Home About us Contact
|
Home About us Contact | ||
|
|
||
Change Material (change + material)
Kinds of Change Material Selected AbstractsExperimental Investigation of Performances of Microcapsule Phase Change Material for Thermal Energy StorageCHEMICAL ENGINEERING & TECHNOLOGY (CET), Issue 2 2010G. Fang Abstract Performances of microcapsule phase change material (MPCM) for thermal energy storage are investigated. The MPCM for thermal energy storage is prepared by a complex coacervation method with gelatin and acacia as wall materials and paraffin as core material in an emulsion system. A scanning electron microscope (SEM) was used to study the microstructure of the MPCM. In thermal analysis, a differential scanning calorimeter (DSC) was employed to determine the melting temperature, melting latent heat, solidification temperature, and solidification latent heat of the MPCM for thermal energy storage. The SEM micrograph indicates that the MPCM has been successfully synthesized and that the particle size of the MPCM is about 81 ,m. The DSC output results show that the melting temperature of the MPCM is 52.05,°C, the melting latent heat is 141.03 kJ/kg, the solidification temperature is 59.68,°C, and the solidification latent heat is 121.59 kJ/kg. The results prove that the MPCM for thermal energy storage has a larger phase change latent heat and suitable phase change temperature, so it can be considered as an efficient thermal energy storage material for heat utilizing systems. [source] Preparation and thermal properties of microencapsulated phase change material for enhancing fluid flow heat transferHEAT TRANSFER - ASIAN RESEARCH (FORMERLY HEAT TRANSFER-JAPANESE RESEARCH), Issue 1 2007Yu Rao Abstract Microencapsulated phase change material (MEPCM) is formed by packing PCM into a microcapsule with a solid but flexible shell. MEPCM can be used to enhance liquid cooling performance considerably. In this paper, experiments on the preparation of MEPCM with a double-layered shell have been conducted. An in-situ polymerization microencapsulation process was used to prepare the MEPCM with melamine resin as the shell material and n-Docosane (C22H46) as the core material. Interesting parameters like the size of the prepared MEPCM, the core mass fraction in the MEPCM, and the thermal storage capability of the prepared MEPCM have been measured and analyzed. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(1): 28,37, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/htj.20138 [source] Energetic and exergetic analysis of a domestic water tank with phase change materialINTERNATIONAL JOURNAL OF ENERGY RESEARCH, Issue 3 2008C. Solé Abstract Although water is a cheap and effective medium for thermal energy storage, other options are currently being studied, to increase the storage density or to reduce the cost of the storage. The authors have been developing a system which combines the advantages of stratified sensible heat storage and latent, phase change heat storage; i.e. a hot water storage tank with stratification where a phase change material (PCM) is included into a spiral tube installed in the top of the tank. The PCM used was a granular PCM,graphite compound of about 90 vol.% of sodium acetate trihydrate and 10 vol.% graphite. This paper presents the results of an experimental investigation of the performance of the new storage concept, and of a conventional hot water storage tank for comparison. The data are further analysed with respect to the energetic and exergetic performance of the two systems. Copyright © 2007 John Wiley & Sons, Ltd. [source] Effect of phase change material on passive thermal heating of a greenhouseINTERNATIONAL JOURNAL OF ENERGY RESEARCH, Issue 4 2006Nisha Kumari Abstract In this study, a periodic analysis of a greenhouse with combination of phase change material (PCM) and insulation as a north wall has been developed for thermal heating. The thermal model is based on Fourier analysis. Effect of distribution of PCM thickness on plant and room air temperature has been studied in detail. The plant and room air temperature have been evaluated with and without north wall. Numerical computations have been carried out for a typical winter day of New Delhi. On the basis of numerical results, it is inferred that (i) there is a significant effect of PCM north wall and heat capacity of plant temperature during off-sunshine hour due to storage effect and (ii) the rate of heat flux inside greenhouse from north wall is maximum for least thickness of PCM. Copyright © 2005 John Wiley & Sons, Ltd. [source] Dynamics of energy storage in phase change drywall systemsINTERNATIONAL JOURNAL OF ENERGY RESEARCH, Issue 4 2005K. Darkwa Abstract Experimental evaluations of manufactured samples of laminated and randomly mixed phase change material (PCM) drywalls have been carried out and compared with numerical results. The analysis showed that the laminated PCM drywall performed thermally better. Even though there was a maximum 3% deviation of the average experimental result from the