Block Material (block + material)

Distribution by Scientific Domains

Kinds of Block Material

  • cell block material


  • Selected Abstracts


    Incidence and cytological features of pulmonary hamartomas indeterminate on CT scan

    CYTOPATHOLOGY, Issue 3 2008
    A. Saqi
    Objective:, Pulmonary hamartomas have a characteristic heterogeneous radiological appearance. However, when composed predominantly of undifferentiated mesenchymal fibromyxoid component, their homogeneous appearance on computed tomography is indeterminate for malignancy. Rendering an accurate preoperative diagnosis in these cases can alter management. The aim of this study was to determine the incidence and accuracy of cytodiagnosis for hamartomas ,indeterminate' by imaging. Methods:, We retrospectively reviewed records for hamartomas diagnosed by transthoracic fine needle aspiration (FNA) including immediate impressions and final diagnoses. Cytological features evaluated included the presence of fibromyxoid stroma, bronchioloalveolar cell hyperplasia, fibroadipose tissue, cartilage and smooth muscle. Results:, Eighteen (1.3%) hamartomas were identified from 1355 transthoracic FNAs. The immediate impression was hamartoma in 13 (72%), carcinoid in one (6%), mucinous bronchioloalveolar carcinoma in two (11%) and non-diagnostic in two (11%). The final diagnosis of hamartoma in cases diagnosed as carcinoid, mucinous bronchioloalaveolar carcinoma and non-diagnostic on immediate impression was rendered following assessment of all cytological material. Conclusion:, Overall, FNAs are highly reliable for diagnosing hamartomas even when composed principally of undifferentiated mesenchymal fibromyxoid stroma, especially with the aid of all available preparations including Diff-Quik smears, Papanicolaou smears, ThinPreps and cell block material. [source]


    Cytology of metastatic cervical squamous cell carcinoma in pleural fluid: Report of a case confirmed by human papillomavirus typing

    DIAGNOSTIC CYTOPATHOLOGY, Issue 5 2009
    Roberto G. Gamez M.D.
    Abstract Cervical squamous cell carcinomas are rarely the cause of malignant effusions. Their identification can be relatively easy when keratinizing atypical squamous cells are present, but may be very difficult when only nonkeratinizing malignant cells are present. We present the case of a 47-year-old woman who presented with a large left pleural effusion after having recently completed chemoradiation therapy for stage IIB cervical squamous cell carcinoma. Cytologic examination of the fluid showed a uniform population of single atypical cells with finely vacuolated cytoplasm, ectoendoplasmic demarcation, cell-in-cell arrangements, and short rows of cells with intervening "windows," all features reminiscent of mesothelial cells. No keratinization or three-dimensional cell clusters were identified. A panel of immunohistochemical stains was performed on the cell block material, and the atypical cells were positive for cytokeratin 5/6, p63, and p16 but not for cytokeratin 7, calretinin, WT1, or Ber-EP4 or TTF1. These findings were consistent with metastatic squamous cell carcinoma. HPV DNA determination and typing by PCR confirmed the presence of HPV16 in an aliquot of pleural fluid. This is to our knowledge the first reported case of pleural fluid involved by metastatic squamous cell carcinoma where HPV DNA testing was used to confirm the origin of the metastasis. Despite its rarity, metastatic nonkeratinizing squamous cell carcinoma should be considered when a single cell population of large atypical cells is found in effusions. Immunoperoxidase stains and HPV testing can be performed to establish the diagnosis and confirm the origin from a cervical primary. Diagn. Cytopathol. 2009. © 2009 Wiley-Liss, Inc. [source]


    HBME-1 and CK19 are highly discriminatory in the cytological diagnosis of papillary thyroid carcinoma

