reactive Blue 160) and Procion Red H-E3B (CI Reactive Red 120). The obtained results were modeled using an experimental planning (the Scheffé net) and evaluated through isoresponse diagrams by correlation graphs between experimental values and those obtained by the models with an error lower than 4%. All the optimized systems were very efficient and more than 94% of the dyes contained in the effluent were removed. The microemulsion load capacity was determined using a synthetic solution containing, the same dyes present in the reactive exhausted dyebath, but 200 times concentrated, and the dyes extraction was more than 99.6%. By comparing n -butyl, isoamyl and octyl alcohols, it was observed that the system using isoamyl alcohol presented slightly better color removal and much higher load capacity than the n -butyl and octyl alcohols. Copyright © 2004 Society of Chemical Industry [source]


Use of microemulsions for removal of color and dyes from textile wastewater

JOURNAL OF CHEMICAL TECHNOLOGY & BIOTECHNOLOGY, Issue 6 2004
Tereza Neuma de Castro Dantas
Abstract One of the major environmental problems in the textile dyeing industry is the removal of color from effluents. The present study deals with color removal from effluents using microemulsions. The wastewater used in this study was the reactive exhausted dye liquor from a dyeing house containing Procion Yellow H-E4R (CI Reactive Yellow 84), Procion Blue H-ERD (CI Reactive Blue 160) and Procion Red H-E3B (CI Reactive Red 120). Color removal was determined by CIEL*a*b* (CIELAB) color space, CIEL*a*b* color difference, ,E*ab, and absorbance. Color removal greater than 95% was achieved, attaining values lower than the consent requirements established by the Environmental Agency. It was observed that pH is an important parameter in color removal and effluent pH correction from 10.44 to 9 before extraction improved results. The results obtained were modeled using the Scheffé net method and evaluated through the construction of isoresponse diagrams by correlation graphics between experimental values and those obtained through use of model equations, providing an experimental error of less than 2%. The optimized method very efficiently removed all dyes contained in the effluent. The same microemulsion phase recovered after the extraction process can be used at least a further 14 times and all the extractions gave good color removal. Copyright © 2004 Society of Chemical Industry [source]


Modification of silk with aminated polyepichlorohydrin to improve dyeability with reactive dyes

COLORATION TECHNOLOGY, Issue 2 2007
Xie Weibin
Reactive dyes have almost complete exhaustion and ideal fixation on aminated polyepichlorohydrin pretreated silk without addition of salt or alkali. The effects of varying pretreatments and dyeing conditions were studied. The dyeing behaviour of CI Reactive Red 15 on modified silk under pH 6 was investigated. Dyeings of modified silk showed good wash fastness, dry and wet rub fastnesses as well as light fastness. The quality of the dyed silks obtained after pretreatment was shown to be satisfactory and the dyeing effluent was less polluted. [source]


Pretreatment of cotton with poly(vinylamine chloride) for salt-free dyeing with reactive dyes

COLORATION TECHNOLOGY, Issue 4 2005
Wei Ma
Poly(vinylamine chloride) has been investigated as a pretreatment for the salt-free dyeing of cotton with reactive dyes. Dye fixation was found to be much higher than by conventional dyeing without pretreatment, even in the presence of a large amount of salt. The influence of pretreatment conditions on dye fixation, such as pad,bake variables and the concentration of poly(vinylamine chloride), has been studied. The dyeing behaviour of CI Reactive Red 2 on pretreated cotton was examined and found to follow a Langmuir-type adsorption curve. Dyed cotton pretreated with poly(vinylamine chloride) showed excellent wash fastness and good rub fastness. It is concluded that poly(vinylamine chloride) is effective as a pretreatment for salt-free dyeing with reactive dyes. [source]