numerical values, the laminated PCM board achieved about 55% of the phase change process as against 48% for the randomly distributed drywall sample. The laminated board sample also released about 27% more latent heat than the randomly distributed type at the optimum time of 90 min thus validating previous simulation study. Given the experimental conditions and assumptions the experiment has proved that it is feasible to develop the laminated PCM technique for enhancing and minimising multi-dimensional heat transfers in drywall systems. Further practical developments are however encouraged to improve the overall level of heat transfer. Copyright © 2005 John Wiley & Sons, Ltd. [source] Two methods for calculating the amount of refrigerant required for cyclic temperature testing of insulated packagesPACKAGING TECHNOLOGY AND SCIENCE, Issue 2 2007Kazuhisa Matsunaga Abstract This paper describes two calculation methods for estimating the amount of refrigerant required to maintain the temperature inside a small insulating container within a desired range under cyclic temperature conditions. The first calculation method is for a phase change material (PCM) that absorbs and releases heat by melting and solidifying. The PCM used in this study had a phase change temperature of 23.5°C (74.3°F). An equation for estimating the amount of the PCM required under cyclic conditions is shown. Test packages were constructed to meet USP Controlled Room Temperature (CRT) requirements. Several cyclic tests were conducted with the calculated amount of PCM in the test packages. The results showed that the calculated amount of PCM did maintain the inside temperature within the range 21.4,25.8°C (70.5,78.4°F) throughout the tests. This range met the USP CRT requirement. The second calculation method is for unfrozen gel packs that absorb and release heat by changing temperature. The amount of unfrozen gel pack required to maintain temperature within the USP range was calculated. Several cyclic tests were conducted with the calculated amount of gel packs. The calculated amount was enough to meet the USP requirement. Good agreement between the experimental and calculated temperature profiles was also found. Copyright © 2006 John Wiley & Sons, Ltd. [source] Experimental Investigation of Performances of Microcapsule Phase Change Material for Thermal Energy StorageCHEMICAL ENGINEERING & TECHNOLOGY (CET), Issue 2 2010G. Fang Abstract Performances of microcapsule phase change material (MPCM) for thermal energy storage are investigated. The MPCM for thermal energy storage is prepared by a complex coacervation method with gelatin and acacia as wall materials and paraffin as core material in an emulsion system. A scanning electron microscope (SEM) was used to study the microstructure of the MPCM. In thermal analysis, a differential scanning calorimeter (DSC) was employed to determine the melting temperature, melting latent heat, solidification temperature, and solidification latent heat of the MPCM for thermal energy storage. The SEM micrograph indicates that the MPCM has been successfully synthesized and that the particle size of the MPCM is about 81 ,m. The DSC output results show that the melting temperature of the MPCM is 52.05,°C, the melting latent heat is 141.03 kJ/kg, the solidification temperature is 59.68,°C, and the solidification latent heat is 121.59 kJ/kg. The results prove that the MPCM for thermal energy storage has a larger phase change latent heat and suitable phase change temperature, so it can be considered as an efficient thermal energy storage material for heat utilizing systems. [source] Microencapsulation of n -Eicosane as Energy Storage MaterialCHINESE JOURNAL OF CHEMISTRY, Issue 5 2004Xiao-Zheng Lan Abstract For heat energy storage application, polyurea microcapsules containing phase change material, n -eicosane, were synthesized by using interfacial polymerization method with toluene-2,4-diisocyanate (TDI) and diethylenetriamine (DETA) as monomers in an emulsion system. Poly(ethylene glycol)octyl-phenyl ether (OP), a nonionic surfactant, was the emulsifier for the system. The experimental result indicates that TDI was reacted with DETA in a mass ratio of 3 to 1. FT-IR spectra confirm the formation of wall material, polyurea, from the two monomers, TDI and DETA. Encapsulation efficiency of n -eicosane is about 75%. Microcapsule of n -eicosane melts at a temperature close to that of n -eicosane, while its stored heat energy varies with core material n -eicosane when wall material fixed. Thermo-gravimetric analysis shows that core material n -eicosane, micro- n -eicosane and wall material polyurea can withstand temperatures up to 130, 170 and 250 °C, respectively. [source] Phase Change Materials for the Improvement of Heat Protection,ADVANCED ENGINEERING MATERIALS, Issue 5 2005M. Rossi Abstract The use of phase change materials (PCM) that absorb and store heat by an aggregate state change for applications in fire fighters' protective clothing was studied. PCM can help improve the heat protection