    DIAGNOSTIC CYTOPATHOLOGY, Issue 8 2008
    FRCPA, Min-En Nga MRCPath
    Abstract The cytologic diagnosis of papillary thyroid carcinoma is straightforward in most instances. However, there are some mimics including goitrous nodules and Hurthle cell neoplasms. Many studies have shown the combination of HBME-1 and CK19 expression to be useful in reaching a correct histologic diagnosis on tissue sections. We aim to assess the value of these markers in the setting of cell blocks prepared from needle aspiration specimens. We performed immunohistochemical staining of HBME-1 and CK19 on cell block material from 22 thyroid nodules that also had follow-up histology. Both CK19 and HBME-1 were strongly positive in all nine cases of papillary thyroid carcinoma, the latter showing distinct luminal accentuation. In the non-papillary carcinomas, none showed positivity for both HBME-1 and CK19. Two of six Hurthle cell neoplasms were positive for CK19, however all were negative for HBME-1. One of nine goitrous nodules was strongly positive for HBME-1 with luminal/membranous staining, but this were negative for CK19. The sensitivity, specificity and positive predictive value of HBME-1 in distinguishing between papillary thyroid carcinoma and goitrous nodules/Hurthle cell neoplasms were found to be 100%, 92.9% and 0.9, respectively; and that of HBME-1 and CK19 combination was 100%, 100% and 1. We thus conclude that the combination of positive HBME-1 (luminal/membranous) and CK 19 (cytoplasmic) staining on cell blocks of thyroid cytologic specimens is highly discriminatory in the diagnostic workup for papillary thyroid carcinoma. Diagn. Cytopathol. 2008; 36: 550,556. © 2008 Wiley-Liss, Inc. [source]


    Utility of CD10 and RCCma in the diagnosis of metastatic conventional renal-cell adenocarcinoma by fine-needle aspiration biopsy

    DIAGNOSTIC CYTOPATHOLOGY, Issue 1 2005
    Aylin Simsir M.D.
    Abstract The cytologic diagnosis of primary conventional renal-cell adenocarcinoma (cRCC) is usually straightforward; however, metastatic cRCC must be distinguished from a variety of neoplasms with clear-cell features. CD10, a cell membrane-associated neutral endopeptidase, and renal-cell carcinoma marker (RCCma), an antibody against human proximal tubular brush border antigen, have recently been shown to be useful in the diagnosis of cRCC. We compared CD10 and RCCma in cell block material from fine-needle aspiration biopsies (FNABs) to assess their utility in the diagnosis of metastatic cRCC, in cytologic specimens. Seven primary and sixteen metastatic cRCCs were immunostained with CD10 and RCCma. The immunoreactivity results were compared with those of a variety of neoplasms originating from other sites such as the liver, lungs, breast, and the gastrointestinal tract. The sensitivity and specificity of CD10 for cRCC were 100% and 59%, respectively. The sensitivity and specificity of RCCma for cRCC were 35% and 100%, respectively. We conclude that CD10 has limited value in confirming the diagnosis of cRCC because of its low specificity. RCCma, when positive, is highly specific for cRCC, but its low sensitivity hinders its diagnostic usefulness. Diagn. Cytopathol. 2005;33:3,7. © 2005 Wiley-Liss, Inc. [source]


    Diagnostic value of GLUT-1 immunoreactivity to distinguish benign from malignant cystic squamous lesions of the head and neck in fine-needle aspiration biopsy material

    DIAGNOSTIC CYTOPATHOLOGY, Issue 5 2004
    Michael F. Weiner M.D.
    Abstract The distinction of cystic squamous-cell carcinoma (SCC) from benign cystic squamous lesions (BCSLs) of the head and neck can be problematic on fine-needle aspiration biopsy (FNAB) material, particularly when BCSLs display epithelial reactive atypia or when SCC is well differentiated. Glucose transporter 1 (GLUT-1), a facilitative cell surface glucose transport protein, is aberrantly expressed in many cancers including oral and hypopharyngeal SCC. We evaluated the expression of GLUT-1 by immunochemistry on FNAB material to determine its value in distinguishing cystic SCC from BCSL of the head and neck. A 5-yr retrospective review of all head and neck cystic squamous lesions having FNAB specimens with cell block material, radiological studies, and histological confirmation was performed at our institution. Cell block material from 24 cystic squamous lesions, including 8 (33%) BCSL (7 branchial cleft cysts and 1 thyroglossal duct cyst[TDC]) and 16 (67%) metastatic SCCs with cystic/liquefactive degeneration, was retrieved and immunostained with anti-GLUT-1. GLUT-1 expression was considered positive when at least 10% of squamous cells exhibited distinct cell membrane reactivity. Positive GLUT-1 immunostaining was detected in all 16 SCCs and in none of the 8 BCSLs. In the carcinoma cases, the majority of malignant cells exhibited GLUT-1 reactivity; only a minor population of well-differentiated SCC cells displaying keratinization and arranged as squamous pearls did not express GLUT-1. GLUT-1 expression in cell block material can help to distinguish cystic SCCs from BCSLs of the head and neck. In conjunction with clinical and radiological correlation, GLUT-1 immunoreactivity can be an important diagnostic aid when the cytological findings are ambiguous. Diagn. Cytopathol. 2004;31:294,299. © 2004 Wiley-Liss, Inc. [source]


    Characteristics of transient heat transfer during quenching of a vertical hot surface with a falling liquid film

    HEAT TRANSFER - ASIAN RESEARCH (FORMERLY HEAT TRANSFER-JAPANESE RESEARCH), Issue 6 2007
    Hiroaki Matsueda
    Abstract An experimental study has been conducted to elucidate characteristics of transient heat transfer during quenching of a vertical hot surface with a falling liquid film. The experiment was done at atmospheric pressure for the following conditions: an initial surface temperature from 200 to 400°C, a subcooling of 20, 80 K, average velocity of 0.52, 1.24 m/s, and the block material is copper and carbon steel. The surface temperature and heat flux are estimated from the measured temperatures in the block during the quench by a two-dimensional inverse solution. It follows that as the position of wetting advances downward, the position at which the heat flux becomes a maximum also advances downward. The time at which the position of maximum heat flux begins to move is one of the most important parameters and can be predicted by a proposed correlation. In addition, it is revealed that the maximum heat flux for copper depends on the length to which it occurs from the leading edge. © 2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(6): 345, 360, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/htj.20167 [source]


    Corrosion of magnesium alloys in commercial engine coolants

    MATERIALS AND CORROSION/WERKSTOFFE UND KORROSION, Issue 1 2005
    G. Song
    Abstract A number of magnesium alloys show promise as engine block materials. However, a critical issue for the automotive industry is corrosion of the engine block by the coolant and this could limit the use of magnesium engine blocks. This work assesses the corrosion performance of conventional magnesium alloy AZ91D and a recently developed engine block magnesium alloy AM-SC1 in several commercial coolants. Immersion testing, hydrogen evolution measurement, galvanic current monitoring and the standard ASTM D1384 test were employed to reveal the corrosion performance of the magnesium alloys subjected to the coolants. The results show that the tested commercial coolants are corrosive to the magnesium alloys in terms of general and galvanic corrosion. The two magnesium alloys exhibited slightly different corrosion resistance to the coolants with AZ91D being more corrosion resistant than AM-SC1. The corrosivity varied from coolant to coolant. Generally speaking, an organic-acid based long life coolant was less corrosive to the magnesium alloys than a traditional coolant. Among the studied commercial coolants, Toyota long life coolant appeared to be the most promising one. In addition, it was found that potassium fluoride effectively inhibited corrosion of the magnesium alloys in the studied commercial coolants. Both general and galvanic corrosion rates were significantly decreased by addition of KF, and there were no evident side effects on the other engine block materials, such as copper, solder, brass, steel and aluminium alloys, in terms of their corrosion performance. The ASTM D 1384 test further confirmed these results and suggested that Toyota long life coolant with 1%wt KF addition is a promising coolant for magnesium engine blocks. [source]