of the clothing combination, and thus contribute to a reduction of the weight of the equipment and an improvement of the wearing comfort. It was found that PCM have a positive effect on heat protection, but the efficiency of the heat absorption depends on the location of the PCM layer and the incident heat intensity. Furthermore, as the PCM used was made of paraffin, its burning behavior has to be improved for a commercial use in fire fighters' protective clothing. [source] Structure and properties of phase change materials based on HDPE, soft Fischer-Tropsch paraffin wax, and wood flourJOURNAL OF APPLIED POLYMER SCIENCE, Issue 3 2010M. E. Mngomezulu Abstract Phase-change materials based on high density polyethylene (HDPE), soft Fischer-Tropsch paraffin wax (M3), and alkali-treated wood flour (WF) were investigated. The blend and composite samples were prepared by melt mixing using a Brabender Plastograph, followed by melt pressing. They were characterized in terms of their morphology, as well as thermal, mechanical, thermo-mechanical, and water absorption properties. Although SEM micrographs showed some evidence of intimate contact between the WF particles and the HDPE matrix as a result of alkali treatment, poor filler dispersion, and interfacial adhesion were also observed. Partial immiscibility of the HDPE and the M3 wax was noticed, with the WF particles covered by wax. There was plasticization of the HDPE matrix by the wax, as well as partial cocrystallization, inhomogeneity and uneven wax dispersion in the polymer matrix. The HDPE/WF/M3 wax composites were more homogeneous than the blends. The presence of wax reduced the thermal stability of the blends and composites. Both the presence of M3 wax and WF influenced the viscoelastic behavior of HDPE. The HDPE/M3 wax blends showed an increase in the interfacial amorphous content as the wax content increases, which resulted in the appearance of a ,-relaxation peak. The presence of M3 wax in HDPE reduced the mechanical properties of the blends. For the composites these properties varied with WF content. An increase in wax content resulted to a decrease in water uptake by the composites, probably because the wax covered the WF particles and penetrated the pores in these particles. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010 [source] Fabrication, structures, and properties of acrylonitrile/methyl acrylate copolymers and copolymers containing microencapsulated phase change materialsJOURNAL OF APPLIED POLYMER SCIENCE, Issue 5 2007Na Han Abstract The polyacrylonitrile-methyl acrylate (AN/MA mole ratio 100/0,70/30) copolymers and copolymers (AN/MA mole ratio 85/15) containing up to 40 wt % of microencapsulated n -octadecane (MicroPCMs) are synthesized in water. The MicroPCMs were incorporated at the step of polymerization. The effect of the MA mole ratio and MicroPCMs content on structures and properties of the copolymers were studied by using Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H NMR), scanning electronic microscope (SEM), differential scanning calorimetry (DSC), thermogravimetry analysis (TG), gel permeation chromatography (GPC), and X-ray diffraction (XRD). The feeding ratio agreed well with the composition of the AN/MA copolymers. The copolymers are synthesized in the presence of MicroPCMs. The melting point moves to lower temperature (206°C), while the decomposition temperature moves to higher temperature (309°C) with increasing of the MA mole ratio and microcapsules content. The number,average molecular weight of the copolymer is ,30,000. The crystallinity of the copolymer decreases with increasing of the MA mole ratio and microcapsules content. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2776,2781, 2007 [source] Role of Mn of PEG in the morphology and properties of electrospun PEG/CA composite fibers for thermal energy storageAICHE JOURNAL, Issue 3 2009Changzhong Chen Abstract As an aim toward developing novel class of form-stable polymer-matrix phase change materials for thermal energy storage, ultrafine composite fibers based on cellulose acetate and polyethylene glycol (PEG) with five different molecular weight (Mn) grades were prepared by electrospinning. The effects of Mn of PEG on morphology, thermal properties and mechanical properties of the composite fibers were studied by field emission scanning electron microscopy, differential scanning calorimetry, and tensile testing, respectively. It was found that the composite fibers were smooth and cylindrical shape, with the average diameters ranging from about 1000 to 1750 nm which increased with Mn of PEG. Thermal analysis results showed that the composite fibers imparted balanced thermal storage and release properties in different temperature ranges with the variation of Mn of PEG. Thermal cycling test indicated that the prepared composites had excellent thermal stability and reliability even they were subjected to 100 heating-cooling thermal cycles. © 2009 American Institute of Chemical Engineers AIChE J, 2009 [source] | ||||||||||||||||